Deeside Railway

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

Deeside Railway
Locale Scotland
Dates of operation 1853 – 1967
Track gauge 1,435 mm (4 ft 8 12 in)
Great North of Scotland Railway
to Inverness
Aberdeen Joint
Great North of Scotland Railway
to Perth
Holburn Street
Ruthrieston
Pitfodels
Cults
West Cults
Bieldside
Murtle
Milltimber
Culter
Drum
Park
Mills of Drum
Crathes
Milton of Crathes
Banchory
Dee Street Halt
Glassel
Torphins
Lumphanan
Dess
Aboyne
Dinnet
Cambus O'May
Ballater

The Deeside Railway was a passenger and goods railway between Aberdeen and Ballater in Aberdeenshire, Scotland. Opening in 1853 to Banchory, an extension reached Aboyne in 1859. A separate company, the Aboyne & Braemar Railway, built an extension to Ballater and this opened in 1866. By 1855 there were five services a day over the Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). long line, taking between 1 hour 50 minutes and ​2 12 hours. The line was used by the Royal Train for travel to and from Balmoral Castle from 1853 and a special 'Messenger Train' ran daily when the Royal Family was in residence.

The railways were absorbed by the Great North of Scotland Railway on 1 August 1875 for the Deeside Railway and 31 January 1876 for the Aboyne & Braemar.[1] The line became part of the London and North Eastern Railway in 1923, and part of British Rail when nationalised in 1948. The line was closed, to Ballater on 18 July 1966 and to Culter on 2 January 1967.

Construction

Deeside line timetable - summer 1963

A railway to serve Deeside was first suggested in 1845. A 16-mile (26 km) long line to Banchory was estimated to cost £95,000, or £220,000 to reach Aboyne, a distance of 30 miles (48 km). This was authorised on 16 July 1846, but it was decided to wait for the Aberdeen Railway to first open. Shareholders wanted their money back when the railway mania bubble burst, but it survived because the Aberdeen Railway bought a large number of shares.[2] Interest was restored after Prince Albert purchased Balmoral Castle, to which the Royal Family made their first visit in 1848, and the Aberdeen Railway was able to sell their shares. Investors were still hard to find, but by limiting the railway to a line between Ferryhill, in Aberdeen, and Banchory the Deeside Railway was able to apply to Parliament for permission in 1852. Permission was granted, and the railway opened on 7 September 1853.[3]

A special train with 15 carriages travelled from Aberdeen to Banchory, and public services began the next day. There were three trains a day, taking about an hour to travel the Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).. First class accommodation was available for ​1 12d a mile, reduced to 1 d a mile for third class. Initially the service terminated in Aberdeen at Ferryhill station, but this was extended to Guild Street when that opened in 1854, the Deeside Railway paying £700 for the first three years and then £1000 a year for the running rights. Initially the Aberdeen Railway operated the services, but only made one locomotive available, so the Deeside decided to buy its own rolling stock, and this was in service by summer 1854.[4]

A new company, the Aboyne Extension, was formed to reach Aboyne, and the Deeside agreed to operate services. Instead of building two bridges across the Dee, as had been proposed on 1846, the railway instead took a cheaper but 2-mile (3.2 km) longer route through Lumphanan. The railway was authorised on 27 July 1857, and services began on 2 December 1859.[5] The Aboyne & Braemar Railway was formed to build a line from Aboyne the 28 miles (45 km) to Braemar. This would follow the Dee, and to cross it 2 miles (3.2 km) from its terminus. However, this was modified during the parliamentary proceedings to terminate at Bridge of Gairn with the passenger terminus Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). short at Ballater. This Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). route was approved on 5 July 1865, and opened to Ballater on 17 October 1866. Some work was done on the line to Bridge of Gairn, but remained unfinished.[6] By 1855 there five services a day over the Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). long line, taking between 1 hour 50 minutes and ​2 12 hours.[7]

Royal services

File:Ballater Station - reproduction of a Victorian railway saloon carriage - geograph.org.uk - 718517.jpg
Reproduction of a royal carriage used by Queen Victoria at Ballater railway station

On 10 October 1853, the Duchess of Kent, Queen Victoria's mother, caught a special train from Banchory to Ferryhill. This left just after 1 pm and took 16 minutes to reach Ferryhill. The Queen and Albert followed three days later. As the line was extended up Deeside, closer to Balmoral, the terminus became the royal station. On 20 and 24 September 1866 the Prince and Princess of Wales,[lower-alpha 1] used Ballater station nearly a month before public services reached the station.[8]

The royal trains, which did not enter Aberdeen station but reversed at Ferryhill, took about 75 minutes to travel the Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). to Ballater; the Queen disliked high speed. The line was cleared fifteen minutes before the train was due, the facing points and level crossing gates were locked and stations closed. At first Victoria visited once a year, this becoming twice a year after Albert died in 1861. The number of visits returned to one a year after Edward VII became King in 1901 and the train became faster, although and a slower schedule was later used for George V.[9]

From 8 October 1865 a daily special 'Messenger Train' ran when the Royal Family was at Balmoral.[10] This left Aberdeen at 4 am, connecting with a service from London that had left the previous morning, and returned at 2:15 pm to connect with the night train travelling south. First class accommodation was available on these trains; accompanying servants were charged third class fares. The last Messenger Train ran in 1938, subsequently couriers used a motor car from Perth.[11]

Great North of Scotland Railway

In the late 1850s and early 1860s the Great North of Scotland Railway (GNoSR) and the Scottish North Eastern Railway (SNER) were in conflict over the building of a joint station in Aberdeen. Frustrated with lack of progress, the Scottish North Eastern proposed a new line from the Deeside Railway to join the GNoSR at Kintore. Whilst in discussions with the SNER, a lease on the Deeside Railway was offered to the GNoSR, who rapidly accepted. The Deeside board accepted the lease by a majority vote on 13 May 1862, and it was approved by Parliament on 30 July 1866. The Aboyne & Braemar remained independent, although services were operated by the GNoSR.[12]

Services

When the battery multiple unit was introduced, services were doubled to six trains a day from 21 April 1958,[13] and Sunday service reinstated.[14] The line was chosen for testing the unit because the stations were well spaced and the 1 in 70 ruling gradients would require substantial discharge rates.[15]

See also

Notes and references

Notes

  1. The Prince of Wales was Albert Edward, who became Edward VII in 1901. The Princess (his wife) was Alexandra of Denmark

References

  1. Vallance 1991, p. 81.
  2. Vallance 1991, pp. 74–75.
  3. Vallance 1991, p. 75.
  4. Vallance 1991, pp. 75–77.
  5. Vallance 1991, pp. 77–78.
  6. Vallance 1991, pp. 78–79.
  7. Vallance 1991, p. 82, appendices 4 and 6.
  8. Vallance 1991, p. 82.
  9. Vallance 1991, pp. 82–83.
  10. Vallance 1991, p. 83.
  11. Vallance 1991, p. 84.
  12. Vallance 1991, pp. 79–81.
  13. Railway Magazine June 1958 p. 419
  14. Railway Magazine June 1958 p. 382
  15. Railway Magazine June 1958 p. 420

Books

  • Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.