Diastereomer

From Infogalactic: the planetary knowledge core
(Redirected from Diastereoisomer)
Jump to: navigation, search
Diastereomers
D-threose.svg D-erythrose.svg
DThreose Fischer.svg DErythrose Fischer.svg
D-Threose D-Erythrose

Diastereomers (sometimes called diastereoisomers) are a type of a stereoisomer.[1] Diastereomerism occurs when two or more stereoisomers of a compound have different configurations at one or more (but not all) of the equivalent (related) stereocenters and are not mirror images of each other.[2] When two diastereoisomers differ from each other at only one stereocenter they are epimers. Each stereocenter gives rise to two different configurations and thus increases the number of stereoisomers by a factor of two.

Diastereomers differ from enantiomers in that the latter are pairs of stereoisomers that differ in all stereocenters and are therefore mirror images of one another.[3] Enantiomers of a compound with more than one stereocenter are also diastereomers of the other stereoisomers of that compound that are not their mirror image. Diastereomers have different physical properties (unlike enantiomers) and different chemical reactivity. Diastereoselectivity is the preference for the formation of one or more than one diastereomer over the other in an organic reaction.

Syn / anti

When the single bond between the two centres is free to rotate, cis/trans descriptors are invalid. Two widely accepted prefixes used to distinguish diastereomers on sp³-hybridised bonds in an open-chain molecule are syn and anti. Masamune proposed the descriptors which work even if the groups are not on adjacent carbons. It also works regardless of CIP priorities. Syn describes groups on the same face while anti describes groups on opposite faces. The concept applies only to the Zigzag projection. The descriptors only describe relative stereochemistry rather than absolute stereochemistry.

Erythro / threo

Two older prefixes still commonly used to distinguish diastereomers are threo and erythro. In the case of carbohydrates, when drawn in the Fischer projection the erythro isomer has two identical substituents on the same side and the threo isomer has them on opposite sides.[4] When drawn as a zig-zag chain, the erythro isomer has two identical substituents on different sides of the plane (anti). The names are derived from the diastereomeric aldoses erythrose (a syrup) and threose (melting point 126 °C). These prefixes are not recommended for use outside of the realm of carbohydrates because their definitions can lead to conflicting interpretations.[5]

Another threo compound is threonine, one of the essential amino acids. The erythro diastereomer is called allo-threonine.

L-Threonin - L-Threonine.svg D-Threonine.svg
L-Threonine (2S,3R) and D-Threonine (2R,3S)
L-allo-Threonine.svg D-allo-Threonine.svg
L-allo-Threonine (2S,3S) and D-allo-Threonine (2R,3R)

Multiple stereocenters

If a molecule contains two asymmetric carbons, there are up to 4 possible configurations, and they cannot all be non-superimposable mirror images of each other. The possibilities continue to multiply as there are more asymmetric centers in a molecule. In general, the number of configurational isomers of a molecule can be determined by calculating 2n, where n = the number of chiral centers in the molecule. This holds true except in cases where the molecule has meso forms.

For n = 3, there are eight stereoisomers. There are four pairs of enantiomers: R,R,R and S,S,S; R,R,S and S,S,R; R,S,S and S,R,R; and R,S,R and S,R,S. There are four diastereomers, because each of the pairs of enantiomers is a diastereomer with respect to the other three. For n = 4, there are sixteen stereoisomers, or eight pairs of enantiomers. The four aldopentoses and the eight aldohexoses (subsets of the five- and six-carbon sugars) are examples of sets of compounds that differ in this way.

Example

Tartaric acid contains two asymmetric centers, but two of the "isomers" are equivalent and together are called a meso compound. This configuration is not optically active, while the remaining two isomers are D- and L- mirror images, i.e., enantiomers. The meso form is a diastereomer of the other forms.

L-tartaric acid.png

D-tartaric acid.png Meso-Weinsäure Spiegel.svg

(natural) tartaric acid
L-(+)-tartaric acid
dextrotartaric acid

D-(−)-tartaric acid
levotartaric acid

mesotartaric acid

(1:1)
DL-tartaric acid
"racemic acid"

The families of 4, 5 and 6 carbon carbohydrates contain many diastereomers because of the large numbers of asymmetric centres in these molecules.

Applications

As stated, two diastereomers will not have identical chemical properties. This knowledge is harnessed in chiral synthesis to separate a mixture of enantiomers. This is the principle behind chiral resolution. After preparing the diastereomers, they are separated by chromatography or recrystallization. Note also the example of the stereochemistry of ketonization of enols and enolates.

See also

References

  1. IUPAC "Gold Book" diastereoisomerism  doi:10.1351/goldbook.D01679
  2. Lua error in package.lua at line 80: module 'strict' not found..
  3. IUPAC "Gold Book" enantiomer  doi:10.1351/goldbook.E02069
  4. Modern physical organic chemistry Eric V. Anslyn,Dennis A. Dougherty 2006
  5. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006–) "erythro, threo".