Ballistic Recovery Systems

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Ballistic Recovery Systems
Public
Traded as OTC Pink: BRSI
Industry Aerospace
Founded 1980
Founder Boris Popov
Headquarters St. Paul, Minnesota, United States
Key people
 CEO and President Larry Williams
Vice President, Sales & Marketing Gary Moore
Products Parachute systems
Website www.brsaerospace.com

Ballistic Recovery Systems (commonly BRS and BRS Aerospace) is a manufacturer of aircraft ballistic parachutes.

The company was formed in 1980 by Boris Popov of Saint Paul, Minnesota after he survived a 400-foot (120 m) fall in a partially collapsed hang glider in 1975. As a result Popov invented a parachute system which would lower an entire light aircraft safely to the ground, assuring minimal, if any, injuries or casualties among its occupants. Typically with this system there is moderate structural damage to the aircraft immediately after parachute deployment and during the subsequent landing and recovery. The system can be used in the event of loss of control, failure of the aircraft structure, or other in-flight emergencies.[1]

Popov was granted a U.S. patent on 26 August 1986 for the so-called Ballistic Recovery System (BRS) - patent US 4607814 A.[2]

History

BRS was founded in 1980 and introduced its first parachute model two years later in 1982, with the focus on the ultralight aircraft market. The company recorded its first successful aircraft and crew recovery in 1983: Jay Tipton of Colorado.[1]

In 1998 the company collaborated with Cirrus Design (now called Cirrus Aircraft) to develop the first recovery parachute system to be used on a type certified aircraft, the Cirrus SR20. They named the design the Cirrus Airframe Parachute System (CAPS). In 2002 BRS received a supplemental type certificate to install their parachute system in the Cessna 172, followed by the Cessna 182 in 2004 and the Symphony SA-160 in 2006.[1]

In response to the 2008 economic crisis and associated falling orders, the company announced in November 2008 that it would lay-off 25% of its workforce for an indefinite time period.[3]

Products

Ballistic rescue parachutes

Components

A solid-fuel rocket is used to pull the parachute out from its housing and deploy the canopy fully within seconds. Typically on ultralight installations the rocket is mounted on the parachute container. On larger aircraft installations the rocket may be remotely mounted.

Over the years the BRS systems employed have been improved and updated and the current version is the BRS-6. This has a separate rocket installation that can be removed from the parachute so the parachute can be sent for re-packing without the problems of trying to ship the rocket as well. Typically the parachute requires repacking every six years and the rocket requires replacing every 12 years.

Rescues completed

The first ballistic recovery parachutes were on the market in 1982, and the first deployment was in 1983. Between then and April 2007, over 225 people were aboard 201 aircraft which deployed BRS parachutes; most of whose lives were presumably saved by those parachute deployments.[4]

Aircraft supported

BRS Models are available for:

Development

On 18 July 2008 BRS announced that its new 5000-series canopy had completed compliance testing to ASTM International standards. This new parachute system is intended to provide a recovery capability for much larger aircraft, including very light jets. Initial applications may include the Diamond D-Jet, Cirrus Vision SF50 and Lancair Evolution. FAA certification is being pursued to allow installation on certified aircraft.[6]

Cirrus Airframe Parachute System (CAPS)

NASA photo series showing the CAPS deployment in action.

The CAPS is a whole-plane ballistic parachute recovery system designed specifically for Cirrus Aircraft's line of general aviation light aircraft including the SRV, SR20 and SR22. The design became the first of its kind used as standard equipment on a certified aircraft,[7] and was adapted from the GARD system initially released for the Cessna 150.[8] As in other BRS systems, a solid-fuel rocket housed in the aft fuselage is used to pull the parachute out from its housing and deploy the canopy full within seconds. The goal of employing this system is the survival of the crew and passengers and not necessarily the prevention of damage to the airframe.

Since the landing gear and firewall are a part of the structure designed to be crushed for energy absorption during impact after parachute deployment, Cirrus originally thought that the airframe would be damaged beyond repair on ground-impact, but the first aircraft to deploy (N1223S)[9] landed in mesquite and was not badly damaged. Cirrus bought the airframe back, repaired it, and used it as a demo plane. It was eventually sold to another owner who destroyed it in a crash short of the runway.[10]

CAPS history

The idea for CAPS came from Cirrus’ founders, brothers Alan and Dale Klapmeier, after Alan survived a mid-air collision in 1985 where his plane lost almost three feet of wing including half the aileron. From this experience, the Klapmeier brothers decided to implement a device on their Cirrus models that would give the pilot and passengers a way out in the worst-case scenario.[11][12][13] The Cirrus Engineering & Design Team, led by Paul Johnston, started developing CAPS on the SR20 in Duluth, Minnesota during the mid-1990s. It was first tested in 1998 over the high desert of southern California by late Air National Guard F-16 pilot and Chief Cirrus test pilot, Scott D. Anderson.[14] Anderson completed all seven of the in-flight test deployments of CAPS, before perishing the following year in an experimental test flight with an early production SR20 that had not yet been equipped with a ballistic parachute.[15][16] The first emergency deployment of CAPS occurred in 2002 over Lewisville, Texas, and resulted in the survival of one uninjured pilot.[17]

CAPS deployments

As of 3 November 2015, the CAPS has been activated 69 times, 55 of which saw successful parachute deployment. In those successful deployments, there were 112 survivors and 1 fatality. No fatalities, unsuccessful deployments, or anomalies (with the exception of one that is still under investigation) have occurred when the parachute was deployed within the certified speed and altitude parameters. Some additional deployments have been reported by accident, as caused by ground impact or post-impact fires, and 14 of the aircraft involved in CAPS deployments have been repaired and put back into service.[18]

See also

References

  1. ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ BRS Announces 11th LSA Installation Complete: Financial News - Yahoo! Finance
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ BRS to offer parachute system for Cessna 150
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Ballistic_Recovery_Systems&oldid=671224#Cirrus_Airframe_Parachute_System_.28CAPS.29"