Laser-induced fluorescence

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found. Laser-induced fluorescence or LED-induced fluorescence (LIF) is a spectroscopic method used for studying structure of molecules, detection of selective species and flow visualization and measurements.

The species to be examined is excited with a laser. The wavelength is often selected to be the one at which the species has its largest cross section. The excited species will after some time, usually in the order of few nanoseconds to microseconds, de-excite and emit light at a wavelength longer than the excitation wavelength. This fluorescent light is typically recorded with a photomultiplier tube (PMT) or Filtered Photodiodes.

Two different kinds of spectra exist, disperse spectra and excitation spectra.

The disperse spectra are performed with a fixed lasing wavelength, as above and the fluorescence spectrum is analyzed. Excitation scans on the other hand collect fluorescent light at a fixed emission wavelength or range of wavelengths. Instead the lasing wavelength is changed.

An advantage over absorption spectroscopy is that it is possible to get two- and three-dimensional images since fluorescence takes place in all directions (i.e. the fluorescence signal is usually isotropic). The signal-to-noise ratio of the fluorescence signal is very high, providing a good sensitivity to the process. It is also possible to distinguish between more species, since the lasing wavelength can be tuned to a particular excitation of a given species which is not shared by other species.

LIF is useful in the study of the electronic structure of molecules and their interactions. It has also been successfully applied for quantitative measurement of concentrations in fields like combustion, plasma, spray and flow phenomena (such as Molecular tagging velocimetry), in some cases visualizing concentrations down to nanomolar levels. LED-induced fluorescence has been used in situ to delineate aromatic hydrocarbon contamination as a cone penetrometer add on module and also as a percussive capable asset.

Recent application

  • Detection of purity.[1] Used in optical tumor diagnosis.

See also

Notes

  1. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.

External links


<templatestyles src="Asbox/styles.css"></templatestyles>