Wheel hub motor

From Infogalactic: the planetary knowledge core
(Redirected from Hub motor)
Jump to: navigation, search
Raleigh SC30 with an aftermarket electric conversion hub motor kit installed.

The wheel hub motor (also called wheel motor, wheel hub drive, hub motor or in-wheel motor) is an electric motor that is incorporated into the hub of a wheel and drives it directly.

History

The Lohner-Porsche Mixte Hybrid, the world's first gasoline-electric hybrid automobile, used wheel hub motors.[1][2]
  • First wheel motor concept: Wellington Adams of St. Louis first conceived of building an electric motor directly in the vehicle wheel, though it was attached via complicated gearing. The Adams patent is US # 300,827 in 1884.
  • Practical wheel motor: Albert Parcelle of Boston, MA developed the first fully incorporated wheel hub motor in his "Electro-Motor Traction Wheel" and patented it in patent US # 433,180 in 1890.
  • High torque low RPM wheel motor invented: The motor was incorporated into the wheel without gearing and addressed torque considerations through the use of a new high torque, low rpm motor invented by Edward Parkhurst of Woburn, MA in patent # 422,149 in 1890 (and mismentioned in Parcelle's patent as #320,699).
  • Electric wheel motor advantages revealed in patent: An early wheel hub electric motor was invented by Frenchman Charles Theryc and patented in 1896 as US patent 572,036 entitled Wheel with Electric Motor hub for Vehicles. In the patent he explained all advantages including no transmission losses because of the absence of classic transmission rods from engines to wheels.
  • Diesel wheel motor: Not all wheel hub motors were electric. C F Goddard in 1896 invented a piston hub motor for horseless carriages patented in US # 574,200. He envisioned it powered by expanding gas of some kind. His offcenter flexible bent spoke designs later appeared in the Apollo moon rovers' wheels in 1960s.
  • Using cams, another type of combustion wheel motor: In patent # 593,248 W C Smith in 1897 developed another explosive gas expansion motor inside a wheel hub that utilized cams on a track in the hub to transmit power to the wheel.

The electric wheel hub motor was raced by Ferdinand Porsche in 1897 in Vienna, Austria. Porsche's first engineering training was electrical, not internal combustion based. As a result he developed his first cars as electric cars with electric wheel hub motors that ran on batteries. The Lohner Porsche, fitted with one wheel motor in each of the front wheels, appeared at the World Exhibition in Paris in 1900 and created a sensation in the young automobile world. In the following years, 300 Lohner Porsches were made and sold to wealthy buyers.[3]

Eventually the growth in power of the gasoline engine overtook the power of the electric wheel hub motors and this made up for any losses through a transmission. As a result autos moved to gas engines with transmissions, but they were never as efficient as electric wheel hub motors.

Uses in current and future vehicles

  • They are commonly found on electric bicycles.[4]
  • Wheel motors are applied in industry, e.g. driving wheels that are part of assembly lines.
  • They have not been used very often on cars, despite being invented for this purpose.(See History)
  • Hub motors can also be found on buses.[5]

Concept cars

PML Mini QED electric vehicle

Several concept cars have been developed using in-wheel motors:

Mechanism

Hub motor electromagnetic fields are supplied to the stationary windings of the motor. The outer part of the motor follows, or tries to follow, those fields, turning the attached wheel. In a brushed motor, energy is transferred by brushes contacting the rotating shaft of the motor. Energy is transferred in a brushless motor electronically, eliminating physical contact between stationary and moving parts. Although brushless motor technology is more expensive, most are more efficient and longer-lasting than brushed motor systems.

A hub motor typically is designed in one of three configurations. Considered least practical is an axial-flux motor, where the stator windings are typically sandwiched between sets of magnets. The other two configurations are both radial designs with the motor magnets bonded to the rotor; in one, the inner rotation motor, the rotor sits inside the stator, as in a conventional motor. In the other, the outer-rotation motor, the rotor sits outside the stator and rotates around it. The application of hub motors in vehicular uses is still evolving, and neither configuration has become standard. [16]

Electric motors have their greatest torque at startup, making them ideal for vehicles as they need the most torque at startup too. The idea of "revving up" so common with internal combustion engines is unnecessary with electric motors. Their greatest torque occurs as the rotor first begins to turn, which is why electric motors do not require a transmission. A gear-down arrangement may be needed, but unlike in a transmission normally paired with a combustion engine, no shifting is needed for electric motors.[citation needed]

Wheel hub motors are increasingly common on electric bikes and electric scooters in some parts of the world, especially Asia.[17][18]

Comparison with conventional EV design in automobiles

Compared with the conventional electric vehicle design with one motor situated centrally driving two (sometimes four) wheels by axles, the wheel motor arrangement has certain advantages and disadvantages:

Drive by wire

The Hiriko Fold pre-production model uses a hub wheel that integrates a motor, steering actuators, suspension and braking right inside the wheel, controlled by a drive-by-wire system.

Cars with electronic control of brakes and acceleration provide more opportunities for computerized vehicle dynamics such as:

  • Active cruise control, where the vehicle can maintain a given distance from a vehicle ahead
  • Collision avoidance, where the vehicle can automatically brake to avoid a collision
  • Emergency brake assist, where the vehicle senses an emergency stop and applies maximum braking
  • Active software differentials, where individual wheel speed is adjusted in response to other inputs
  • Active brake bias, where individual wheel brake effort is adjusted in real time to maintain vehicle stability
  • Brake steer, where individual wheel brake bias is adjusted to assist steering (similar to a tracked vehicle like a bulldozer)

While some of these features have started to appear as options for some internal combustion engine vehicles, optional ABS brakes can add up to $2,000 dollars to the cost of a base model.[19]

As wheel motors brake and accelerate a vehicle with a single solid state electric/electronic system many of the above features can be added as software upgrades rather than requiring additional systems/hardware be installed like with ABS etc. This should lead to cheaper active dynamic safety systems for wheel motor equipped road vehicles.

Weight savings

Eliminating mechanical transmission including gearboxes, differentials, drive shafts and axles provide a significant weight and manufacturing cost saving, while also decreasing the environmental impact of the product.[citation needed]

Unsprung weight concerns

The major disadvantage of wheel hub motors are that the weight of the electric motors would increase the unsprung weight, which adversely affects handling and ride (the wheels are more sluggish in responding to road conditions, especially fast motions over bumps, and transmit the bumps to the chassis instead of absorbing them). Most conventional electric motors include ferrous material composed of laminated electrical steel. This ferrous material contributes most of the weight of electric motors. To minimize this weight several recent wheel motor designs have minimized the electrical steel content of the motor by utilizing a coreless design with Litz wire coil windings to reduce eddy current losses. This significantly reduces wheel motor weight and therefore unsprung weight.[citation needed]

Another method used is to replace the cast iron friction brake assembly with a wheel motor assembly of similar weight. This results in no net gain in unsprung weight and a car capable of braking up to 1G.[20] A good example of this is the Michelin Active Wheel motor as fitted to the Heuliez Will that results in an unsprung weight of 35 kg on the front axle which compares favorably to a small car such as a Renault Clio that has 38 kg of unsprung weight on its front axle.[21]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Mixte Voiturette
  3. http://www.porsche.com/usa/aboutporsche/porschehistory/milestones/
  4. http://www.electricrider.com/crystalyte/
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  8. Lua error in package.lua at line 80: module 'strict' not found.[dead link]
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. http://www.ebikes.ca/hubmotors.shtml
  18. http://www.electricrider.com/crystalyte/motordimensions.htm
  19. http://www.openroad.com.au/motoring_roadsafety_priceofsafety.asp
  20. http://www.youtube.com/watch?v=i1uTR-8KarE
  21. http://www.causecast.org/news_items/7667-michelin-unveils-active-wheel-in-affordable-electric-car

External links