Explorer-class submarine

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Explorer class submarine.jpg
Class overview
Builders: Vickers-Armstrongs, Barrow-in-Furness
Preceded by: Amphion class
Succeeded by: Porpoise class
Cost: £2,000,000
In commission: 1958–1965
Completed: 2
General characteristics
Displacement:
  • 780 tons surfaced
  • 1,000 tons submerged
Length: 178 ft (54 m)
Beam: 15 ft 8 in (4.78 m)
Draught: 11 ft (3.4 m)
Propulsion:
Speed: 25 knots (46.3 km/h) (submerged)
Complement: 49
Armament: None

The two Explorer class submarines were experimental vessels built for the Royal Navy to test a propulsion system based on the use of highly concentrated Hydrogen peroxide (HTP) and diesel fuel to achieve high underwater endurance and speeds.

Germany had started experimenting with this technology early in the Second World War and developed it into the Walter cycle. They had built some experimental boats. One of these, the U-Boat 1407, which had been scuttled at the end of the war was salvaged and eventually recommissioned into the Royal Navy as HMS Meteorite.

This eventually led to the construction of the two Explorer class experimental vessels, which used steam turbines, the steam being generated using heat from the interaction of high-test hydrogen peroxide (HTP), a catalyst and diesel oil. They used the Porpoise class hull, modified with retractable superstructure fittings to help streamlining. Being purely experimental craft they had no torpedo tubes or radar fitted, only one periscope and were equipped with backup diesel engines to recharge the batteries and propel them on the surface.[1]

The first, Excalibur, was commissioned in March 1958. They were very fast boats, with a top underwater speed of around 26.5 knots for period up to 3 hours and 12 knots for 15 hours on one turbine.[1] Because of the use of hydrogen peroxide as a hair bleach, the submarines were nicknamed the Blonde-class. As well as providing experience with this type of technology, they also allowed the Royal Navy to practice against fast moving underwater targets. However the use of HTP was not successful, and there were several explosions, which resulted in the second nickname of Exploder being applied to the class and Explorer in particular, while Excalibur had the nickname "Excruciater'.[2] The subsequent use of HTP to power torpedoes led to the loss of HMS Sidon and the loss of the Russian submarine Kursk.

When the United States developed a nuclear reactor which could be installed in a submarine, the HTP project was abandoned. It was decided that it was not worth converting the class into normal diesel submarines. As a result Explorer was sold for £13,500 to T.W. Ward for breaking up. and Excalibur in turn was also subsequently sold to T.W. Ward.[3]

Other countries have since developed the concept of the non-nuclear air-independent propulsion submarine to the point where it is a safe technology albeit as an auxiliary power source to a conventional diesel-electric drive, although hydrogen peroxide has long been abandoned and liquid oxygen is generally now preferred.

Ships

  • HMS Explorer — (S30), launched 5 March 1954, commissioned 1958. Scrapped 5 March 1962.
  • HMS Excalibur — (S40), launched 25 February 1955, commissioned 1958. Scrapped 1968.

References

  1. 1.0 1.1 Miller & Jordan. Page 63.
  2. Preston. Page 161.
  3. http://www.btinternet.com/~warship/Postwar/Submarines/perox.htm. Retrieved 7-3-2009.[dead link]

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.