Aquaporin

From Infogalactic: the planetary knowledge core
(Redirected from Aquaporins)
Jump to: navigation, search
Aquaporin
300px
Crystallographic structure of aquaporin 1 (AQP1) PDB 1j4n
Identifiers
Symbol Aquaporin
Pfam PF00230
InterPro IPR000425
PROSITE PDOC00193
SCOP 1fx8
SUPERFAMILY 1fx8
TCDB 1.A.8

Aquaporins are integral membrane proteins from a larger family of major intrinsic proteins (MIP) that form pores in the membrane of biological cells.[1]

Genetic defects involving aquaporin genes have been associated with several human diseases.[2][3] The 2003 Nobel Prize in Chemistry was awarded jointly to Peter Agre for the discovery of aquaporins,[4] and Roderick MacKinnon for his work on the structure and mechanism of potassium channels.[5] The plasma membranes of a variety of different animal and plant cells contain aquaporins through which water can flow more rapidly inside the cell than by diffusing through the phospholipid bilayer.[6]

Function

Aquaporins are "the plumbing system for cells," said Agre. Every cell is primarily water. "But the water doesn’t just sit in the cell, it moves through it in a very organized way. The process occurs rapidly in tissues that have these aquaporins or water channels."

For many years, scientists assumed that water leaked through the cell membrane, and some water does. "But the very rapid movement of water through some cells was not explained by this theory," said Agre.[7]

Aquaporins selectively conduct water molecules in and out of the cell, while preventing the passage of ions and other solutes. Also known as water channels, aquaporins are integral membrane pore proteins. Some of them, known as aquaglyceroporins, also transport other small uncharged solutes, such as glycerol, CO2, ammonia and urea across the membrane, depending on the size of the pore. For example, the aquaporin 3 channel has a pore width of 8-10 Ångströms and allows the passage of hydrophilic molecules ranging between 150-200 Da. However, the water pores are completely impermeable to charged species, such as protons, a property critical for the conservation of the membrane's electrochemical potential difference.[8]

Water molecules traverse through the pore of the channel in single file. The presence of water channels increases membrane permeability to water.

Many human cell types express them, as do certain bacteria and many other organisms, such as plants for which it is essential for the water transport system[9] and tolerance to drought and salt stresses.[10]

Discovery

File:Aquaporin.jpg
Illustration of aquaporin molecule

Agre said he discovered aquaporins "by serendipity." His lab had an N.I.H. grant to study the Rh blood group antigens. They isolated the Rh molecule but a second molecule, 28 kilodaltons in size (and therefore called 28K) kept appearing. At first they thought it was a piece of the Rh molecule, or a contaminant, but it turned out to be an undiscovered molecule with unknown function. It was abundant in red blood cells and kidney tubes, and related to proteins of diverse origins, like the brains of fruit flies, bacteria, the lenses of eyes, and plant tissues.

In most cells, water moves in and out by osmosis through the lipid component of cell membranes. Due to the relatively high water permeability of some epithelial cells it was long suspected that some additional mechanism for water transport across membranes must exist. But it was not until 1992 that the first aquaporin, ‘aquaporin-1’ (originally known as CHIP 28), was reported by Peter Agre, of Johns Hopkins University.[11]

The pioneering discoveries and research on water channels by Agre and his colleagues resulted in the presentation of a Nobel Prize in Chemistry to Agre in 2003.[5] In 1999, together with other research teams, Agre reported the first high-resolution images of the three-dimensional structure of an aquaporin, namely, aquaporin-1.[12] Further studies using supercomputer simulations have identified the pathway of water as it moves through the channel and demonstrated how a pore can allow water to pass without the passage of small solutes.[13] However the first report of protein mediated water transport through membranes was by Gheorghe Benga in 1986.[14][15] This publication that preceded Agre's first publication on water membrane transport proteins has led to a controversy that Benga's work was adequately recognized by neither Agre nor the Nobel Prize Committee.[16] There is a long history of water pores, starting in 1957.[17] There have been many reviews of the history.[18]

Structure

File:AQP1.png
Schematic diagram of the 2D structure of aquaporin 1 (AQP1) depicting the six transmembrane alpha-helices and the five interhelical loop regions A-E.
File:Aquaporin Z.png
The 3D structure of aquaporin highlighting the 'hourglass'-shaped water channel that cuts through the center of the protein.

Aquaporin proteins are made up of six transmembrane α-helices arranged in a right-handed bundle, with the amino and the carboxyl termini located on the cytoplasmic surface of the membrane.[8][19] The amino and carboxyl halves of the sequence show similarity to each other, in what appears to be a tandem repeat. Some researchers believe that this results from an early evolution event that saw the duplication of the half-size gene. There are also five interhelical loop regions (A – E) that form the extracellular and cytoplasmic vestibules. Loops B and E are hydrophobic loops that contain the highly, although not completely conserved, asparagineprolinealanine (NPA) motif, which overlap the middle of the lipid bilayer of the membrane forming a 3-D 'hourglass' structure where the water flows through. This overlap forms one of the two well-known channel constriction sites in the peptide, the NPA motif and a second and usually narrower constriction known as 'selectivity filter' or ar/R selectivity filter.

Aquaporins form tetramers in the cell membrane, with each monomer acting as a water channel.[8] The different aquaporins contain differences in their peptide sequence, which allows for the size of the pore in the protein to differ between aquaporins. The resultant size of the pore directly affects what molecules are able to pass through the pore, with small pore sizes only allowing small molecules like water to pass through the pore.

X-ray profiles show that aquaporins have two conical entrances. This hourglass shape could be the result of a natural selection process toward optimal permeability. It has been shown that conical entrances with suitable opening angle can indeed provide a large increase of the hydrodynamic channel permeability.[20]

NPA motif

Using computer simulations, it has been suggested that the orientation of the water molecules moving through the channel assures that only water passes between cells, due to the formation of a single line of water molecules. The water molecules move through the narrow channel by orienting themselves in the local electrical field formed by the atoms of the channel wall. Upon entering, the water molecules face with their oxygen atom down the channel. Midstream, they reverse orientation, facing with the oxygen atom up.[21]

Why this rotation occurs is not entirely clear yet. Some researchers identified an electrostatic field generated by the two aquaporin half-helices HB and HE as the reason for the rotation of water molecules. Others suggested that it is caused by the interaction of hydrogen bonds between the oxygen of the water molecule and the asparagines in the two NPA motifs. Moreover, whether the rotation of water molecules has any biological significance is still being discussed. Early studies speculated that the "bipolar" orientation of water molecules keep them from conducting protons via the Grotthuss mechanism, while still permitting a fast flux of water molecules.[22] More recent studies question this interpretation and emphasize an electrostatic barrier as the reason for proton blockage. In the latter view, the rotation of water molecules is only a side-effect of the electrostatic barrier. At present (2008), the origin of the electrostatic field is a matter of debate. While some studies mainly considered the electric field generated by the protein's half-helices HB and HE, others emphasized desolvation effects as the proton enters the narrow aquaporin pore.

ar/R selectivity filter

File:AQP-channel.png
Schematic depiction of water movement through the narrow selectivity filter of the aquaporin channel.

The ar/R (aromatic/arginine) selectivity filter is a cluster of amino acids that help bind to water molecules and exclude other molecules that may try to enter the pore. It is the mechanism by which the aquaporin is able to selectively bind water molecules (hence allowing them through) and prevent other molecules from entering. The ar/R filter is a tetrad that is formed by two amino acid residues from helices B (HB) and E (HE) and two residues from loop E (LE1 and LE2), found on either side of the NPA motif. The ar/R region is usually found towards the extracellular vestibule, approximately 8 Å above the NPA motif and is often the narrowest part of the pore. The narrow pore acts to weaken the hydrogen bonds between the water molecules allowing the water to interact with the positively charged arginine, which also acts as a proton filter for the pore.

Species distribution

In mammals

There are thirteen known types of aquaporins in mammals, and six of these are located in the kidney,[23] but the existence of many more is suspected. The most studied aquaporins are compared in the following table:

Type Location[24] Function[24]
Aquaporin 1 Water reabsorption
Aquaporin 2 Water reabsorption in response to ADH
Aquaporin 3 Water reabsorption and glycerol permeability
Aquaporin 4 Water reabsorption

In plants

In plants water is taken up from the soil through the roots, where it passes from the cortex into the vascular tissues. There are two routes for water to flow in these tissues, known as the apoplastic and symplastic pathways. The presence of aquaporins in the cell membranes seems to serve to facilitate the transcellular symplastic pathway for water transport. When plant roots are exposed to mercuric chloride, which is known to inhibit aquaporins, the flow of water is greatly reduced while the flow of ions is not, supporting the view that there exists a mechanism for water transport independent of the transport of ions: aquaporins.

Aquaporins in plants are separated into five main homologous subfamilies, or groups:[25]

  • Plasma membrane Intrinsic Protein (PIP)[26]
  • Tonoplast Intrinsic Protein (TIP)[27]
  • Nodulin-26 like Intrinsic Protein (NIP)[28]
  • Small basic Intrinsic Protein (SIP)[29]
  • X Intrinsic Protein (XIP)

These five subfamilies have later been divided into smaller evolutionary subgroups based on their DNA sequence. PIPs cluster into two subgroups, PIP1 and PIP2, whilst TIPs cluster into 5 subgroups, TIP1, TIP2, TIP3, TIP4 and TIP5. Each subgroup is again split up into isoforms e.g. PIP1;1, PIP1;2.

The silencing of plant aquaporins has been linked to poor plant growth and even death of the plant.

The gating of aquaporins is carried out to stop the flow of water through the pore of the protein. This may be carried out for a number of reasons, for example when the plant contains low amounts of cellular water due to drought.[30] The gating of an aquaporin is carried out by an interaction between a gating mechanism and the aquaporin, which causes a 3D change in the protein so that it blocks the pore and, thus, disallows the flow of water through the pore. In plants, it has been seen that there are at least two forms of aquaporin gating. These are gating by the dephosphorylation of certain serine residues, which has been seen as a response to drought, and the protonation of specific histidine residues in response to flooding. The phosphorylation of an aquaporin has also been linked to the opening and closing of petals in response to temperature.[31][32]

Clinical significance

Aquaporin-1 (AQP1) is found in choroid plexus, contributes to production of CSF and AQP4 is found on perivascular and ependymal cells.

If aquaporin could be manipulated, that could potentially solve medical problems such as fluid retention in heart disease and brain edema after stroke.[7]

There have been two clear examples of diseases identified as resulting from mutations in aquaporins:

A small number of people have been identified with severe or total deficiency in aquaporin-1. It is interesting to note that they are, in general, healthy, but exhibit a defect in the ability to concentrate solutes in the urine and to conserve water when deprived of drinking water. Mice with targeted deletions in aquaporin-1 also exhibit a deficiency in water conservation due to an inability to concentrate solutes in the kidney medulla by countercurrent multiplication.

In addition to its role in genetically determined nephrogenic diabetes insipidus, aquaporins also play a key role in acquired forms of nephrogenic diabetes insipidus (disorders that cause increased urine production).[35] Acquired nephrogenic diabetes insipidus can result from impaired regulation of aquaporin-2 due to administration of lithium salts (as a treatment for bipolar disorder), low potassium concentrations in the blood (hypokalemia), high calcium concentrations in the blood (hypercalcemia), or a chronically high intake of water beyond the normal requirements (e.g., due to excessive habitual intake of bottled water or coffee).

It has been found that autoimmune reactions against aquaporin 4 produce Devic's disease.[36]

Aquaporin from kidneys is influenced by vasopressin.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 A Conversation With Peter Agre: Using a Leadership Role to Put a Human Face on Science, By Claudia Dreifus, New YorkTimes, January 26, 2009
  8. 8.0 8.1 8.2 Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. 24.0 24.1 Unless else specified in table boxes, then ref is: Lua error in package.lua at line 80: module 'strict' not found. Page 842
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. Lua error in package.lua at line 80: module 'strict' not found.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Aquaporins at the US National Library of Medicine Medical Subject Headings (MeSH)
  • Animation (MPEG file at nobel.se)
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.