Colt Walker

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Colt Walker
300px
Type Revolver
Place of origin United States
Service history
In service 1847–1848 then evolved into subsequent designs
Used by U.S.A.
Production history
Designer Samuel Colt, Captain Samuel Walker
Designed 1847
Manufacturer Eli Whitney, Jr. at Whitneyville, Connecticut for Saml. Colt, New York City
Produced 1847
Number built 1,100
Variants Colt Whitneyville Hartford Dragoon Revolver, quantity about 240
Specifications
Weight 4.5 lb (2.0 kg)
Length 15.5 in (390 mm)

Caliber .44 ball, revolver
.454 in (11.5 mm), dia.
Action single-action
Muzzle velocity 1,000 to 1,200 feet per second (300–370 m/s)
Effective firing range 100 yards (91 m)
Feed system six-round cylinder
Sights blade front sight, hammer notch rear sight

The Colt Walker, sometimes known as the Walker Colt, was a single-action revolver with a revolving cylinder holding six charges of black powder behind six bullets (typically .44 caliber lead balls). It was designed in 1846 as a collaboration between Captain Samuel Hamilton Walker and American firearms inventor Samuel Colt.

History

The 1847 Colt Walker was the largest and most powerful black powder repeating handgun ever made. It was created in the mid-1840s in a collaboration between Texas Ranger Captain Samuel Hamilton Walker (1817–47) and American firearms inventor Samuel Colt (1814–62), building upon the earlier Colt Paterson design. Walker wanted a handgun that was extremely powerful at close range.[1]

Samuel Walker carried two of his namesake revolvers in the Mexican–American War.[2] He was killed in battle the same year his famous handgun was invented, 1847, shortly after he had received them. Only 1100 of these guns were originally made, which makes originals extremely rare and expensive to acquire. On October 9, 2008, one specimen that had been handed down from a Mexican War veteran sold at auction for US$920,000.[3]

The Republic of Texas had been the major purchaser of the early Paterson Holster Pistol (No. 5 model), a five shot cal .36 revolver, and Samuel Walker became familiar with it during his service as a Texas Ranger. In 1847, Walker was engaged in the Mexican-American War as a captain in the United States Mounted Rifles. He approached Colt, requesting a large revolver to replace the single-shot Aston Johnson holster pistols then in use. The desired .44-.45 caliber revolver would be carried in saddle mounted holsters and would be large enough to dispatch horses as well as enemy soldiers. The Colt Walker was used in the Mexican-American War and on the Texas frontier.[1]

Medical officer John "Rip" Ford took a special interest in the Walkers when they arrived at Veracruz. He obtained two examples for himself and is the primary source for information about their performance during the war and afterward. His observation that the revolver would carry as far and strike with the same or greater force than the .54 caliber Mississippi Rifle seems to have been based on a single observation of a Mexican soldier hit at a distance of well over one hundred yards. The Walker, unlike most succeeding martial pistols and revolvers, was a practical weapon out to about 100 yards.[1]

Specifications

Samuel Hamilton Walker (1817–1847)

The Colt Walker holds a powder charge of 60 grains (3.9 g) in each chamber, more than twice what a typical black powder revolver holds. It weighs Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). unloaded, has a 9-inch (230 mm) barrel, and fires a .44 caliber (0.454 in (11.5 mm) diameter) conical and round ball. The initial contract called for 1,000 of the revolvers and accoutrements. Colt commissioned Eli Whitney Junior to fill the contract and produced an extra 100 revolvers for private sales and promotional gifts.[4]

Colt commissioned New York engraver Waterman Ormsby to etch a scene on the cylinder that was based on Walker's description of the 1844 battle.[5]

Problems

In addition to its large size and weight, problems with the Walker included ruptured cylinders after firing. This has been attributed to primitive metallurgy, soldiers allowing powder to spill across the mouths of the chambers, and even loading the original conical bullets backwards into the chambers. Under 300 of the original 1,000 were returned for repair due to a ruptured cylinder. Lard was loaded into the mouths of the cylinders on top of each bullet after loading to prevent the spark from igniting all chambers at once, a practice which continues to this day among black-powder revolver shooters, and although each chamber held 60 grains of Powder, Colt recommended no more than 50 grains in each.[6]

The Walker had an inadequate loading lever catch that often allowed the loading lever to drop during recoil, preventing fast follow-up shots. Period-correct fixes for this often included placing a rawhide loop around both the barrel and loading lever, to prevent the loading lever from dropping under recoil and locking the action.[7]

Legacy

The Whitneyville-Hartford Dragoon is known as the first transitional model from the Walker to the Dragoon series, as it was largely built from leftover Walker parts. Subsequent contracts beginning in 1848 followed, for what is today known among collectors as the First, Second and Third Dragoon Models that were all based on the Colt Walker, enabling a rapid evolution of the basic revolver design. These improvements included Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). barrels, shorter chambers, typically loaded only to 50 grains instead of 60 grains, thereby reducing the occurrence of ruptured cylinders, and the addition of a positive catch at the end of the loading lever to prevent the dropping of the loading lever under recoil.[1]

The Colt Walker was quite powerful, with modern replicas firing modern FFFg black powder producing energy levels in excess of 500 foot-pounds (680 J) muzzle-energy with both picket bullets and 0.454-inch-diameter (11.5 mm), 141-grain (9.1 g) round ball bullets. The black powder Colt Walker is often regarded as the most powerful commercially manufactured repeating handgun from 1847 until the introduction of the .357 Magnum in 1935, having a muzzle energy nearly exactly the same as a 4-inch-barreled (10 cm) handgun firing a .357 Magnum.[8] The Colt Walker has long maintained a unique position and mystique among handgun users, and its name is often used as a common expression of any overly large generic handgun example.

In the 1968 book, True Grit, 14-year-old Mattie carries a Colt Dragoon. However, possibly due to the Walker's bigger size, a cartridge-converted Colt Walker was used as Mattie's weapon in the 1969 film based on the book. In the 2010 remake of the film by the Coen Brothers, she carries a Dragoon, as originally described in the book

Modern replicas have been offered by the Colt Blackpowder shop, Cimarron Firearms, Armi San Marco, and Uberti Firearms.[9]

References

  1. 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. The Handbook of Texas Online The Handbook of Texas Online entry for Samuel Hamilton Walker. Accessed on 2007-05-12.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.

External links