Diesel-electric transmission

From Infogalactic: the planetary knowledge core
(Redirected from Diesel-electric)
Jump to: navigation, search
This Metra EMD F40PH locomotive uses a diesel-electric transmission designed by Electro-Motive Diesel

Diesel-electric transmission, or diesel-electric powertrain is used by a number of vehicle and ship types for providing locomotion.

A diesel-electric transmission system includes a diesel engine connected to an electrical generator, creating electricity that powers electric traction motors. No clutch is required. Before diesel engines came into widespread use, a similar system, using a petrol (gasoline) engine and called petrol-electric or gas-electric, was sometimes used.

Diesel-electric transmission is used on railways by diesel electric locomotives and diesel electric multiple units, as electric motors are able to supply full torque at 0 RPM. Diesel-electric systems are also used in submarines and surface ships and some land vehicles.

In some high-efficiency applications, electrical energy may be stored in rechargeable batteries, in which case these vehicles can be considered as a class of hybrid electric vehicle.


The first diesel motorship was also the first diesel-electric ship, the Russian tanker Vandal from Branobel, which was launched in 1903. Steam turbine-electric propulsion has been in use since the 1920s (Tennessee-class battleships), using diesel-electric powerplants in surface ships has increased lately. The Finnish coastal defence ships Ilmarinen and Väinämöinen laid down in 1928–1929, were among the first surface ships to use diesel-electric transmission. Later, the technology was used in diesel powered icebreakers.

In World War II the United States built diesel-electric surface warships. Due to machinery shortages destroyer escorts of the Evarts and Cannon classes were diesel-electric, with half their designed horsepower (The Buckley and Rudderow classes were full-power steam turbine-electric).[1] The Wind-class icebreakers, on the other hand, were designed for diesel-electric propulsion because of its flexibility and resistance to damage.[2][3]

Some modern ships, including cruise ships and icebreakers, use electric motors in pods called azimuth thrusters underneath to allow for 360° rotation, making the ships far more maneuverable.

Gas turbines are also used for electrical power generation and some ships use a combination: the Queen Mary 2 has a set of diesel engines in the bottom of the ship plus two gas turbines mounted near the main funnel; all are used for generating electrical power, including those used to drive the propellers. This provides a relatively simple way to use the high-speed, low-torque output of a turbine to drive a low-speed propeller, without the need for excessive reduction gearing.


Early submarines used a direct mechanical connection between the engine and propeller, switching between diesel engines for surface running, and electric motors for submerged propulsion. This was effectively a "parallel" type of hybrid, since the motor and engine were coupled to the same shaft. On the surface, the motor (driven by the engine) was used as a generator to recharge the batteries and supply other electric loads. The engine would be disconnected for submerged operation, with batteries powering the electric motor and supplying all other power as well.

True diesel-electric transmissions for submarines were first proposed by the United States Navy's Bureau of Engineering in 1928; instead of driving the propeller directly while running on the surface, the submarine's diesel would instead drive a generator that could either charge the submarine's batteries or drive the electric motor. This meant that motor speed was independent of the diesel engine's speed, and the diesel could run at an optimum and non-critical speed, while one or more of the diesel engines could be shut down for maintenance while the submarine continued to run using battery power. The concept was pioneered in 1929 in the S-class submarines S-3, S-6, and S-7 to test the concept. The first production submarines with this system were the Porpoise-class, and it was used on most subsequent US diesel submarines through the 1960s. No other navy adopted the system before 1945 except for the British Royal Navy's U-class submarines, although some submarines of the Imperial Japanese Navy used separate diesel generators for low-speed running.[4]

In a diesel-electric transmission arrangement, as used on 1930s and later US Navy, German, Russian and other nations' diesel submarines, the propellers are driven directly or through reduction gears by an electric motor, while two or more diesel generators provide electric energy for charging the batteries and/or driving the electric motors. This mechanically isolates the noisy engine compartment from the outer pressure hull and reduces the acoustic signature of the submarine when surfaced. Some nuclear submarines also use a similar turbo-electric propulsion system, with propulsion turbo generators driven by reactor plant steam.

Railway engines

During World War I, there was a strategic need for rail engines without plumes of smoke above them. Diesel technology was not yet sufficiently developed but a few precursor attempts were made, especially for petrol-electric transmissions by the French (Crochat-Collardeau, patent dated 1912 also used for tanks and trucks) and British (Dick, Kerr & Co. and British Westinghouse). About 300 of these locomotives, only 96 being standard gauge, were in use at various points in the conflict. Even before the war, the GE 57-ton gas-electric boxcab had been produced in the USA.

In the 1920s, diesel-electric technology first saw limited use in switchers (or shunters), locomotives used for moving trains around in railroad yards and assembling and disassembling them. An early company offering "Oil-Electric" locomotives was the American Locomotive Company (ALCO). The ALCO HH series of diesel-electric switcher entered series production in 1931. In the 1930s, the system was adapted for streamliners, the fastest trains of their day. Diesel-electric powerplants became popular because they greatly simplified the way motive power was transmitted to the wheels and because they were both more efficient and had greatly reduced maintenance requirements. Direct-drive transmissions can become very complex, considering that a typical locomotive has four or more axles. Additionally, a direct-drive diesel locomotive would require an impractical number of gears to keep the engine within its powerband; coupling the diesel to a generator eliminates this problem. An alternative is to use a torque converter or fluid coupling in a direct drive system to replace the gearbox. Hydraulic transmissions are claimed to be somewhat more efficient than diesel-electric technology.[5]

Road and other land vehicles


The diesel-electric powered Liebherr T282 dumper

Examples include:


In the automobile industry, diesel engines in combination with electric transmissions and battery power are being developed for future vehicle drive systems. Partnership for a New Generation of Vehicles was a cooperative research program between the U.S. government and "The Big Three" automobile manufacturers (DaimlerChrysler, Ford Motor Company, and General Motors Corporation) that developed diesel hybrid cars.

Production-ready cars

Military vehicles

Diesel-electric propulsion was tried on some military vehicles, such as tanks. Petrol-electric systems were tested on the British Mark II tank and French Saint Chamontin 1917. Ferdinand Porsche was the main developer of such drive-trains for military vehicles in World War II Nazi Germany, and created the Porsche Tiger of which somewhere around 90 units were produced and later converted into Elefant tank destroyers when Porsche lost the contract for the Tiger I to Henschel. Another noteworthy design was the 188-tonne Porsche type 205 prototypes, commonly known as the Maus super-heavy tank.


New Flyer DE60LF diesel-electric bus with rooftop batteries
MCI diesel electric prototype bus with batteries under the floor

Diesel electric based buses have also been produced, including hybrid systems able to run on and store electrical power in batteries. The two main providers of hybrid systems for diesel-electric transit buses include Allison Transmission and BAE Systems. New Flyer Industries, Gillig Corporation, and North American Bus Industries are major customers for the Allison EP hybrid systems, while Orion Bus Industries is a major customer for the BAE HybriDrive system. Mercedes-Benz makes their own diesel-electric drive system, which is used in their Citaro.

See also


  1. Silverstone, Paul H (1966). U.S. Warships of World War II. Doubleday and Company. pp. 153–167.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  2. Silverstone(66), page378
  3. "USCG Icebreakers". U.S. Coast Guard Cutter History. United States Coast Guard. Retrieved 2012-12-12.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  4. Friedman, Norman (1995). U.S. submarines through 1945: an illustrated design history. Naval Institute Press. pp. 259–260. ISBN 1557502633.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  5. [1]
  6. International starts hybrid production - eTrucker
  7. Dodge Sprinter Plug-in Hybrid Electric Vehicle (PHEV)
  8. Dodge - 2007 Sprinter - Passenger Vans, Cargo Vans
  9. Diesel hybrid car also taps the sun - Green Machines - MSNBC.com
  10. World’s first affordable diesel hybrid powertrain
  11. UK Company Zytek develops Affordable Ultra Efficient Diesel Hybrid System
  12. Frankfurt Green: Citroen C-Cactus - The Car Connection
  13. "Rivian Automotive - Waves of Change". Automoblog. 11 August 2011. Retrieved 11 August 2011.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  14. Geneva 2008: Volkswagen Golf TDI Hybrid
  15. Volvo's production-ready V60 Plug-in Diesel Hybrid
  16. http://www.ds5.citroen.com/

External links