Iberian gauge

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Track gauge
By transport mode
Tram · Rapid transit
Miniature · Scale model
By size (list)
Graphic list of track gauges

Minimum
  Fifteen inch 381 mm (15 in)

Narrow
  600 mm,
Two foot
597 mm
600 mm
603 mm
610 mm
(1 ft ​11 12 in)
(1 ft ​11 58 in)
(1 ft ​11 34 in)
(2 ft)
  750 mm,
Bosnian,
Two foot six inch,
800 mm
750 mm
760 mm
762 mm
800 mm
(2 ft ​5 12 in)
(2 ft ​5 1516 in)
(2 ft 6 in)
(2 ft ​7 12 in)
  Swedish three foot,
900 mm,
Three foot
891 mm
900 mm
914 mm
(2 ft​11 332 in)
(2 ft ​11 716)
(3 ft)
  Metre 1,000 mm (3 ft ​3 38 in)
  Three foot six inch,
Cape, CAP, Kyōki
1,067 mm (3 ft 6 in)
  Four foot six inch 1,372 mm (4 ft 6 in)

  Standard 1,435 mm (4 ft ​8 12 in)

Broad
  Russian,
Five foot
1,520 mm
1,524 mm
(4 ft ​11 2732 in)
(5 ft)
  Irish 1,600 mm (5 ft 3 in)
  Iberian 1,668 mm (5 ft ​5 2132 in)
  Indian 1,676 mm (5 ft 6 in)
  Six foot 1,829 mm (6 ft)
  Brunel 2,140 mm (7 ft ​14 in)
Change of gauge
Break-of-gauge · Dual gauge ·
Conversion (list· Bogie exchange · Variable gauge
By location
North America · South America · Europe
World map, rail gauge by region

Iberian gauge (Spanish: ancho ibérico, trocha ibérica, Portuguese: bitola ibérica) is the name given to the track gauge most extensively used by the railways of Spain and Portugal: 1,668 mm (5 ft 5 2132 in). This is the second widest gauge in regular use anywhere in the world.

As finally established in 1955,[1] the Iberian gauge is a compromise between the similar, but slightly different, gauges adopted as respective national standards in Spain and Portugal in the mid-19th century. The main railway networks of Spain were initially constructed to a 1,672 mm (5 ft 5 1316 in) gauge of six Castilian feet, or two Castilian yards. Those of Portugal were instead built to a 1,435 mm (4 ft 8 12 in) and later railways to a 1,664 mm (5 ft 5 12 in) gauge of five Portuguese feet – close enough to allow interoperability with Spanish railways.[2]

Causes for the difference from international standard gauge

A commonly cited reason for the adoption of this gauge, broader than that which became the international standard, is that it was intended to hinder any use of the railroad in any of the French invasion attempts. This is possible, but the 19 January 1845 governmental decree does not state any reason, simply the gauge itself. It is known that the government entrusted such decisions to a committee, whose main work was done by civil engineers Juan Subercase and Calixto de Santa Cruz: both good civil engineers but with little experience in railroads. Their judgement, made because of their profession and lack of experience in railroads, was that since the Spanish landscape was more mountainous than that of England and France, a wider gauge would make more powerful locomotives possible, with larger boilers and, more importantly, larger fireboxes.[3] This was obviously a miscalculation; in other areas of Spain, narrower gauges were used in the most mountainous areas, since Iberian gauge civil engineering works would have been more expensive. One example of this is the 1,000 mm (3 ft 3 38 in) gauge FEVE.

Adoption of the international gauge in Spain and Portugal

Since the beginning of the 1990s new high-speed passenger lines in Spain have been built to the international standard gauge of 1,435 mm (4 ft 8 12 in), to allow these lines to link to the European high-speed network. Although the 22 km from Tardienta to Huesca (part of a branch from the Madrid to Barcelona high-speed line) has been reconstructed as mixed Iberic and standard gauge, in general the interface between the two gauges in Spain is dealt with by means of gauge-changing installations, which can adjust the gauge of appropriately designed wheelsets on the move.[4][5]

Plans exist to convert more of the Iberian-gauge network in Spain and Portugal to standard gauge, an indication of which is the use, on several stretches of recently relaid broad-gauge track, of concrete sleepers pre-drilled with additional bolt holes allowing for repositioning of one rail to adjust the track to standard gauge (or to dual gauge) or the narrowing of the gauge by moving both rails closer together maintaining the perfect alignment of the loading gauge.[6][7]

Similar gauges

Indian gauge (1,676 mm or 5 ft 6 in) is closely similar, with only 8mm difference, and allow compatibility with the rolling stock. For example, Chile and Argentina buy second hand Spanish\Portugal Iberian-gauge rolling stock.

Installations

Country/territory Railway
Portugal REFER network. Adjusted from the original 1,664 mm (5 ft 5 12 in) in the 19th century. Other gauges used in Portugal: 7 ft 14 in (2,140 mm)[8] or 7 ft (2,134 mm)[9] (Azores), 1,435 mm (4 ft 8 12 in), 1,000 mm (3 ft 3 38 in), 900 mm (2 ft 11 716 in), and 600 mm (1 ft 11 58 in)
Spain Adjusted from the original 1,672 mm (5 ft 5 1316 in) in the 19th century. Adif-managed national railway network (except new high-speed railway lines).
Although Lleida–La Pobla de Segur Line is both managed and operated by Ferrocarrils de la Generalitat de Catalunya (FGC), it was formerly part of the national railway network and was constructed to the 1,668 mm (5 ft 5 2132 in) gauge.
Barcelona Metro line 1 still uses the former 1,672 mm (5 ft 5 1316 in) gauge.

See also

References

  1. 1955
  2. The gauge of the early Portuguese lines built to the "English" (later: international) gauge was subsequently altered to Iberian to ensure interoperability – Assim, em 20 de Junho de 1860, funda a Companhia Real dos Caminhos de Ferro Portugueses que se propõe explorar as Linhas do Norte e do Leste e as linhas de que posteriormente obtivesse concessão. Thus, on June 20, 1860, founded the Society of Real Caminhos de Ferro Portugueses it proposes to exploit the lines of North and the East and the lines that subsequently obtain concession. De imediato a Companhia Real muda a bitola (1,44 metros) da linha já construída entre Lisboa e Asseca (68 Km.), passando-a para a bitola ibérica, com 1,67 metros, sem haver qualquer interrupção no serviço ferroviário. From immediate changes to the Company Real gauge (1.44 m) of the line already built between Lisbon and of Asseca (68 km), passing it to gauge the Iberian, with 1.67 metres, without any interruption in rail service. [1] [2][dead link]
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Talgo Date=2008-09-04
  5. :: CAF - Construcciones y Auxiliar de Ferrocarriles, we create railway solutions ::
  6. Verkehrsrundschau, 2007-04-30
  7. http://www.travelinside.ch/primus/notdArchiv.php?we_objectID=5380
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.