File:Lever shear flywheel.jpg
From Infogalactic: the planetary knowledge core
Size of this preview: 800 × 381 pixels. Other resolutions: 320 × 152 pixels | 1,153 × 549 pixels.
Original file (1,153 × 549 pixels, file size: 129 KB, MIME type: image/jpeg)
Summary
Key: "The stock is cut off between the shear blades a, b, the lower one of which is stationary and the other is attached to the short end of the lever c, the long end being moved by a crank or a cam. In the shear shown, two flywheels d, d are placed on the main driving shaft, so that their inertia will assist in operating the shear and enable it to cut heavier stock..."
Licensing
Lua error in package.lua at line 80: module 'strict' not found.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 01:07, 5 January 2017 | 1,153 × 549 (129 KB) | 127.0.0.1 (talk) | Key: "The stock is cut off between the shear blades <i>a</i>, <i>b</i>, the lower one of which is stationary and the other is attached to the short end of the lever <i>c</i>, the long end being moved by a crank or a cam. In the shear shown, two flywheels <i>d</i>, <i>d</i> are placed on the main driving shaft, so that their inertia will assist in operating the shear and enable it to cut heavier stock..." |
- You cannot overwrite this file.
File usage
The following page links to this file: