Common Berthing Mechanism

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
File:Common Berthing Mechanism.png
Common berthing mechanism schematic diagram
File:HTV-1 unberth for release02.jpg
HTV being unberthed from an active CBM

The Common Berthing Mechanism (CBM) is a berthing mechanism used to connect all non-Russian pressurized modules of the International Space Station. It was developed by Boeing at the Marshall Space Flight Center (MSFC) in Huntsville, Alabama while under contract to the National Aeronautics and Space Administration (NASA).[1]

A CBM consists of two components: the active common berthing mechanism (ACBM) and the passive common berthing mechanism (PCBM).[1] Once connected, the two sides of the CBM form a pressure tight seal. The CBM also features a hatch, which can be opened to reveal a 50 inch (127 cm) diameter passage for crew/cargo transfer. Since this passage is large enough to allow International Standard Payload Racks to fit, payloads can be pre-configured in racks and transported to the station aboard the Multi-Purpose Logistics Modules, which use CBM ports. Once the hatches have been opened, electrical, data, and fluid lines can be manually connected through the CBM vestibule by the crew.

The first modules in space using the CBM were Unity and the Pressurized Mating Adapters PMA-1 and PMA-2, with all three being launched attached together aboard Endeavour. The first berthing in space using the CBM was the connecting of the Z1 truss to Unity on the International Space Station.[1]

The CBM is used as a berthing mechanism for the unmanned Japanese H-II Transfer Vehicle (HTV), SpaceX Dragon, and Orbital Sciences' Cygnus spacecraft. These spacecraft feature a PCBM, and are berthed to one of the station's open ACBMs using the station's robot arm.[2]

Each CBM compatible module that connects to previously launched modules requires a PCBM to connect to an ACBM.[1] The three ISS connecting nodes feature four radial ACBM ports. Unity features two ACBM on the axial side, while Harmony and Tranquility feature a PCBM on one axial side and an ACBM on the other axial side.[3][4] The Destiny' laboratory and the Japanese Pressurised Module both feature one PCBM and one ACBM.[5][6]

Gallery

See also

References

  1. 1.0 1.1 1.2 1.3 The common berthing mechanism (CBM) for International Space Station PDF (923 KiB)
  2. [1]
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.

 This article incorporates public domain material from websites or documents of the National Aeronautics and Space Administration.