Erbium(III) oxide

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Erbium oxide[1]
Erbium oxide crystal structure
Sample of Erbium oxide.jpg
Names
Other names
Erbium oxide, erbia
Identifiers
12061-16-4 YesY
ChemSpider 4298039 YesY
Jmol 3D model Interactive image
PubChem 159426
  • InChI=1S/2Er.3O YesY
    Key: VQCBHWLJZDBHOS-UHFFFAOYSA-N YesY
  • InChI=1/2Er.3O/rEr2O3/c3-1-5-2-4
    Key: VQCBHWLJZDBHOS-YMHUIQTEAQ
  • O=[Er]O[Er]=O
Properties
Er2O3
Molar mass 382.56 g/mol
Appearance pink crystals
Density 8.64 g/cm3
Melting point 2,344 °C (4,251 °F; 2,617 K)
Boiling point 3,290 °C (5,950 °F; 3,560 K)
insoluble in water
Structure
Cubic, cI80
Ia-3, No. 206
Thermochemistry
108.5 J·mol−1·K−1
155.6 J·mol−1·K−1
−1897.9 kJ·mol−1
Related compounds
Other anions
Erbium(III) chloride
Other cations
Holmium(III) oxide, Thulium(III) oxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Erbium(III) oxide, is synthesized from the lanthanide metal erbium. It was partially isolated by Carl Gustaf Mosander in 1843, and first obtained in pure form in 1905 by Georges Urbain and Charles James.[2] It has a pink color with a cubic crystal structure. Under certain conditions erbium oxide can also have a hexagonal form.[3] Erbium oxide is toxic when inhaled, taken orally, or injected into the blood stream in massive amounts. The effect of erbium oxides in low concentrations on humans over long periods of time has not been determined.[4]

Reactions

Erbium metal tarnishes slowly in air. Erbium burns readily to form erbium (III) oxide:

Formation of erbium oxide: 4 Er + 3 O2 → 2 Er2O3 [5] Erbium oxide is insoluble in water and soluble in mineral acids. Er2O3 readily absorb moisture and carbon dioxide from the atmosphere.[3] It can react with acids to form the corresponding erbium(III) salts.

Reaction with hydrochloric acid: Er2O3 + 6 HCl → 2 ErCl3 + 3 H2O

Properties

One interesting property of erbium oxides is their ability to up convert energy. Energy up conversion takes place when infrared or visible radiation, low energy light, is converted to ultraviolet or violet radiation higher energy light via multiple transfer or absorption of energy.[6] Erbium oxide nanoparticles also possess photoluminescence properties. Erbium oxide nanoparticles can be formed by applying ultrasound (20 kHz, 29 W·cm−2) in the presence of multiwall carbon nanotubes. The erbium oxide nanoparticles that have been successfully made by employing ultrasound are erbium carboxioxide, hexagonal and spherical geometry erbium oxide. Each ultrasonically formed erbium oxide is photoluminescence in the visible region of the electromagnetic spectrum under excitation of 379 nm in water. Hexagonal erbium oxide photoluminescence is long lived and allows higher energy transitions (4S3/2 - 4I15/2). Spherical erbium oxide does not experience 4S3/2 - 4I15/2 energy transitions.[7]

Uses

The applications of Er2O3 are varied due to their electrical, optical and photoluminescence properties. Nanoscale materials doped with Er+3 are of much interest because they have special particle-size-dependent optical and electrical properties.[8] Erbium oxide doped nanoparticle materials can be dispersed in glass or plastic for display purposes, such as display monitors. The spectroscopy of Er+3 electronic transitions in host crystals lattices of nanoparticles combined with ultrasonically formed geometries in aqueous solution of carbon nanotubes is of great interest for synthesis of photoluminescence nanoparticles in ‘green’ chemistry.[7] Erbium oxide is among the most important rare earth metals used in biomedicine.[9] The photoluminescence property of erbium oxide nanoparticles on carbon nanotubes makes them useful in biomedical applications. For example, erbium oxide nanoparticles can be surface modified for distribution into aqueous and non-aqueous media for bioimaging.[8] Erbium oxides are also used as gate dielectrics in semi conductor devices since it has a high dielectric constant (10-14) and a large band gap. Erbium is sometimes used as a coloring for glasses[10] and erbium oxide can also be used as a burnable neutron poison for nuclear fuel.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.

External links