Classical mechanics
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Lua error in package.lua at line 80: module 'strict' not found.
In physics, classical mechanics and quantum mechanics are the two major subfields of mechanics. Classical mechanics is a mathematical description of what are called physical laws. Some of these laws describe the stationary state, or the motion, of material objects (called bodies) under the influence of a system of forces. The study of the stasis and the motion of bodies is an ancient one, making classical mechanics one of the oldest and largest subjects in science, engineering and technology. It is also widely known as Newtonian mechanics. Some authors also include unquantized electrodynamics, the description of light, magnetism, and electricity, as a branch of classical mechanics.
Classical mechanics describes the motion of macroscopic objects, from projectiles to parts of machinery, as well as astronomical objects, such as spacecraft, planets, stars, and galaxies. Within classical mechanics are fields of study that describe the behavior of solids, liquids and gases and other specific subtopics. Classical mechanics can provide extremely accurate results as long as the domain of study is restricted to large objects and the speeds involved do not approach the speed of light. When the objects being examined are sufficiently small, it becomes necessary to introduce the other major subfield of mechanics, quantum mechanics, which adjusts the laws of physics of macroscopic objects for the atomic nature of matter by using an acausal, probabilistic description of the behavior of atoms and molecules. Quantum field theory (QFT) is used for particle physics and the standard model when both quantum mechanics and classical mechanics are not descriptive.
The term classical mechanics was coined in the early 20th century to describe the system of physics begun by Isaac Newton and many contemporary 17th century natural philosophers. It's kinematics are partially built upon the earlier astronomical theories of Johannes Kepler, which in turn were based on the precise observations of Tycho Brahe and the studies of terrestrial projectile motion of Galileo. Since these aspects of physics were developed long before the emergence of quantum physics and relativity, some sources exclude relativistic theories from this category. Other modern sources do include relativistic mechanics, which in their view represents classical mechanics in its most accurate form.
The term "classical" also refers to the era of classical antiquity in European history, which can be confusing. While many discoveries of physics and mathematics made in that period are applicable today and of great use, much of that earlier science has since been superseded by more accurate models. The emergence of classical mechanics was a decisive stage in the development of modern science. Its proponents insist that the descriptions of the behavior of bodies can be placed on a more exacting basis provided by a mathematical treatment and a reliance on experiment, rather than speculation. Classical mechanics established the means of predicting, in a quantitative manner, the behavior of objects, and how to test those predictions by carefully designed experiments and measurements.
The earliest development of classical mechanics is often referred to as Newtonian mechanics, and is associated with the physical concepts employed by and the mathematical methods invented by Newton, Leibniz, and others. Later, more abstract and general methods were developed, leading to the reformulations of classical mechanics known as Lagrangian mechanics and Hamiltonian mechanics. These advances were largely made in the 18th and 19th centuries, and they extend substantially beyond Newton's work, particularly through their use of analytical mechanics.
Contents
Description of the theory
The following introduces the basic concepts of classical mechanics. For simplicity, it often models realworld objects as point particles (objects with negligible size). The motion of a point particle is characterized by a small number of parameters: its position, mass, and the forces applied to it. Each of these parameters is discussed in turn.
In reality, the kind of objects that classical mechanics can describe always have a nonzero size. (The physics of very small particles, such as the electron, is more accurately described by quantum mechanics.) Objects with nonzero size have more complicated behavior than hypothetical point particles, because of the additional degrees of freedom: a baseball can spin while it is moving, for example. However, the results for point particles can be used to study such objects by treating them as composite objects, made of a large number of collectively acting point particles. The center of mass of a composite object behaves like a point particle.
Classical mechanics uses commonsense notions of how matter and forces exist and interact. It assumes that matter and energy have definite, knowable attributes such as where an object is in space and its speed. It also assumes that objects may be directly influenced only by their immediate surroundings, known as the principle of locality.
Position and its derivatives
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The SI derived "mechanical" (that is, not electromagnetic or thermal) units with kg, m and s 

position  m 
angular position/angle  unitless (radian) 
velocity  m·s^{−1} 
angular velocity  s^{−1} 
acceleration  m·s^{−2} 
angular acceleration  s^{−2} 
jerk  m·s^{−3} 
"angular jerk"  s^{−3} 
specific energy  m^{2}·s^{−2} 
absorbed dose rate  m^{2}·s^{−3} 
moment of inertia  kg·m^{2} 
momentum  kg·m·s^{−1} 
angular momentum  kg·m^{2}·s^{−1} 
force  kg·m·s^{−2} 
torque  kg·m^{2}·s^{−2} 
energy  kg·m^{2}·s^{−2} 
power  kg·m^{2}·s^{−3} 
pressure and energy density  kg·m^{−1}·s^{−2} 
surface tension  kg·s^{−2} 
spring constant  kg·s^{−2} 
irradiance and energy flux  kg·s^{−3} 
kinematic viscosity  m^{2}·s^{−1} 
dynamic viscosity  kg·m^{−1}·s^{−1} 
density (mass density)  kg·m^{−3} 
density (weight density)  kg·m^{−2}·s^{−2} 
number density  m^{−3} 
action  kg·m^{2}·s^{−1} 
The position of a point particle is defined with respect to an arbitrary fixed reference point in space called the origin O, in space, to which is attached a coordinate system. A simple coordinate system might describe the position of a point P by means of an arrow designated as r (in classical mechanics called a vector), pointing from the origin O to the point particle. In general, the point particle need not be stationary relative to O, such that r is a function of t, the time. In preEinstein relativity (known as Galilean relativity), time is considered an absolute, i.e., the time interval that is observed to elapse between any given pair of events is the same for all observers.^{[1]} In addition to relying on absolute time, classical mechanics assumes Euclidean geometry for the structure of space.^{[2]}
Velocity and speed
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The velocity, or the rate of change of position with time, is defined as the derivative of the position with respect to time:
 .
In classical mechanics, velocities are directly additive and subtractive. For example, if one car traveling east at 60 km/h passes another car traveling east at 50 km/h, then from the perspective of the slower car, the faster car is traveling east at 60 − 50 = 10 km/h. Whereas, from the perspective of the faster car, the slower car is moving 10 km/h to the west. Velocities are directly additive as vector quantities; they must be dealt with using vector analysis.
Mathematically, if the velocity of the first object in the previous discussion is denoted by the vector u = ud and the velocity of the second object by the vector v = ve, where u is the speed of the first object, v is the speed of the second object, and d and e are unit vectors in the directions of motion of each particle respectively, then the velocity of the first object as seen by the second object is
Similarly,
When both objects are moving in the same direction, this equation can be simplified to
Or, by ignoring direction, the difference can be given in terms of speed only:
Acceleration
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The acceleration, or rate of change of velocity, is the derivative of the velocity with respect to time (the second derivative of the position with respect to time):
Acceleration represents the velocity's change over time: either of the velocity's magnitude or direction, or both. If only the magnitude v of the velocity decreases, this is sometimes referred to as deceleration, but generally any change in the velocity with time, including deceleration, is simply referred to as acceleration.
Frames of reference
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
While the position, velocity and acceleration of a particle can be described with respect to any observer in any state of motion, classical mechanics assumes the existence of a special family of reference frames in terms of which the mechanical laws of nature take a comparatively simple form. These special reference frames are called inertial frames. An inertial frame is one that when an object that has no force interactions (an idealized situation) is viewed from that frame, it appears either to be at rest or in a state of uniform motion in a straight line. This is the fundamental definition of an inertial frame. They are characterized by the requirement that all forces entering the observer's physical laws^{[clarification needed]} originate from identifiable sources caused by fields, such as electrostatic field (caused by static electrical charges), electromagnetic field (caused by moving charges), gravitational field (caused by mass), and so forth. A noninertial reference frame is one that is accelerating with respect to an inertial frame, and in such a noninertial frame a particle appears to be acted on by other forces not explained by existing fields. Such other forces are called variously fictitious forces, inertia forces, pseudoforces. Hence, there appears to be other forces that enter the equations of motion solely as a result of the observed accelerations. A key concept of inertial frames is the method for identifying them. For practical purposes, reference frames that are unaccelerated with respect to the distant stars (an extremely distant point) are regarded as good approximations to inertial frames.
Consider two reference frames S and S'. For observers in each of the reference frames an event has spacetime coordinates of (x,y,z,t) in frame S and (x',y',z',t') in frame S'. Assuming time is measured the same in all reference frames, and if we require x = x' when t = 0, then the relation between the spacetime coordinates of the same event observed from the reference frames S' and S, which are moving at a relative velocity of u in the x direction is:
 x' = x − u·t
 y' = y
 z' = z
 t' = t.
This set of formulas defines a group transformation known as the Galilean transformation (informally, the Galilean transform). This group is a limiting case of the Poincaré group used in special relativity. The limiting case applies when the velocity u is very small compared to c, the speed of light.
The transformations have the following consequences:
 v′ = v − u (the velocity v′ of a particle from the perspective of S′ is slower by u than its velocity v from the perspective of S)
 a′ = a (the acceleration of a particle is the same in any inertial reference frame)
 F′ = F (the force on a particle is the same in any inertial reference frame)
 the speed of light is not a constant in classical mechanics, nor does the special position given to the speed of light in relativistic mechanics have a counterpart in classical mechanics.
For some problems, it is convenient to use rotating coordinates (reference frames). Thereby one can either keep a mapping to a convenient inertial frame, or introduce additionally a fictitious centrifugal force and Coriolis force.
Forces; Newton's second law
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Newton was the first to mathematically express the relationship between force and momentum. Some physicists interpret Newton's second law of motion as a definition of force and mass, while others consider it a fundamental postulate, a law of nature.^{[citation needed]} Either interpretation has the same mathematical consequences, historically known as "Newton's Second Law":
The quantity mv is called the (canonical) momentum. The net force on a particle is thus equal to the rate of change of the momentum of the particle with time. Since the definition of acceleration is a = dv/dt, the second law can be written in the simplified and more familiar form:
So long as the force acting on a particle is known, Newton's second law is sufficient to describe the motion of a particle. Once independent relations for each force acting on a particle are available, they can be substituted into Newton's second law to obtain an ordinary differential equation, which is called the equation of motion.
As an example, assume that friction is the only force acting on the particle, and that it may be modeled as a function of the velocity of the particle, for example:
where λ is a positive constant, the negative sign states that the force is opposite the sense of the velocity. Then the equation of motion is
This can be integrated to obtain
where v_{0} is the initial velocity. This means that the velocity of this particle decays exponentially to zero as time progresses. In this case, an equivalent viewpoint is that the kinetic energy of the particle is absorbed by friction (which converts it to heat energy in accordance with the conservation of energy), and the particle is slowing down. This expression can be further integrated to obtain the position r of the particle as a function of time.
Important forces include the gravitational force and the Lorentz force for electromagnetism. In addition, Newton's third law can sometimes be used to deduce the forces acting on a particle: if it is known that particle A exerts a force F on another particle B, it follows that B must exert an equal and opposite reaction force, −F, on A. The strong form of Newton's third law requires that F and −F act along the line connecting A and B, while the weak form does not. Illustrations of the weak form of Newton's third law are often found for magnetic forces.^{[clarification needed]}
Work and energy
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
If a constant force F is applied to a particle that makes a displacement Δr,^{[note 1]} the work done by the force is defined as the scalar product of the force and displacement vectors:
More generally, if the force varies as a function of position as the particle moves from r_{1} to r_{2} along a path C, the work done on the particle is given by the line integral
If the work done in moving the particle from r_{1} to r_{2} is the same no matter what path is taken, the force is said to be conservative. Gravity is a conservative force, as is the force due to an idealized spring, as given by Hooke's law. The force due to friction is nonconservative.
The kinetic energy E_{k} of a particle of mass m travelling at speed v is given by
For extended objects composed of many particles, the kinetic energy of the composite body is the sum of the kinetic energies of the particles.
The work–energy theorem states that for a particle of constant mass m, the total work W done on the particle as it moves from position r_{1} to r_{2} is equal to the change in kinetic energy E_{k} of the particle:
Conservative forces can be expressed as the gradient of a scalar function, known as the potential energy and denoted E_{p}:
If all the forces acting on a particle are conservative, and E_{p} is the total potential energy (which is defined as a work of involved forces to rearrange mutual positions of bodies), obtained by summing the potential energies corresponding to each force
The decrease in the potential energy is equal to the increase in the kinetic energy
This result is known as conservation of energy and states that the total energy,
is constant in time. It is often useful, because many commonly encountered forces are conservative.
Beyond Newton's laws
Classical mechanics also describes the more complex motions of extended nonpointlike objects. Euler's laws provide extensions to Newton's laws in this area. The concepts of angular momentum rely on the same calculus used to describe onedimensional motion. The rocket equation extends the notion of rate of change of an object's momentum to include the effects of an object "losing mass".
There are two important alternative formulations of classical mechanics: Lagrangian mechanics and Hamiltonian mechanics. These, and other modern formulations, usually bypass the concept of "force", instead referring to other physical quantities, such as energy, speed and momentum, for describing mechanical systems in generalized coordinates.
The expressions given above for momentum and kinetic energy are only valid when there is no significant electromagnetic contribution. In electromagnetism, Newton's second law for currentcarrying wires breaks down unless one includes the electromagnetic field contribution to the momentum of the system as expressed by the Poynting vector divided by c^{2}, where c is the speed of light in free space.
Limits of validity
Many branches of classical mechanics are simplifications or approximations of more accurate forms; two of the most accurate being general relativity and relativistic statistical mechanics. Geometric optics is an approximation to the quantum theory of light, and does not have a superior "classical" form.
When both quantum mechanics and classical mechanics cannot apply, such as at the quantum level with many degrees of freedom, quantum field theory (QFT) is of use. QFT deals with small distances and large speeds with many degrees of freedom as well as the possibility of any change in the number of particles throughout the interaction. When treating large degrees of freedom at the macroscopic level, statistical mechanics becomes useful. Statistical mechanics describes the behavior of large (but countable) numbers of particles and their interactions as a whole at the macroscopic level. Statistical mechanics is mainly used in thermodynamics for systems that lie outside the bounds of the assumptions of classical thermodynamics. In the case of high velocity objects approaching the speed of light, classical mechanics is enhanced by special relativity. General relativity unifies special relativity with Newton's law of universal gravitation, allowing physicists to handle gravitation at a deeper level.
The Newtonian approximation to special relativity
In special relativity, the momentum of a particle is given by
where m is the particle's rest mass, v its velocity, and c is the speed of light.
If v is very small compared to c, v^{2}/c^{2} is approximately zero, and so
Thus the Newtonian equation p = mv is an approximation of the relativistic equation for bodies moving with low speeds compared to the speed of light.
For example, the relativistic cyclotron frequency of a cyclotron, gyrotron, or high voltage magnetron is given by
where f_{c} is the classical frequency of an electron (or other charged particle) with kinetic energy T and (rest) mass m_{0} circling in a magnetic field. The (rest) mass of an electron is 511 keV. So the frequency correction is 1% for a magnetic vacuum tube with a 5.11 kV direct current accelerating voltage.
The classical approximation to quantum mechanics
The ray approximation of classical mechanics breaks down when the de Broglie wavelength is not much smaller than other dimensions of the system. For nonrelativistic particles, this wavelength is
where h is Planck's constant and p is the momentum.
Again, this happens with electrons before it happens with heavier particles. For example, the electrons used by Clinton Davisson and Lester Germer in 1927, accelerated by 54 volts, had a wavelength of 0.167 nm, which was long enough to exhibit a single diffraction side lobe when reflecting from the face of a nickel crystal with atomic spacing of 0.215 nm. With a larger vacuum chamber, it would seem relatively easy to increase the angular resolution from around a radian to a milliradian and see quantum diffraction from the periodic patterns of integrated circuit computer memory.
More practical examples of the failure of classical mechanics on an engineering scale are conduction by quantum tunneling in tunnel diodes and very narrow transistor gates in integrated circuits.
Classical mechanics is the same extreme high frequency approximation as geometric optics. It is more often accurate because it describes particles and bodies with rest mass. These have more momentum and therefore shorter De Broglie wavelengths than massless particles, such as light, with the same kinetic energies.
History
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Some Greek philosophers of antiquity, among them Aristotle, founder of Aristotelian physics, may have been the first to maintain the idea that "everything happens for a reason" and that theoretical principles can assist in the understanding of nature. While to a modern reader, many of these preserved ideas come forth as eminently reasonable, there is a conspicuous lack of both mathematical theory and controlled experiment, as we know it. These latter became decisive factors in forming modern science, and their early application came to be known as classical mechanics.
In his Elementa super demonstrationem ponderum, medieval mathematician Jordanus de Nemore introduced the concept of "positional gravity" and the use of component forces.
The first published causal explanation of the motions of planets was Johannes Kepler's Astronomia nova published in 1609. He concluded, based on Tycho Brahe's observations of the orbit of Mars, that the orbits were ellipses. This break with ancient thought was happening around the same time that Galileo was proposing abstract mathematical laws for the motion of objects. He may (or may not) have performed the famous experiment of dropping two cannonballs of different weights from the tower of Pisa, showing that they both hit the ground at the same time. The reality of this experiment is disputed, but, more importantly, he did carry out quantitative experiments by rolling balls on an inclined plane. His theory of accelerated motion derived from the results of such experiments, and forms a cornerstone of classical mechanics.
Newton founded his principles of natural philosophy on three proposed laws of motion: the law of inertia, his second law of acceleration (mentioned above), and the law of action and reaction; and hence laid the foundations for classical mechanics. Both Newton's second and third laws were given the proper scientific and mathematical treatment in Newton's Philosophiæ Naturalis Principia Mathematica, which distinguishes them from earlier attempts at explaining similar phenomena, which were either incomplete, incorrect, or given little accurate mathematical expression. Newton also enunciated the principles of conservation of momentum and angular momentum. In mechanics, Newton was also the first to provide the first correct scientific and mathematical formulation of gravity in Newton's law of universal gravitation. The combination of Newton's laws of motion and gravitation provide the fullest and most accurate description of classical mechanics. He demonstrated that these laws apply to everyday objects as well as to celestial objects. In particular, he obtained a theoretical explanation of Kepler's laws of motion of the planets.
Newton had previously invented the calculus, of mathematics, and used it to perform the mathematical calculations. For acceptability, his book, the Principia, was formulated entirely in terms of the longestablished geometric methods, which were soon eclipsed by his calculus. However, it was Leibniz who developed the notation of the derivative and integral preferred^{[3]} today.
Newton, and most of his contemporaries, with the notable exception of Huygens, worked on the assumption that classical mechanics would be able to explain all phenomena, including light, in the form of geometric optics. Even when discovering the socalled Newton's rings (a wave interference phenomenon) he maintained his own corpuscular theory of light.
After Newton, classical mechanics became a principal field of study in mathematics as well as physics. Several reformulations progressively allowed finding solutions to a far greater number of problems. The first notable reformulation was in 1788 by Joseph Louis Lagrange. Lagrangian mechanics was in turn reformulated in 1833 by William Rowan Hamilton.
Some difficulties were discovered in the late 19th century that could only be resolved by more modern physics. Some of these difficulties related to compatibility with electromagnetic theory, and the famous Michelson–Morley experiment. The resolution of these problems led to the special theory of relativity, often included in the term classical mechanics.
A second set of difficulties were related to thermodynamics. When combined with thermodynamics, classical mechanics leads to the Gibbs paradox of classical statistical mechanics, in which entropy is not a welldefined quantity. Blackbody radiation was not explained without the introduction of quanta. As experiments reached the atomic level, classical mechanics failed to explain, even approximately, such basic things as the energy levels and sizes of atoms and the photoelectric effect. The effort at resolving these problems led to the development of quantum mechanics.
Since the end of the 20th century, the place of classical mechanics in physics has been no longer that of an independent theory. Instead, classical mechanics is now considered an approximate theory to the more general quantum mechanics. Emphasis has shifted to understanding the fundamental forces of nature as in the Standard model and its more modern extensions into a unified theory of everything.^{[4]} Classical mechanics is a theory useful for the study of the motion of nonquantum mechanical, lowenergy particles in weak gravitational fields. In the 21st century classical mechanics has been extended into the complex domain and complex classical mechanics exhibits behaviors very similar to quantum mechanics.^{[5]}
Branches
Classical mechanics was traditionally divided into three main branches:
 Statics, the study of equilibrium and its relation to forces
 Dynamics, the study of motion and its relation to forces
 Kinematics, dealing with the implications of observed motions without regard for circumstances causing them
Another division is based on the choice of mathematical formalism:
Alternatively, a division can be made by region of application:
 Celestial mechanics, relating to stars, planets and other celestial bodies
 Continuum mechanics, for materials modelled as a continuum, e.g., solids and fluids (i.e., liquids and gases).
 Relativistic mechanics (i.e. including the special and general theories of relativity), for bodies whose speed is close to the speed of light.
 Statistical mechanics, which provides a framework for relating the microscopic properties of individual atoms and molecules to the macroscopic or bulk thermodynamic properties of materials.
See also
<templatestyles src="Div col/styles.css"/>
Notes
 ↑ The displacement Δr is the difference of the particle's initial and final positions: Δr = r_{final} − r_{initial}.
References
 ↑ Lua error in package.lua at line 80: module 'strict' not found. Extract of page 30
 ↑ MIT physics 8.01 lecture notes (page 12) (PDF)
 ↑ Jesseph, Douglas M. (1998). "Leibniz on the Foundations of the Calculus: The Question of the Reality of Infinitesimal Magnitudes". Perspectives on Science. 6.1&2: 6–40. Retrieved 31 December 2011.
 ↑ Page 210 of the Feynman Lectures on Physics says "For already in classical mechanics there was indeterminability from a practical point of view." The past tense here implies that classical physics is no longer fundamental.
 ↑ Complex Elliptic Pendulum, Carl M. Bender, Daniel W. Hook, Karta Kooner in Asymptotics in Dynamics, Geometry and PDEs; Generalized Borel Summation vol. I
Further reading
 Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.*Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.
 Lua error in package.lua at line 80: module 'strict' not found.
External links
Wikimedia Commons has media related to Classical mechanics. 
Wikiquote has quotations related to: Classical mechanics 
 Crowell, Benjamin. Newtonian Physics (an introductory text, uses algebra with optional sections involving calculus)
 Fitzpatrick, Richard. Classical Mechanics (uses calculus)
 Hoiland, Paul (2004). Preferred Frames of Reference & Relativity
 Horbatsch, Marko, "Classical Mechanics Course Notes".
 Rosu, Haret C., "Classical Mechanics". Physics Education. 1999. [arxiv.org : physics/9909035]
 Shapiro, Joel A. (2003). Classical Mechanics
 Sussman, Gerald Jay & Wisdom, Jack & Mayer,Meinhard E. (2001). Structure and Interpretation of Classical Mechanics
 Tong, David. Classical Dynamics (Cambridge lecture notes on Lagrangian and Hamiltonian formalism)
 Kinematic Models for Design Digital Library (KMODDL)
Movies and photos of hundreds of working mechanicalsystems models at Cornell University. Also includes an ebook library of classic texts on mechanical design and engineering.  MIT OpenCourseWare 8.01: Classical Mechanics Free videos of actual course lectures with links to lecture notes, assignments and exams.
 Alejandro A. Torassa, On Classical Mechanics