Hiten

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Lua error in package.lua at line 80: module 'strict' not found.

Hiten-Hagoromo (Muses-A)
Hiten.gif
Hiten spacecraft
Operator ISAS
Mission type Orbiter
Launch date 11:46, 24 January 1990 UTC
Launch vehicle Mu-3S-II (no. 5)
Mission duration 3 years, 2 months
Satellite of Moon
Orbital insertion date 19 March 1990
Orbits 10
COSPAR ID 1990-007A
Homepage ISAS Hiten page
Mass 197.4 kg

The Hiten Spacecraft (ひてん, Japanese pronunciation: [hiteɴ]), given the English name Celestial Maiden[1] and known before launch as MUSES-A (Mu Space Engineering Spacecraft A), part of the MUSES Program, was built by the Institute of Space and Astronautical Science of Japan and launched on January 24, 1990. It was Japan's first lunar probe, the first robotic lunar probe since the Soviet Union's Luna 24 in 1976, and the first lunar probe launched by a state other than the Soviet Union or the United States.[2]

Hiten was to have been placed into a highly elliptical Earth orbit with an apogee of 476,000 km, which would swing past the Moon. However, the injection took place with a delta-v deficit of 50 m/s, resulting in an apogee of only 290,000 km.[3] The deficiency was corrected and the probe continued on its mission.

On the first lunar swing-by, Hiten released a small orbiter, Hagoromo (はごろも, named after the feather mantle of Hiten), into lunar orbit. The transmitter on Hagoromo failed, but its orbit was visually confirmed from Earth. After the eighth swing-by, Hiten successfully demonstrated the aerobraking technique on March 19, 1991. This was the first aerobraking maneuver by a deep space probe.[4] After the ninth lunar swing-by and second aero-braking maneuver on March 30, 1991, the primary mission of the probe was concluded.

First ballistic capture into lunar orbit

After Hiten's primary mission had been completed, it was placed into temporary lunar orbit using a ballistic low energy transfer that required almost no delta-v. This was the first time a satellite had used this technique to transfer to a moon orbit.[3] On October 2, 1991, Hiten was captured temporarily into lunar orbit.

After that, Hiten was put into a looping orbit which passed through the L4 and L5 Lagrange points to look for trapped dust particles. The only scientific instrument on Hiten was the Munich Dust Counter (MDC), and no increase over background levels was found. On February 15, 1993, Hiten was placed into a permanent lunar orbit, where it remained until it was deliberately crashed into the lunar surface on April 10, 1993 at Lua error in package.lua at line 80: module 'strict' not found., between the craters Stevinus and Furnerius.

The low energy transfer used to extend this mission was suggested by Edward Belbruno of the Jet Propulsion Laboratory. He had been working on numerically modelling low energy trajectories, and heard of the probe's problems. He developed a ballistic capture trajectory for the main probe to enter lunar orbit[5] and on June 21, 1990, sent an unsolicited proposal to the Japanese space agency. They responded favorably, and later implemented a version of the proposal.[6]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. "Deep Space Chronicle: A Chronology of Deep Space and Planetary Probes 1958–2000" by Asif A. Siddiqi, NASA Monographs in Aerospace History No. 24.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.