John Kilpatrick Turnpike

From Infogalactic: the planetary knowledge core
(Redirected from Kilpatrick Turnpike)
Jump to: navigation, search

Kilpatrick Turnpike marker

Kilpatrick Turnpike
Template:Maplink-road
The John Kilpatrick Turnpike highlighted in red
Route information
Maintained by OTA
Length: 29.4 mi (47.3 km)
Existed: September 1, 1991 – present
Major junctions
West end: SH-152 in Oklahoma City
 
East end: I‑35 / I‑44 / Turner Turnpike in Oklahoma City
Location
Counties: Canadian, Oklahoma
Highway system

The John Kilpatrick Turnpike is a toll road in Oklahoma City, Oklahoma. The turnpike forms a partial loop that runs from State Highway 152 (SH-152) in the west to an interchange with Interstate 35 (I-35) and I-44 in the east. At the eastern terminus, traffic continuing east merges with I-44 traffic, forming the Turner Turnpike. The Kilpatrick Turnpike is 29.4 miles (47.3 km) long.

Route description

The Kilpatrick Turnpike's entire route lies within the city limits of Oklahoma City. There are no exit numbers assigned to any of the turnpike's interchanges.[1]

The Kilpatrick Turnpike begins at an interchange with SH-152 just west of Council Road in southwestern Oklahoma City. The turnpike heads generally north and west from this interchange, with exits to Morgan Road, Sara Road/SW 29th Street, and a partial interchange with SW 15th street, with traffic exiting from southbound and entering northbound. From there, it angles northeast to a full interchange with I-40/US-270. Another partial interchange is located at N.W. 10th Street, with ramps allowing drivers to join the northbound turnpike and exit the southbound turnpike. The turnpike continues north, passing just east of the Yukon city limits, before making an S-curve to the east, running west of Lake Overholser. The turnpike's first full interchange is with State Highway 66 (SH-66), which runs along N.W. 39th Expressway. North of this interchange, the Kilpatrick Turnpike crosses the North Canadian River. The next interchange is with Wilshire Boulevard. Immediately north of Wilshire Boulevard is the first barrier toll plaza. The highway's next interchange is with SH-3, also known as the Northwest Expressway. The turnpike curves to the east north of here, entering Oklahoma County.[1]

East of the county line, the Kilpatrick Turnpike follows the route of Memorial Road; Memorial splits into a pair of one-way frontage roads during this stretch. The next interchange, at Council Road, allows eastbound traffic to exit and westbound to enter the turnpike. The two interchanges to the east of here, at Rockwell Avenue and MacArthur Road, allow full access. At Meridian Avenue, traffic can exit the turnpike westbound and enter it eastbound. To the east lies an interchange with SH-74, a freeway known as the Lake Hefner Parkway. The interchange only allows direct access from the westbound Kilpatrick Turnpike to southbound SH-74 and from northbound SH-74 to the eastbound turnpike; all other movements must be completed via Memorial Road.[2] The turnpike continues east, with full interchanges at May and Pennsylvania (Penn) avenues. East of Penn, the highway curves southeast, leaving the Memorial Road corridor. The next interchange is at Western Avenue. To the east of here is the second barrier toll plaza. After the toll plaza is the interchange with US-77, a freeway also known as the Broadway Extension. The turnpike then has an interchange at Eastern Avenue. The turnpike then comes to an end at I-35/I-44. Eastbound I-44 splits away from northbound I-35 at this interchange to form the Turner Turnpike, and the eastbound Kilpatrick Turnpike mainline merges into the Turner Turnpike toward Tulsa.[1]

Law enforcement along the John Kilpatrick Turnpike is provided by Oklahoma Highway Patrol Troop YE, a special troop assigned to the turnpike.[3]

History

In 1987, the Oklahoma Legislature authorized construction of the first phase of the turnpike, between I-35 and Lake Hefner Parkway. It was completed in 1991. In 2001, an extension of the turnpike to I-40 was completed.[4]

On October 29, 2015, Governor Mary Fallin announced that the Kilpatrick Turnpike would be extended south to end at SH-152 near Will Rogers World Airport as part of Driving Forward, a $892 million turnpike package. The project began on January 20, 2018.[5] The westbound direction of the extension was opened January 9, 2020.[6] The eastbound direction was opened on the following dates: January 28 from I-40 to Morgan Road, February 4 from Morgan to SH-152 westbound, and February 14 to SH-152 eastbound.[7]

In February 2021, the OTA announced that all of the turnpikes will be going all-electronic tolling within the next five years, starting with the Kilpatrick Turnpike. This change (known as PlatePay) began on the Kilpatrick in July 2021.[8]

Future

On August 2, 2021, the Oklahoma Transportation Commission approved the designation of the John Kilpatrick Turnpike as part of an extension of I-240, forming a beltway around Oklahoma City. ODOT Director Tim Gatz stated in the Transportation Commission meeting that the numbering change was primarily to aid in navigation using digital mapping and routing applications. Gatz also said, "If you look at the Interstate 240 designation on the loop around the Oklahoma City metropolitan area, we are finally to the point where we have a truly contiguous route there that can shoulder the burden of some of that transportation need in a loop format. That's common practice across the country, and you'll see that in many of the metropolitan areas, and that update will really be beneficial as far as everything from signage to how do you describe that route on a green-and-white sign." The designation must be approved by the American Association of State Highway and Transportation Officials (AASHTO) and the Federal Highway Administration (FHWA) to take effect.[9]

Tolls

As of 25 July 2021, it costs $6.65 with PlatePay ($3.20 with Pikepass) to drive the entire length of the turnpike.[10]

Exit list

The entire route is in Oklahoma City. All exits are unnumbered.

County mi[2] km Destinations Notes
Oklahoma 0.000 0.000 SH-152 / Invalid type: road Counterclockwise terminus;[11] highway continues east toll-free as SH-152 (Airport Road)
Council Road Westbound entrance only
Canadian 0.89 1.43 Toll plaza
1.70 2.74 Morgan Road
3.60 5.79 SW 29th Street Northbound exit and Southbound entrance
3.80 6.12 Sara Road Northbound entrance and Southbound exit
5.00 8.05 SW 15th Street Southbound exit and northbound entrance[11]
5.90 9.50 I‑40 (US-270) – Oklahoma City, Downtown, Yukon, Amarillo I-40 east exit 138B, west exit 139A[11]
7.10 11.43 NW 10th Street Southbound exit and northbound entrance
9.90 15.93 SH-66 – Bethany, Yukon
12.50 20.12 Wilshire Boulevard
13.12 21.11 Toll plaza
14.50 23.34 SH-3 / Morgan Road / Hefner Road
Oklahoma 17.40 28.00 Council Road Eastbound exit and westbound entrance
18.80 30.26 Rockwell Avenue
19.80 31.87 MacArthur Boulevard
20.80 33.47 Meridian Avenue Westbound exit and eastbound entrance
21.80 35.08 SH-74 south (Lake Hefner Parkway) to I‑44 Signed as one single exit eastbound
SH-74 north (Portland Avenue)
22.80 36.69 May Avenue
23.80 38.30 Penn Avenue Full name "Pennsylvania"
24.80 39.91 Western Avenue
25.64 41.26 Toll plaza
26.50 42.65 US-77 – Oklahoma City, Edmond Direct access from US-77 south to the turnpike east opened to traffic in June 2022
28.00 45.06 Eastern Avenue
29.30 47.15 I‑35 south / I‑44 west (SH-66 west) – Oklahoma City, Downtown Eastbound exit and westbound entrance
29.40 47.31 I‑35 north (SH-66 east) – Wichita Left exit eastbound; no westbound exit
29.70 47.80 I‑44 / Turner Turnpike east – Tulsa Turner Tpk. (I-44 east) continues beyond clockwise terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Google Maps
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. 11.0 11.1 11.2 Lua error in package.lua at line 80: module 'strict' not found.

External links