Confederate Revolving Cannon
| Confederate Revolving Cannon | |
|---|---|
Confederate Revolving Cannon
|
|
| Place of origin |  Confederate States |
| Service history | |
| In service | 1861-1865 |
| Used by | Confederate States of America |
| Wars | American Civil War |
| Production history | |
| Designer | Henry Clay Pate |
The Confederate Revolving Cannon was a weapon developed and used during the U.S. Civil War. The weapon was designed somewhat like a revolver pistol, scaled up to the size of a cannon.
History
Henry Clay Pate was a former attorney who, during the U.S. Civil War, organized a mounted company that was called Pate's Rangers or the Petersburg Rangers. The innovative Pate designed the revolving cannon, which he had cast at the Petersburg foundry in Petersburg, Va. This cannon was then made available to Pate's unit.[1]
The cannon saw use in the siege of Petersburg, Va. It was captured by Union troops at Danville, Va, on April 27, 1865. While innovative, the weapon did not play a significant role on the battlefield. After its capture, the cannon was sent to the Ordnance Laboratory, United States Military Academy, West Point, New York.
Design and Features
The revolving cannon was designed with the goal of increasing the fire rate of a cannon. The design was somewhat similar to that of a revolving pistol of the time, consisting of a cylinder which contained the rounds to be fired, with the rotation of the cylinder used to bring the round into position at the breech of a single barrel. The barrel had a two-inch bore, and the cylinder held five rounds.
The cylinders of the revolving cannon were fired using percussion caps. The cap was struck by a large spring-actuated striker.
The cannon employed a screw mechanism which would push the cylinder forward when it was in position. This reduced the gap between the cylinder and the barrel, which significantly reduced gas leakage during firing.
A lever attached to a ratcheting mechanism was used to rotate the cylinder. A spring-loaded dog would slip into recesses in the cylinder, holding it in the correct position for firing.[2]
