Marussia MR03

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Marussia MR03
Jules Bianchi Bahreïn 2014.jpg
250px
Marussia MR03 (top) driven by Jules Bianchi, MR03B (bottom) driven by Roberto Merhi
Category Formula One
Constructor Marussia
Designer(s) John McQuilliam
Predecessor Marussia MR02
Successor Manor MRT05
Technical specifications[1]
Chassis Carbon-fibre composite
Suspension (front) Carbon-fibre wishbone and pushrod suspension elements operating inboard torsion bar and damper system
Suspension (rear) Carbon-fibre wishbone and pullrod suspension elements operating inboard torsion bar and damper system
Engine Ferrari 059/3 1.6 L (98 cu in) V6, turbo
Transmission Semi-automatic, sequential
8 forward gears, 1 reverse gear
Weight 691 kg (1,523 lb) (2014)
702 kg (1,548 lb) (2015)
Fuel Shell
Lubricants Valvoline Racing
Tyres Pirelli P Zero (dry), Cinturato (wet)
Competition history
Notable entrants Marussia F1 Team
Manor Marussia F1 Team
Notable drivers 4. United Kingdom Max Chilton[2]
17. France Jules Bianchi[3]
28. United Kingdom Will Stevens[4]
53. United States Alexander Rossi
98. Spain Roberto Merhi[4]
Debut 2014 Australian Grand Prix
Races Wins Podiums Poles F.Laps
35 0 0 0 0

The Marussia MR03 is a Formula One racing car designed and built by the Marussia F1 Team. It competed for part of the 2014 Formula One season,[5] before the team went into administration in November 2014.[6] Following the team's resurrection as Manor Marussia F1, the car raced as the MR03B after modifications were made to enable it to compete in, and meet the regulations in place for, 2015.[7]

Marussia MR03

The MR03 was driven in 2014 by Jules Bianchi and Max Chilton, both of whom returned to the team for a second consecutive season.[2][3] The car was the first car designed by Marussia to use an engine built by Ferrari,[8] the 059/3.[9] In general terms, and compared to previous years' cars, the MR03 performed better relative to the opposition. In addition, with this car, Bianchi recorded his and Marussia's first points ever in Formula One at the Monaco Grand Prix.

As a result of the serious crash that involved Bianchi at the Japanese Grand Prix – and which caused his death some eight months later – for the subsequent and inaugural Russian Grand Prix the team decided to only race with Chilton. This decision was made after the team's initial registration of their reserve driver, American rookie Alexander Rossi.[10] As a further sign of respect and support, the MR03 featured a "#JB17" livery on the sides of the cockpit, being a reference to Bianchi's initials and race number.

After entering into administration in late October 2014, the team did not attend a race event for the first time in its history resulting, therefore, in the MR03 not being fielded at the United States Grand Prix.[11] With the team folding in November 2014, the MR03 did not further participate in the 2014 Formula One season.

Marussia MR03B

Following special FIA permission sought by the Manor-Marussia team in February 2015, the car was modified into the MR03B after basic modifications to meet 2015 regulations, pending a new chassis being built – that ultimately never materialised. The revised car differed most notably in the nosecone area and had to weigh more, from 691 kg (1,523 lb) to 702 kg (1,548 lb), due to new technical specifications in 2015. The MR03B continued to bear the "#JB17" logo in honour of Jules Bianchi.[12]

Will Stevens and Roberto Merhi were contracted to drive,[4] but the late rescue package meant that the car arrived at the opening round of the season without any form of testing.[7] Ultimately, they did not qualify for the race, as they had not participated in qualifying or any session during the weekend. This was due mostly in part to the team's computers being wiped clean of data in the days leading up to the auction; the oversight went completely undetected by the entire team until the days before the Grand Prix when the car was being assembled in Australia. The team was cleared of any malicious wrongdoing by the FIA after a hearing,[13] and resolved their software issues in time for the next event.

Alexander Rossi driving the reliveried MR03B at the 2015 United States Grand Prix

During the Canadian Grand Prix and British Grand Prix, the car received new liveries for use for the remainder of the 2015 season thanks to new sponsors Airbnb and Flex-Box, respectively an accommodation rental company and a shipping and storage container manufacturer and supplier.[14][15] In addition to the new livery, the MR03B also received its first technical updates at the British Grand Prix.[15]

At the 2015 United States Grand Prix, the MR03B featured a further revised livery – adding the stars and the stripes from the flag of the United States  – and a new sponsor Coupons.com,[16] which was introduced with Rossi on his third race for the team. Rossi replaced Merhi for five out of the last seven races of the season, competing in the races that did not clash with his main campaign, in the GP2 Series.[17]

Complete Formula One results

(key)

Year Entrant Chassis Engine Tyres Drivers 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Pts WCC
2014 Marussia F1 Team MR03 Ferrari 059/3 P AUS MAL BHR CHN ESP MON CAN AUT GBR GER HUN BEL ITA SIN JPN RUS USA BRA ABU 2 9th
Max Chilton 13 15 13 19 19 14 Ret 17 16 17 16 16 Ret 17 18 Ret
Jules Bianchi NC Ret 16 17 18 9 Ret 15 14 15 15 18† 18 16 20†
2015 Manor Marussia F1 Team MR03B Ferrari 059/3 P AUS MAL CHN BHR ESP MON CAN AUT GBR HUN BEL ITA SIN JPN RUS USA MEX BRA ABU 0 10th
Will Stevens DNP DNS 15 16 17 17 17 Ret 13 16† 16 15 15 19 14 Ret 16 17 18
Roberto Merhi DNP 15 16 17 18 16 Ret 14 12 15 15 16 13 19
Alexander Rossi 14 18 12 15 18

† Driver failed to finish the race, but was classified as they had completed greater than 90% of the race distance.
‡ Teams and drivers scored double points at the 2014 Abu Dhabi Grand Prix.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. 15.0 15.1 Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
 
Search Wikimedia Commons
  Wikimedia Commons has media related to: