Caledonian Railway Bridge
| Caledonian Railway Bridge | |
|---|---|
| File:King George V Bridge - geograph.org.uk - 628011.jpg
The Caledonian Railway Bridge on the left and the George V Bridge on the right
|
|
| Crosses | River Clyde |
| Characteristics | |
| Material | Steel |
| Total length | 702 feet 6 inches (214.12 m) |
| History | |
| Opened | 1905 (second bridge) |
The Caledonian Railway Bridge is a bridge crossing the River Clyde at Broomielaw in Scotland. It is adjacent to Glasgow Central station.
First bridge
The first bridge was built between 1876-1878 for the Caledonian Railway Company, and opened on 1 August 1879[1] It was engineered by Blyth and Cunningham and built by Sir William Arrol & Co.[1] It consisted of wrought iron lattice girders linked at the top by a light arched lattice girder, and carried on a cast iron arch (visible in the photograph) over twin piers in the river.[1] The piers are formed of cast iron cylinders sunk to bedrock and filled with concrete, and then extended above the river with Dalbeattie granite.[1]
The approach span over Clyde Place to the south was 60 feet (18 m) long, and over Broomielaw to the north of the river was 90 feet (27 m) long.[1] The navigation spans were 164 feet (50 m), 184 feet (56 m) and 152 feet (46 m) long.[1] The bridge carried four tracks into the new Glasgow Central station.[2]
In 1966-1967, the girders and tracks were removed, leaving the pillars in the water, after resignalling meant it was no longer needed.[3]
Second bridge
The current, second bridge was built in 1899-1905 during the expansion of Central Station, to a design by D. A. Matheson, chief engineer of the Caledonian Railway, [3] Arrol and Co. was the contractor for this bridge as well.[3]
The foundations for the bridge are rectangular sunk caissons, sunk by the compressed air chamber method used on the Forth Bridge to a depth of up to 48 feet (15 m) below the river bed.[3] The central span is 194 feet (59 m) long with Linville truss girders 15 feet 9 inches (4.80 m) deep.[3] The parapet girders are around 10 feet (3.0 m) deep, and suspended on curved brackets.[3] There are a minimum of eight parallel main girders in the width.[3] The spans are of lengths 160 feet (49 m), 200 feet (61 m) and 178 feet (54 m), and the structure contains 11,000 tonnes (11,000 long tons; 12,000 short tons) of steel.[3] The total length of the bridge between the abutments is 702 feet 6 inches (214.12 m).[4]
The bridge varies in width from 35 to 62.5 metres (115 to 205 ft), and carries up to ten tracks.[3] It leads immediately into Glasgow Central Station on the north bank of the river.[5] At the time of its opening, it was believed to be the widest railway bridge in existence.[4]
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
External links
 |
Wikimedia Commons has media related to [[commons:Lua error in Module:WikidataIB at line 506: attempt to index field 'wikibase' (a nil value).|Lua error in Module:WikidataIB at line 506: attempt to index field 'wikibase' (a nil value).]]. |
Lua error in package.lua at line 80: module 'strict' not found.
