Cirrostratus cloud

From Infogalactic: the planetary knowledge core
(Redirected from Cirrostratus)
Jump to: navigation, search
Cirrostratus cloud
Cirrostratus with mock sun
Cirrostratus with mock sun
Abbreviation Cs
Genus Cirrus- "curl of hair" and
-stratus "layered"
Altitude Above 6000 m
(Above 20,000 ft)
Classification Family A (High-level)
Appearance white veil
Precipitation cloud? No, but usually signal the approach of a warm front.

Cirrostratus /ˌsɪrˈstrɑːtəs/ is a high, very thin, generally uniform stratiform genus-type of cloud, composed of ice-crystals. It is difficult to detect and is capable of forming halos when the cloud takes the form of thin cirrostratus nebulosus.[1] The cloud has a fibrous texture with no halos if it is thicker cirrostratus fibratus. On the approach of a frontal system, the cirrostratus often begins as nebulosus and turns to fibratus. If the cirrostratus begins as fragmented fibratus it often means the front is weak. Cirrostratus is usually located above 5.5 km (18,000 ft). Its presence indicates a large amount of moisture in the upper atmosphere.[2]

Cirrostratus at night causing a moon halo

Cirrostratus clouds sometimes signal the approach of a warm front if they form after cirrus and spread from one area across the sky, and thus may be signs that precipitation might follow in the next 12 to 24 hours[3] or as soon as 6–8 hours if the front is fast moving. If the cirrostratus is broken fibratus it can mean that the front is weak and that stratus rather than nimbostratus will be the precipitating cloud (meaning drizzle or snow grains instead of moderate rain or snow). Cumulus humilis or stratocumulus clouds are often found below cirrostratus formations, due to the stable air associated with cirrostratus creating an inversion and restricting convection, causing cumuliform clouds to become flattened. Contrails also tend to spread out and can be visible for up to an hour in cirrostratus.

The phrase "hazy sunshine" is often, as well as referring to haze or light mist, used to refer to the milky look of the sky when cirrostratus is present.

High cloud weather map symbols.
  • Species: Cirrostratus fibratus (Cs fib) is a high fibrous sheet similar to cirrus but with less detached semi-merged filaments. It is reported in the SYNOP code as CH8 or as CH5 or 6 (depending on the amount of sky covered) if increasing in amount. If the high cloud covers the entire sky and takes on the form of a featureless veil, it is classified as cirrostratus of the species nebulosus (Cs neb)[4] and is coded CH7.
  • Varieties: Cirrostratus species have no opacity-based varieties as they are always translucent. Two pattern-based varieties are sometimes seen with the species fibratus. These are the closely spaced duplicatus and wavy undulatus types similar to those seen with cirrus fibratus.[5] Pattern-based varieties are not commonly associated with the species nebulosus due to its lack of features.
  • Supplementary features: Cirrostratus produces no precipitation or virga, and is not accompanied by any accessory clouds.[6]
  • Genitus mother clouds: Cirrostratus fibratus cirrocumulogenitus sometimes appears as the latter cloud flattens and loses some of its stratocumuliform structure. Cirrostratus fibratus cumulonimbogenitus may form if the cirriform top of a mature thundercloud spreads and flattens sufficiently to become a high stratiform cloud.[7]
  • Mutatus mother clouds: Cirrostratus fibratus cirromutatus or cirrocumulomutatus are the result of a complete transformation from cirrus and cirrocumulus genus types. Cirrostratus nebulosis altostratomutatus results when a high grey nebulous altostratus layer thins out into a whitish layer of featureless high cloud.[7]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Ludlum, D. (1991). New York: Alfred A. Knopf. ISBN 0-679-40851-7.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.

External links