Avanti (car)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

The Avanti is an American performance sports coupe based on the Studebaker Avanti. A succession of five different ownership arrangements produced Avantis independently from Studebaker. After the closure of Studebaker's South Bend factory on December 20, 1963, cars with the name Avanti were initially produced from left-over Studebaker components and later from General Motors and Ford chassis and engines. These are not replica cars, for they were made by Avanti Motor Company.

Altman and Newman

1976 Avanti II

After Studebaker ended production at South Bend, the "Avanti" model name, tooling, Studebaker truck production rights and parts and plant space were bought by local Studebaker dealers, Nate and Arnold Altman and Leo Newman, who incorporated as Avanti Motor Corporation and hand-built a small number of cars.[1] Leo Newman ran the Studebaker truck parts division which enabled the company to be profitable at its outset. According to Stu Chapman, Studebaker Director of Advertising & Public Relations 1964-1966, in his book 'My Father The Car: Memoirs Of My Life With Studebaker', there was talk with Studebaker of reintroducing the Avanti to Studebaker showrooms in 1965/66, along with ambitious plans for rebadging an Isuzu Bellett as an entry level Studebaker, and combining with Canadian Motor Industries. This would have taken control and production away from the South Bend board who at the time was determined to discontinue auto production no matter that Studebaker was the only car company in history to discontinue a make that was still profitable.

The Altman brothers introduced a slightly modified version of the car in 1965 under the brand name "Avanti II".[2] which initially had a 327-in³ (5.4 L) Chevrolet Corvette engine. This evolved to the 400, then the small-block 350, and then the 305 for 1981.[3] The 305 V8 had electronic engine controls, 155 hp (116 kW), and GM's Turbo 350 automatic transmission with lockout. Building one of the 1980's Avanti IIs required 10 to 12 weeks, depending on special color or upholstery orders.[3] The last Avanti II made came off the line with a V6 engine from Roush and only one was made. All Avanti IIs and their successors were built on the Studebaker-designed chassis, from 1963 to 1987.[citation needed] After Nate Altman's death, Arnold Altman ran the company until it was sold in 1982.

Year Engine Power Wheelbase Length Width Chassis Transmission Instrumentation
1965 327CID V8 300 hp (224 kW) 109 in (2,769 mm)[4] 192.5 in (4,890 mm) 70.4 in (1,788 mm) Full perimeter with X 4-speed manual or automatic[4] Speedometer, tachometer,[4] fuel gauge, ammeter, temperature gauge, oil pressure gauge, vacuum pressure gauge[5]

Stephen H. Blake

On October 1, 1982, real-estate developer Stephen H. Blake bought the rights to the Avanti II.[citation needed] The state of Indiana guaranteed $1.9 million in loans to Avanti, as part of the financial package offered Blake when he bought the company.[6] He made modifications to the car, which had remained unchanged since the production of the Avanti II model began in the mid-1960s. Rectangular headlights and modern plastic body-colored bumpers were introduced.[7] He also dropped the "II" in the car's name. All subsequent cars were called the "Avanti".[citation needed] Blake's company declared bankruptcy and he resigned in February 1986.[8]

Michael E. Kelly

1989, Kelly built Avanti II Convertible

The Avanti Motor Company was re-purchased by Michael Eugene Kelly. He moved the production to Ohio in 1987.

The company had the second-generation Avanti's styling originated by Tom Kellogg, the youngest member of the original Avanti Studebaker design team, at first called the AVX in the mid 90's. Tom Kellogg was fatally injured in a car accident in California on August 14, 2003.[9]

Cafaro years

1991 Avanti four-door sedan

Real estate man John J. Cafaro purchased the rights to Avanti Motor Company in 1988. With the help of the State of Ohio, he moved all Avanti production from South Bend - its birthplace - to the Rust Belt area of Youngstown, Ohio. In 1988 and 1989 Avanti made two-door coupes and a convertible. The 1988 Avanti were called the "Silver Year" models, marking 25 years since the Avanti's introduction. The 1989 Avanti were given a ground effects packaging.

Cafaro was noted for making the four door Avanti in 1990, an idea from the original designer, Raymond Loewy.[citation needed] Cafaro concentrated on the four door to the detriment of the original coupe, the company's primary vehicle. Only 90 were made at the Youngstown plant. In 1991 Cafaro went back to building the convertible before the plant was closed later that year.

Michael E. Kelly returns

M. E. Kelly moved Avanti operations from Ohio to Georgia in 1999 and produced redesigned Avanti automobiles in Villa Rica, Georgia from 2000 to 2005, before moving to Cancun, Mexico. From 2004, Ford chassis and engines were used. In October 2005 an internet report said "Avanti Motors" had "recently announced a new relationship with Ford Motor Company and was planning a big comeback".[10] An internet report in 2006 said Kelly had sold the company in 1988 and repurchased it in 1999 from Cafaro of Ohio; and that the company had established a new factory and showroom in Villa Rica, Georgia. In early 2006, Kelly moved Avanti production to a new plant in Cancun, Mexico, but the company floundered after M. E. Kelly was arrested in December 2006 on fraud counts related to an alleged ponzi scheme in the United States.

The last Avanti to date rolled off the line in Cancun, Mexico in March of 2006. All the Mustang-based Avantis used V-8 engines, with the option of a Ford V-6. Only one 2006 Avanti was built with a Ford V-6 engine. The factory and showroom were emptied in 2011 and have been sold. Many extremely rare Studebaker and Avanti concepts and racing vehicles that were on the second floor of the building in Cancun have been moved elsewhere and/or sold.[11][12][13][14]

References

  • Lua error in package.lua at line 80: module 'strict' not found.
  1. Langworth, p. 278
  2. Langworth, p. 257
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Springfield Union, January 27, 1985, Page 34.
  7. Oregonian, October 14, 1983, Page 75.
  8. Plain Dealer, February 27, 1986, Page 109.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Spinelli M, Game On: Avanti Motors Hopes to Survive and Thrive in 2006 at jalopnik.com, October 11, 2005
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

External links