Cygnus CRS OA-9E

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Cygnus CRS OA-9E
Mission type ISS resupply
Operator NASA
Spacecraft properties
Spacecraft type Enhanced Cygnus[1][2]
Manufacturer Orbital ATK
Thales Alenia Space
Start of mission
Launch date 2017[3]
Rocket Antares 230[2][4][5]
Launch site MARS LP-0A
Contractor Orbital ATK
Orbital parameters
Reference system Geocentric
Regime Low Earth
Inclination 51.6 degrees
Epoch Planned
Berthing at ISS
Berthing port Harmony nadir or Unity nadir
----
Commercial Resupply Services
← Cygnus CRS OA-8E Cygnus CRS OA-10E

Cygnus CRS OA-9E, also known as Orbital Sciences CRS Flight 9E, is the tenth planned flight of the Orbital ATK unmanned resupply spacecraft Cygnus and its ninth flight to the International Space Station under the Commercial Resupply Services contract with NASA.[6][7] Orbital and NASA jointly developed a new space transportation system to provide commercial cargo resupply services to the International Space Station (ISS). Under the Commercial Orbital Transportation System (COTS) program, then Orbital Sciences designed and built Antares, a medium-class launch vehicle; Cygnus, an advanced maneuvering spacecraft, and a Pressurized Cargo Module which is provided by Orbital's industrial partner Thales Alenia Space.[8]

History

The COTS demonstration mission was successfully conducted in September 2013, and Orbital commenced operational ISS cargo missions under the Commercial Resupply Service (CRS) program with two missions in 2014. Regrettably, the third operational mission, Orb CRS-3, resulted was not successful due to spectacular Antares failure during launch. The company decided to discontinue the Antares 100 series and accelerate the introduction of a new propulsion. The Antares system will be upgraded with newly built RD-181 first-stage engines to provide greater payload performance and increased reliability.[4]

In the meantime, the company has contracted with United Launch Alliance for an Atlas V launch of CRS OA-4 in late 2015 from Cape Canaveral, FL, with a second Atlas V Cygnus launch in 2016.[4][5] The company has planned Cygnus missions for the first (CRS OA-5), second (CRS OA-6) and fourth quarters (CRS OA-7) of 2016. Two of which will fly on the new Antares 230 and one on the aforementioned second Atlas V. These three missions will enable Orbital ATK to cover their initial CRS contracted payload obligation.[5][9] This particular mission, is known as OA-9E, is part of an extension program that will enable NASA to cover the ISS resupply needs until the Commercial Resupply Services 2 contract enters in effect, and thus the E indicates that it actually is an extension above the originally contracted payload transport.[9]

Production and integration of Cygnus spacecraft is performed in Dulles, VA. The Cygnus service module is mated with the pressurized cargo module at the launch site, and mission operations are conducted from control centers in Dulles and Houston.[8]

Spacecraft

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

This is the ninth of ten flights by Orbital ATK under the Commercial Resupply Services contract with NASA, and its considered an extension over the originally contracted flights. This will be the sixth flight of the Enhanced sized Cygnus PCM.[5] The mission is expected to launch during 2017.[3][10]

Manifest

Total weight of cargo: up to 3,200 kg (7,100 lb).[2]

  • Crew supplies: 0 pounds (0 kg)
    • Crew care packages
    • Crew provisions
    • Food
  • Hardware: 0 pounds (0 kg)
  • Science and research: 0 pounds (0 kg)
    • CubeSat
    • Human Research Program resupply
  • Computer supplies: 0 pounds (0 kg)
  • Spacewalk tools: 0 pounds (0 kg)

Other ORB projects

After OA-7 planned for December 30, 2016 and OA-8E for June 12, 2017, NASA has tentatively scheduled this OA-9E flight later in 2017 and OA-10E in 2018. The schedules in early 2017 are dynamic, due to the first manned commercial flights (SpaceX, Boeing) to ISS.[7][11]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 5.3 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.