Chieftain tank

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Chieftain (FV4201)
Chieftain Tank (9628802829).jpg
A Chieftain Mark 11 at the Bovington Tank Museum (2013)
Type Main battle tank
Place of origin United Kingdom
Service history
In service 1966–present
Used by UK, Iran, Iraq, Jordan, Kuwait, Oman
Wars Iran–Iraq War, Gulf War
Production history
Manufacturer Leyland Motors
Specifications
Weight 55 long tons (62 short tons; 56 t)
Length 35 ft 4 in (10.77 m) – gun forward[1]
7.5 m (24 ft 7 in) – hull
Width 12 ft 0 in (3.66 m)[1]
Height 2.9 m (9 ft 6 in)
Crew 4
Armour Glacis: 120 mm (4.7 in) (72°)[2]
Hull sides: 38 mm (1.5 in) (10°)
Turret: 195 mm (7.7 in) (60°)[2]
Main
armament
 L11A5 120 mm rifled gun
Secondary
armament
 2 × L7 Machine Gun
Engine Leyland L60 (multifuel 2-stroke opposed-piston compression-ignition)
750 hp (560 kW) 6 Cyl, 19 litres.
Power/weight 11.1 hp (8.3 kW)/ton (at sprocket)[1]
Transmission TN 12[1]
Suspension Horstmann: Horizontal Coil Spring Suspension Bogies
Ground clearance 1 ft 10 in (0.56 m))[1]
Fuel capacity Lua error in Module:Convert at line 272: attempt to index local 'cat' (a nil value).[1]
Operational
range
 500 km (310 miles) on roads
Speed Road: 48 km/h (30 mph)
Off road: 30 km/h (19 mph)

The Chieftain FV4201 was the main battle tank of the United Kingdom during the 1960s, 1970s and 1980s. A development of the Centurion and therefore a continuation of the British cruiser series, sharing a substantial commonality of parts with both its predecessor and successor. It was the "most formidable main battle tank in the world" with, at the time of its introduction in 1966 the most powerful main gun and most effective armour of any tank yet made.[3][not in citation given] The Chieftain also introduced a supine (reclining backwards) driver position, enabling a heavily sloped hull with reduced height. Faster than the Centurion, able to maintain its speed longer than the Leopard 1 and out-gunning its contemporaries, the Chieftain was also the first tank to enhance its (already superior) armour with composite armour add-ons, beginning with Chobham developed in the UK.

It remained in service until replaced by the Challenger 1.

Development

The Chieftain was an evolutionary development of the successful cruiser line of tanks that had emerged at the end of the Second World War. British engineers had learned during the war that their tanks often lacked sufficient protection and firepower compared to those fielded by the enemy, and that this had led to high casualty levels when faced with the superior German tanks in World War II. The Centurion addressed this to a great degree, combining higher levels of armour and an improved gun, which made it at least equal to any of the contemporary medium tanks. However, the introduction of the Soviet IS-3 heavy tank forced the introduction of their own Conqueror heavy tank, armed with a 120 mm (4.7 in) gun. A single design combining the firepower of the Conqueror's 120 mm gun with the mobility and general usefulness of the Centurion would be ideal.

Leyland, who had been involved in Centurion, had built their own prototypes of a new tank design in 1956, and these led to a War Office specification for a new tank. The General Staff specification drew on the experience of Centurion tanks in the Korean War, as well as that of the Conqueror tank. The tank was expected to be able to engage the enemy at long range and from defensive positions, be proof against medium artillery. To this end, the gun was to have a greater angle of depression than the 8 degrees of Conqueror and better frontal armour. The tank was expected to achieve a firing rate of 10 rounds per minute in the first minute and six per minute for the following four.

The first few prototypes were provided for troop trials from 1959, this identified a number of changes. Changes to address engine vibration and cooling resulted in redesign of the rear hull. This increased the design weight to nearly 50 tons and as such the suspension (which had been designed for 45 tons) was strengthened. Track pads had to be fitted to protect roads from damage and the ground clearance increased. The design was accepted in the early 1960s.

Britain and Israel had collaborated on the development in its latter stages[4] with a view to Israel purchasing and domestically producing the vehicle. Two prototypes were delivered as part of a four year trial.[5] However, it was eventually decided not to sell the marque to the Israelis,[6] which prompted them to follow their own development programme.[7]

In 1957, NATO had specified that its forces should use multi-fuel engines. The early BL Engine delivered around 450 bhp (340 kW) to the sprocket, which meant a top road speed of around 25 mph (40 km/h) and cross country performance was limited. This was further hampered by the Horstmann coil spring suspension, which made it a challenge to drive cross country and provide the crew with a comfortable ride. Due to the cylinder linings being pressure fitted, coolant leaks within the cylinder block were common, resulting in white smoke billowing from the exhaust.

In the late 1970s, engine design changed with the introduction of Belzona which was used to improve the lining seals. Engine output also increased, with later engines delivering some 850 bhp (630 kW) to the sprocket. This meant better performance and an increased speed. However, cross-country performance remained limited.

Several aspects of Chieftain design were trialled by the production of the FV4202 "40-ton Centurion" with a reclined driver position and mantleless gun mounting.[citation needed]

Design

Chieftain display at the Bovington tank museum, 2006

The design of the Chieftain included a heavily sloped hull and turret, which greatly increased the effective thickness of the frontal armour – 388 mm (15.3 in) on the glacis (from an actual thickness of 120 mm (4.7 in)), and 390 mm (15.4 in) on the turret (from 195 mm (7.7 in)).[2] It had a mantletless turret, in order to take full advantage of reclining the vehicle up to ten degrees in a hull-down position.

For security reasons, early prototypes had a canvas screen covering the mantlet and a sheet metal box mounted over the sloping glacis plate to disguise the configuration of the vehicle.[8]

The driver lay semi-recumbent in the hull when his hatch was closed down, which helped to reduce the profile of the forward glacis plate. The commander, gunner and loader were situated in the turret. To the left side of the turret was a large searchlight with infra-red capability in an armoured housing.[9]

The Leyland L60 engine is a two-stroke opposed piston design intended for multi-fuel use so that it could run on whatever fuel was available. In practice, the engine did not deliver the expected power, and was unreliable, estimated to have a 90% breakdown rate, but improvements were introduced to address this. Primary problems included, cylinder liner failure, fan drive problems and perpetual leaks due to vibration and badly routed pipework. However, as the engine power improved, the tank itself became heavier.[9]

The tank was steered by conventional tillers hydraulically actuating onto external brake discs. The discs worked via the epicyclic gearbox providing "regenerative" steering. The gearbox was operated motorcycle-style with a kick up/kick down "peg" on the left, which actuated electro-hydraulic units in the gearbox; the accelerator cable was operated by the right foot. In the turret, the loader was on the left and the gunner on the right of the gun with the commander behind the gunner. The suspension was of the Horstmann bogie type, with large side plates to protect the tracks and provide stand-off protection from hollow charge attack.[9]

Detail of the 120 mm L11A5 rifled gun

The main armament was the 120 mm L11A5 rifled gun. This differed from most contemporary main tank armament as it used projectiles and charges that were loaded separately, as opposed to a single fixed round. The charges were encased in combustible bags. Other tank guns, such as on the Conqueror, needed to store the spent shell cartridges or eject them outside. The combustible charges were stored in 36 recesses surrounded by a pressurized[1] water/glycol mixture – so-called "wet-stowage". In the event of a hit penetrating the fighting compartment, the jacket would rupture, soaking the charges and preventing a catastrophic propellant explosion.[10] As there was no shell case, the firing of the charge was by vent tubes automatically loaded from a ten-round magazine on the breech.[1] Due to the length of the gun, which required balancing, and the need for storage space, the turret has a large overhang to the rear. This contains radios, ammunition, fire control equipment and has further stowage externally.[1]

The gun could fire a wide range of ammunition, but the most commonly loaded types were high explosive squash head (HESH), armour-piercing discarding sabot (APDS), or practice round equivalents for both types. The Chieftain could store up to 64 projectiles (though a maximum of 36 APDS, limited by the propellant stowage). The gun was fully stabilised, with a fully computerized integrated control system. The secondary armament consisted of a coaxial L8A1 7.62 mm machine gun, and another 7.62 mm machine gun mounted on the commander's cupola.[9] An advantage of using two-part ammunition was that in the case of inert rounds like APDS, the loader could reach for the next round and hold it in his lap, ready to load, while the gunner was acquiring the target and firing. This practice increases the rate of fire, but would be hazardous with one-piece ammunition.[11]

Chieftain had an NBC protection system, which Centurion lacked.[9]

The initial Fire-control system (FCS) was the Marconi FV/GCE Mk 4. A .50-inch (12.7 mm) ranging gun was mounted above the main gun (with 300 rounds available). This fired ranging shots out to a maximum of 2,600 yards (2,400 m), at which point the tracer in the ranging rounds burned out although the high explosive tip still created a visible "splash" on impact. The tank commander had a rotating cupola with nine vision blocks -giving all round view, plus the 7.62 mm machine-gun and an infrared (IR) capable projector coaxial with the weapon. The aiming systems were provided for both the gunner and the tank commander; they had 1x or 10x selectable magnification power, increasing to x15 in the Mk5 and beyond, and they were replaceable with IR vision systems for night operations (3x magnification power). The commander could rotate his cupola to bring his sight onto a target and then engage the mechanism that brought the turret round on to the correct bearing so that the gunner could complete the aiming.[9]

The commander's controls had over-ride capability on those of the gunner.[9]

The left side of the turret had a large searchlight with an electrically controlled infra-red filter inside an armoured box, with a relatively long range – up to 1–1.5 kilometres (0.62–0.93 mi).[12]

From the beginning of the 1970s, the Mk 3/3 version replaced the ranging gun with a Barr and Stroud LF-2 laser rangefinder with a 10 km (6.2 mi) range. This allowed engagements at much longer ranges, and also could be linked to the fire control system, allowing more rapid engagements and changes of target.[9]

On later models, fire control was provided by the Marconi IFCS (Improved Fire Control System), using a digital ballistic computer. The upgrade was not finished until the end of 1980, when some examples (but not the majority) had the IR searchlight replaced with TOGS. Many later examples had Stillbrew armour, intended to defeat Soviet 125 mm tank guns and heavy anti-tank missiles. These became the Mark 13 version.[12]

Service

Chieftain tanks of 14th/20th King's Hussars on parade with urban camouflage, Straße des 17. Juni, West Berlin, 18 June 1989.

Like its European competitors, Chieftain found a large export market in the Middle East, but unlike Centurion, it was not adopted by any other NATO or Commonwealth country.

Chieftain proved itself capable in combat and able to be upgraded with enhancements, both for overall improvement and to meet local requirements. The marque was continuously upgraded until the early 1990s, when it was replaced by Challenger 1. The final Chieftain version, which was used by the British Army until 1995, incorporated "Stillbrew" armour named after Colonel Still and John Brewer from the Military Vehicles and Engineering Establishment (MVEE), the Improved Fire Control System (IFCS) and the Thermal Observation Gunnery Sight (TOGS). The last British Regiment equipped with Chieftain was the 1st Royal Tank Regiment, which was based at Aliwal Barracks, Tidworth.

File:Tank Museum, KubinkaDSC02369.JPG
Ex-Iranian Chieftain Mk.5 at the Kubinka Tank Museum
File:Well used tanks^ - geograph.org.uk - 1521684.jpg
Chieftain target hulks at Lulworth Ranges 2008

The first model was introduced in 1967. Chieftain was supplied to at least six countries, including Iran, Kuwait, Oman and Jordan. An agreement for sales to Israel and local production was cancelled by the British Government in 1969,[13] despite considerable Israeli technical and tactical input into the development of the tank, especially the capacity to operate successfully in desert environments, and the provision for the tank to make good use of hull-down positioning. Two examples were delivered to and extensively trialled by the Israeli Armoured Corps. This experience spurred the creation of the indigenous Israeli Merkava, the development programme of which was led by General Israel Tal, who had worked closely with the British in the Anglo-Israeli Chieftain project.[5] The largest foreign sale was to Iran, which, at the recommendation of General Tal,[5] took delivery of 707 Mk-3P and Mk-5P, 125–189 FV-4030-1, 41 ARV and 14 AVLB before the 1979 revolution.[14] Further planned deliveries of the more capable 4030 series were cancelled at that point.

It was in the Middle East that the Chieftain was to see all of its operational experience. First, it was used extensively by Iran during the Iran–Iraq War of 1980–88, including the largest tank battle of the war, with mixed results as many suffered from chronic engine problems.[15] The Chieftain remains in service in Iran, the Mobarez tank being a locally upgraded version.

Kuwaiti Chieftains participated in the 1990 Iraq–Kuwait War. The Kuwaiti 35th Armored Brigade fought at the Battle of the Bridges against elements of the Iraqi Hammurabi and Medina divisions before withdrawing over the Saudi border[16] 136 Kuwaiti Chieftains were lost. Only seven tanks managed to survive the war with Iraq.[17][18]

Specifications

  • Crew: 4
  • Combat weight: 55 tons
  • Overall length: 10.8 m (35 ft 5.2 in) gun forward
  • Hull length: 7.5 m (24 ft 7.3 in)
  • Height: 2.9 m (9 ft 6.2 in)
  • Width: 3.5 m (11 ft 5.8 in)
  • Powerplant: Leyland L60 (diesel, multi-fuel compression ignition) 695 bhp (518 kW)
  • Range: 500 km (310 mi)
  • Maximum road speed: 48 km/h (30 mph)
  • Cross-country speed: 30 km/h (19 mph)
  • Armour: turret front, 195 mm (7.7 in) RHA (60°)
Armament

Mark 1 and Mark 2 models had a coaxial Browning .50-inch (12.7 mm) ranging machine guns prior to the introduction of the laser rangefinder.

Equipment
  • Twin Clansman VRC 353 VHF Radio sets
  • 1 C42 1 B47 Larkspur VHF radios
  • 2 X 6-barrel smoke dischargers on turret
  • Bulldozer blade (optional – fitted to one tank per squadron)

Variants

Chieftain Mk 1
40 training vehicles for 1965–1966. Issued to 1 RTR and 5 RTR for troop trials.
Chieftain Mk 2
First service model with 650 hp engine.
Chieftain Mk 3
Extra equipment fitted giving rise to several sub-marks. New cupola.
Chieftain Mk.5
Final production variant, with upgrades to the engine and NBC protection system.
Chieftain Mk.6-9
Incremental upgrades to earlier Marks of tanks, including addition of Clansman radios.
Chieftain Mk.10
Mark 9 upgrade, addition of Stillbrew Crew Protection Package to the turret front and turret ring.
Chieftain Mk.11
Mark 10 upgrade, searchlight replaced with the Thermal Observation and Gunnery System (TOGS), manufactured by Barr and Stroud.
Chieftain Mk.12/13
Proposed further upgrades, cancelled when the Challenger 2 was introduced.
Chieftain 800
Chieftain with Chobham armour and new power train
Chieftain 900
Chieftain with Chobham armour, new power train, and Centaur fire control system
FV4205 AVLB
Bridge-laying vehicle
File:Chieftain ARRV (6064578679).jpg
ARRV
FV4204 ARV/ARRV
Armoured Recovery Vehicle, Armoured Recovery and Repair Vehicle.
An AVRE carrying fascine on Salisbury Plain.
Chieftain AVRE
Armoured Vehicle Royal Engineers, a British Army combat engineering variant used by the Royal Engineers.
Chieftain Marksman
self-propelled anti-aircraft gun version, equipped with the Marksman twin gun turret.
Chieftain Mineclearer
Mine-clearing development.
Chieftain Sabre
Twin 30 mm AA turret.
File:Chieftain lesany.jpg
Khalid variant
Khalid (also designated 4030P2J – P = Phase & J = Jordan)/Shir (Lion) 1
Jordanian with the running gear of the Challenger 1. In essence, this was a transition vehicle from the Chieftain to the Shir 2, which had been intended for Iran but was subsequently cancelled. The Shir 2 tanks became Challenger 1 tanks after reworking at ROF Leeds. The vehicle chassis comprised the front half of a Chieftain hull, Chieftain running gear and the rear of a 4030/2 Chassis (Sloping Hull). This allowed the fitment in the engine bay of a Rolls-Royce CV12 engine producing 1200 bhp at 2,300 rpm.
Weapon Carriers
The Chieftain chassis was adapted to mount air defence weapons ("Marksman" 2 x 35 mm cannon) and a 155 mm howitzer in a number of variants.
Shir 2
Iranian variant. Visible external differences from Chieftain Mk.5 included a sloping rear hull, the removal of the searchlight from the left turret area and the refitting of storage baskets, the removal of the water channel from around the driver's hatch on the glacis plate, modification of the light clusters also on the glacis plate and the enlargement of the sight housing on the commander's cupola.
Mobarez Tank
Iranian upgraded version of Chieftain.

Operators

File:Chieftain operators.png
A map of Chieftain operators in blue with former operators in red

Current operators

  •  Iran: 707 Mk-3P and Mk-5P, 125–189 FV-4030-1, 41 ARV and 14 AVLB obtained before the 1979 revolution. Further planned deliveries of the more capable 4030 series were cancelled at that point. 100 in service as of 2005. (100 in 1990, 250 in 1995, 140 in 2000).[19]
  •  Jordan: 274 Khalid delivered between 1981–1985 + 90 MK3/5 (captured Iranian tanks) from Iraq.[20] 350 in service[when?][citation needed]
  •  Oman: 27 delivered 1981–85.[21]

Former operators

  •  United Kingdom: Used from 1965 to 1995.
  •  Kuwait: 175 in 1976, 143 in 1989, 20 in 1995, 17 in storage in 2000.[22]
  •  Iraq: 50-75 tanks, captured from Iran, in service with Iraqi Army in 1990. Most upgraded to Khalid-level, with air-conditioning for the crew and reinforced armour and night vision.[23]
  •  Israel: 2 delivered for the joint Anglo-Israeli developmental project. In Israeli Armored Corps service for trials 1965–69.[5]

See also

Tanks of comparable role, performance and era

References

Notes
  1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 For Mark 2 according to Norman, AFV Profile No. 19
  2. ↑ 2.0 2.1 2.2 Richard Ogorkiewicz, Cold War, Hot Science: Applied Research in Britain's Defence Laboratories 1945–1990 (2002), p.128-129, edited by Robert Bud & Philip Gummett, NMSI Trading Ltd, ISBN 1-900747-47-2
  3. ↑ Richard M. Ogorkiewicz, Jane's – The Technology of Tanks, Jane's Information Group, p.69
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ 5.0 5.1 5.2 5.3 Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 http://www.tanks-encyclopedia.com/coldwar/UK/FV-4201_Chieftain.php
  10. ↑ Simon Dunstan, Chieftain Main Battle Tank 1965–2003, Osprey Publishing, p.6
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ 12.0 12.1 JP-4 dossier, Main Battle Tanks (1990), pp.35–36, edited by Ed.Ai. 1990, Florence
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found., (Search UK to Iran, 1950–2008)
  15. ↑ Chieftain Main Battle Tank 1965–2003, Osprey Publishing
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Tanki v operacii "Shok i trepet", Aleksei Brusilov, Leonid Karyakin, Tankomaster 2003-08 (Russian: Танки в операции «Шок и трепет», Алексей Брусилов, Леонид Карякин, Танкомастер 2003-08)
  18. ↑ Kuwait – Army Equipment
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found., (Search UK to Jordan, 1950–2008)
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found., (Search UK to Oman, 1950–2008)
  22. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  23. ↑ Stephen Hughes, The Iraqi Threat and Saddam Hussein's Weapons of Mass Destruction, page 304
Bibliography
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Chieftain_tank&oldid=2665455"