Einstein ring

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found. In observational astronomy an Einstein ring, also known as an Einstein-Chwolson ring or Chwolson ring, is the deformation of the light from a source (such as a galaxy or star) into a ring through gravitational lensing of the source's light by an object with an extremely large mass (such as another galaxy or a black hole).[1][2] This occurs when the source, lens, and observer are all aligned. The first complete Einstein ring, designated B1938+666, was discovered by collaboration between astronomers at the University of Manchester and NASA's Hubble Space Telescope in 1998.[3]

Introduction

Gravitational lensing is predicted by Albert Einstein's theory of general relativity. Instead of light from a source traveling in a straight line (in three dimensions), it is bent by the presence of a massive body, which distorts spacetime. An Einstein Ring is a special case of gravitational lensing, caused by the exact alignment of the source, lens, and observer. This results in a symmetry around the lens, causing a ring-like structure.

The geometry of a gravitational lens

The size of an Einstein ring is given by the Einstein radius. In radians, it is

\theta_E = \sqrt{\frac{4GM}{c^2}\;\frac{d_{LS}}{d_L d_S}},

where

G is the gravitational constant,
M is the mass of the lens,
c is the speed of light,
d_L is the angular diameter distance to the lens,
d_S is the angular diameter distance to the source, and
d_{LS} is the angular diameter distance between the lens and the source.

Note that, over cosmological distances d_{LS}\ne d_S-d_L in general.

History

Gravitationally lensed galaxy SDP.81 taken by ALMA.[4]

The bending of light by a gravitational body was predicted by Albert Einstein in 1912, a few years before the publication of General Relativity in 1916 (Renn et al. 1997). The ring effect was first mentioned in academic literature by Orest Chwolson in 1924. Einstein remarked upon this effect in 1936 in a paper prompted by a letter by a Czech engineer, R W Mandl [1], but stated

<templatestyles src="Template:Blockquote/styles.css" />

Of course, there is no hope of observing this phenomenon directly. First, we shall scarcely ever approach closely enough to such a central line. Second, the angle β will defy the resolving power of our instruments.

— Science vol 84 p 506 1936

In this statement, β is the Einstein Radius currently denoted by \theta_E (as in the expression above). However, Einstein was only considering the chance of observing Einstein rings produced by stars, which is low; however, the chance of observing those produced by larger lenses such as galaxies or black holes is higher since the angular size of an Einstein ring increases with the mass of the lens.

Known Einstein rings

"Smiley" or "Cheshire Cat" image of galaxy cluster (SDSS J1038+4849) and gravitational lensing (an "Einstein ring") discovered by an international team of scientists,[5] imaged with HST.[6]

Hundreds of gravitational lenses are currently known. About half a dozen of them are partial Einstein rings with diameters up to an arcsecond, although as either the mass distribution of the lenses is not perfectly axially symmetrical, or the source, lens, and observer are not perfectly aligned, we have yet to see a perfect Einstein ring. Most rings have been discovered in the radio range. The degree of completeness needed for an image seen through a gravitational lens to qualify as an Einstein ring is yet to be defined.

The first Einstein ring was discovered by Hewitt et al. (1988), who observed the radio source MG1131+0456 using the Very Large Array. This observation saw a quasar lensed by a nearer galaxy into two separate but very similar images of the same object, the images stretched round the lens into an almost complete ring.[7] These dual images are another possible effect of the source, lens, and observer not being perfectly aligned.

The first complete Einstein ring to be discovered was B1938+666, which was found by King et al. (1998) via optical follow-up with the Hubble Space Telescope of a gravitational lens imaged with MERLIN.[3][8] The galaxy causing the lens at B1938+666 is an ancient elliptical galaxy, and the image we see through the lens is a dark dwarf satellite galaxy, which we would otherwise not be able to see with current technology.[9]

Some observed Einstein rings by SLACS

In 2005, the combined power of the Sloan Digital Sky Survey (SDSS) with the Hubble Space Telescope was used in the Sloan Lens ACS (SLACS) Survey to find 19 new gravitational lenses, 8 of which showed Einstein rings,[10] these are the 8 shown in the image to the right. As of 2009 this survey has found 85 confirmed gravitational lenses, there is not yet a number for how many show Einstein rings.[11] This survey is responsible for most of the recent discoveries of Einstein rings in the optical range, following are some examples which were found:

  • FOR J0332-3557, discovered by Remi Cabanac et al. in 2005,[12] notable for its high redshift which allows us to use it to make observations about the early universe.
  • The "Cosmic Horseshoe" is a partial Einstein ring which was observed through the gravitational lens of LRG 3-757, a distinctively large Luminous Red Galaxy. It was discovered in 2007 by V. Belokurov et al.[13]
  • SDSSJ0946+1006, the "double Einstein ring" was discovered by Raphael Gavazzi and Tomasso Treu[14] in 2008, notable for the presence of multiple rings observed through the same gravitational lens, the significance of which is explained in the next section on extra rings.
Montage of the SDP.81 Einstein Ring and the lensed galaxy.[15]

Another example is the radio/X-Ray Einstein ring around PKS 1830-211, which is unusually strong in radio.[16] It was discovered in X-Ray by Varsha Gupta et al. at the Chandra X-Ray observatory[17] It is also notable for being the first case of a quasar being lensed by an almost face-on spiral galaxy.[18]

There is also a radio ring around galaxy MG1654+1346, the image in the ring is that of a quasar radio lobe, discovered in 1989 by G.Langston et al.[19]

Extra rings

SDSSJ0946+1006 is a Double Einstein Ring. Credit: HST/NASA/ESA

Using the Hubble Space Telescope, a double ring has been found by Raphael Gavazzi of the STScI and Tommaso Treu of the University of California, Santa Barbara. This arises from the light from three galaxies at distances of 3, 6, and 11 billion light years. Such rings help in understanding the distribution of dark matter, dark energy, the nature of distant galaxies, and the curvature of the universe. The odds of finding such a double ring are 1 in 10,000. Sampling 50 suitable double rings would provide astronomers with a more accurate measurement of the dark matter content of the universe and the equation of state of the dark energy to within 10 percent precision.[20]

A simulation

Einstein rings near a black hole

To the right is a simulation depicting a zoom on a Schwarzschild black hole in front of the Milky Way. The first Einstein ring corresponds to the most distorted region of the picture and is clearly depicted by the galactic disc. The zoom then reveals a series of 4 extra rings, increasingly thinner and closer to the black hole shadow. They are easily seen through the multiple images of the galactic disk. The odd-numbered rings correspond to points which are behind the black hole (from the observer's position) and correspond here to the bright yellow region of the galactic disc (close to the galactic center), whereas the even-numbered rings correspond to images of objects which are behind the observer, which appear bluer since the corresponding part of the galactic disc is thinner and hence dimmer here.

See also

<templatestyles src="Div col/styles.css"/>

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.

Journals

  • Lua error in package.lua at line 80: module 'strict' not found. (refers to FOR J0332-3357)
  • Lua error in package.lua at line 80: module 'strict' not found. (The first paper to propose rings)
  • Lua error in package.lua at line 80: module 'strict' not found. (The famous Einstein Ring paper)
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

News

  • Lua error in package.lua at line 80: module 'strict' not found. (refers to FOR J0332-3357)
  • Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.