IBM 608

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

The IBM 608 Transistor Calculator a plugboard-programmable unit, was the first IBM product to use transistor circuits without any vacuum tubes and is believed to be the world's first all-transistorized calculator to be manufactured for the commercial market.[1][2]:34 The 608 contained more than 3,000 germanium transistors.[2]:50 Announced in April 1955,[3] it was released in December 1957. It was similar in nature of operation to the vacuum tube IBM 604, which had been introduced a decade earlier.[2]:34 Although the 608 outpaced its immediate predecessor, the IBM 607 by a factor of 2.5,[3] it was soon rendered obsolete by newer IBM products and only a few dozen were ever delivered.[2]:48[4] The 608 was withdrawn from marketing in April 1959.[3]

The use of transistors was a significant departure from the previous IBM calculators of this line. The 608 also used magnetic core memory, but was still programmed using a control panel.[5] The main memory of the 608 could store 40 nine-digit numbers, and it had an 18-digit accumulator.[5] In raw speed terms, it could perform 4,500 additions per second, it could multiply two nine-digit numbers, yielding an 18-digit result in 11 milliseconds, and it could divide an 18-digit number by a nine-digit number to produce the nine-digit quotient in 13 milliseconds.[3] The 608 could handle 80 program steps.[5]

The 608 was supplied with a type 535 card reader/punch which had its own control plugboard.

To spur the adoption of transistor technology, shortly before the first IBM 608 shipped, Tom Watson directed that a date be set after which no new vacuum-tube-based products would be released.[6] This decision constrained IBM product managers, who otherwise had the latitude to select components for their products, to make the move to transistors. As a result, the successor to the IBM 650 used transistors, and it became the IBM 7070—the company's first transistorized stored-program computer.[2]:50

The chief designer of the circuits used in the IBM 608 was Robert A. Henle, who later oversaw the development of emitter-coupled logic (ECL) class of circuits.[2]:59 The development of the 608 was preceded by the prototyping of an experimental all-transistor version of the 604. Although this was built and demonstrated in October 1954, it was not commercialized.[2]:50

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 3.2 3.3 IBM Archives: IBM 608 calculator
  4. Bashe 1986, p. 464
  5. 5.0 5.1 5.2 Frank da Cruz, The IBM 608 Calculator, Columbia University Computing History
  6. Bashe 1986, p. 387