This is a good article. Click here for more information.

Maryland Route 404

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Maryland Route 404 marker

Maryland Route 404
Route information
Maintained by MDSHA
Length: 24.61 mi[1] (39.61 km)
Existed: 1933 – present
Tourist
routes:		 Harriet Tubman Underground Railroad Byway
Major junctions
West end: MD 662 in Wye Mills
  US 50 in Wye Mills

MD 309 in Queen Anne
MD 303 in Queen Anne
MD 480 in Hillsboro
MD 312 near Ridgely
MD 328 in West Denton
MD 313 in Denton

MD 16 near Denton
East end: DE 404 at Delaware border near Andersontown
Location
Counties: Talbot, Queen Anne's, Caroline
Highway system
← MD 402 MD 405 →

Maryland Route 404 (MD 404) is a major highway on Maryland's Eastern Shore in the United States. It runs 24.61 miles (39.61 km) from MD 662 in Wye Mills on the border of Queen Anne's and Talbot counties, southeast to the Delaware state line in Caroline County, where the road continues as Delaware Route 404 (DE 404) to Nassau (near Rehoboth Beach). The Maryland and Delaware state highways together cross the width of the Delmarva Peninsula and serve to connect the cities west of the Chesapeake Bay by way of the Chesapeake Bay Bridge and U.S. Route 50 (US 50) with the Delaware Beaches. Along the way, MD 404 passes through mostly farmland and woodland as well as the towns of Queen Anne, Hillsboro, and Denton. The road is a two-lane undivided highway for most of its length with the exception of the bypass around Denton and a section near Hillsboro, which is a four-lane divided highway.

MD 404 was designated by 1933 to run from Matapeake (where the Annapolis-Matapeake ferry across the Chesapeake Bay connected the route to Annapolis), east along present-day MD 8, US 50, and MD 662 to Wye Mills, where it followed its current routing to the Delaware border. By 1946, the route’s western terminus was moved to MD 2 north of Annapolis, where it headed east across the Chesapeake Bay on the Sandy Point-Matapeake ferry. The western terminus was cut back to Wye Mills in 1949, having been replaced with US 50 west of there. The route was realigned to bypass Queen Anne and Hillsboro in 1960 and Denton in 1987.

Since MD 404 is the main route for travelers between the Chesapeake Bay Bridge and the Delaware Beaches, the road has a high accident rate. To improve on this situation, the Maryland State Highway Administration is planning to widen the two-lane portions of the route into a four-lane divided highway. A portion of the road east of Tuckahoe Creek in Caroline County received $7.7 million for widening as a part of the stimulus bill signed into law by President Barack Obama in 2009.

Route description

MD 404 running east through Wye Mills

MD 404 begins at an intersection with MD 662 (Old Wye Mills Road) in Wye Mills on the border of Queen Anne's and Talbot Counties, heading to the east on Queen Anne's Highway, a two-lane undivided road.[1] It heads east through farmland along the Queen Anne's/Talbot County border before reaching an intersection with US 50 (Ocean Gateway).[2] Upon crossing US 50, MD 404 becomes a part of the main route between the Chesapeake Bay Bridge and the Delaware Beaches.[1][3][4] MD 404 continues east through farmland with some residences and wooded areas as a two-lane road, approaching the town of Queen Anne.[1][2]

Further east, Old Queen Anne Road splits from MD 404, with MD 404 crossing entirely into Queen Anne's County.[1] It resumes east through some farmland before coming to an intersection with MD 309 (Starr Road).[2] Past MD 309, the route intersects the northern terminus of MD 303 (Main Street), which intersects the route as a northbound-only road that provides access to eastbound MD 404. From MD 303, the road heads into wooded areas adjacent to Tuckahoe State Park before crossing the Tuckahoe Creek.[1][2]

MD 404 eastbound in Queen Anne after MD 309

MD 404 enters Caroline County upon crossing the Tuckahoe Creek, where it becomes Shore Highway.[1] It widens into a four-lane divided highway and emerges from the woods into agricultural areas, intersecting MD 480 (Ridgely Road) near Hillsboro. Past that intersection, the route heads through a mix of woods and residences, narrowing back into a two-lane undivided road, before intersecting MD 404 Alt. (Hillsboro Road), where MD 404 heads into a mix of farms and woodland.[1][2] Unsigned MD 485 (Saathoff Road) loops to the south of MD 404, returning to the route before the intersection with the southern terminus of MD 312 (Downes Station Road).[1] The route continues to the southeast through farms, heading toward Denton. As the road approaches Denton, it widens into a four-lane divided highway that heads through rural areas with some residences and businesses.[2] MD 404 Bus. (Meeting House Road) splits from MD 404 to head through the center of Denton while MD 404 continues east to bypass Denton to the north.[1]

The route continues east through fields before intersecting MD 328 (New Bridge Road).[2] Past this intersection, MD 404 crosses over the Choptank River. It continues east as a limited-access road with a diamond interchange with MD 313 (Greensboro Road) and unsigned MD 619 (Sixth Street), where some businesses are located.[1][2] MD 313 forms a concurrency with MD 404 and the two routes turn south, heading along the eastern side of Denton through woodland and then past residential neighborhoods. It turns to the southwest, heading into woods and intersecting MD 404 Bus. (Franklin Street/Gay Street) at an at-grade intersection. MD 313 and MD 404 continue as a surface road that turns south and heads through some commercial areas.[1][2]

The road heads south into farmland, passing by Martinak State Park. It crosses over Watts Creek and comes to an intersection with MD 16 (Harmony Road), with that route joining MD 313 and MD 404 for a three-way concurrency.[1][2] The three routes continue southeast, narrowing into a two-lane undivided road that heads through a mix of woods and farms with some homes.[2] The road turns more to the east-southeast, with MD 313 splitting from MD 16 and MD 404 by heading south on Federalsburg Highway in Andersontown. The road turns southeast and in a short distance, MD 16 splits from MD 404 by heading east on Greenwood Road.[1][2] Past this intersection, MD 404 continues southeast through farmland and woodland to the Delaware border, where the road continues as DE 404, which runs east to an intersection with DE 1 in Five Points (near Rehoboth Beach).[2]

MD 404 is a part of the main National Highway System for its entire length except for the portion from MD 662 to US 50 in Wye Mills.[1][5]

History

By 1921, what would become MD 404 was built as a state highway within Queen Anne, from Hillsboro to a point between Hillsboro and Denton, and between West Denton and Denton.[6] The state highway between Queen Anne and Denton was completed by 1927.[7] By 1933, MD 404 was designated onto a state highway between Matapeake, where the Annapolis-Matapeake ferry across the Chesapeake Bay connected the route to Annapolis in Anne Arundel County, and the Delaware border southeast of Denton. The route headed east across Kent Island to Queenstown, where it turned southeast to Wye Mills and continued east through Queen Anne, Hillsboro, and Denton.[8] By 1946, the route's western terminus was moved to MD 2 north of Annapolis in Anne Arundel County, crossing the Chesapeake Bay on the Sandy Point-Matapeake ferry, roughly where the Chesapeake Bay Bridge is now, and continuing west through Skidmore to MD 2.[9] MD 404 was rerouted to bypass Wye Mills in 1948, with part of the former alignment through the community becoming part of MD 662.[10]

A year later, the western terminus of MD 404 was moved to MD 662 in Wye Mills. West of Wye Mills, the route was replaced by an extended US 50. The former alignment of MD 404 west of Wye Mills is now the US 50 approaches to the Chesapeake Bay Bridge, with the part between Matapeake and Stevensville now a part of MD 8.[11] In 1950, MD 404 was rerouted to bypass Queen Anne and Hillsboro to the north, with the former alignment now MD 404 Alt.[12] A portion of the route between Hillsboro and Denton was bypassed in 1960. This former alignment of MD 404 is now known as Saathoff Road and has the unsigned MD 485 designation.[13] In 1972, MD 404 and MD 313 were relocated to a one-way pair, eastbound Franklin Street and westbound Gay Street, through Denton. The routes previously headed south out of Denton on Sixth Street and Fifth Avenue. The former alignment along Sixth Street became MD 619 by 1978.[14][15] In the early 1980s, construction began to widen MD 404 to a divided highway.[16] By 1985, construction was underway for the four-lane divided bypass of Denton between MD 404 west of Denton and MD 313 north of Denton.[17] In 1987, MD 313 and MD 404 were rerouted to bypass Denton along the newly completed four-lane divided bypass. The former alignment of MD 404 through Denton became MD 404 Bus.[18] The divided highway portion of MD 404 in the Denton area was extended further in the 2000s from the south end of Denton to the Sennett Road intersection east of where MD 16 joins the route.[19] This project received $3 million from the federal government in 2001.[20]

On May 29, 2011, the Route 404 Memorial Garden, located near Denton, was dedicated, honoring those who were killed in car accidents along MD 404. The memorial consists of a flagpole surrounded by a circular path with bricks bearing the names of people who died along the route.[21]

Future

The Maryland State Highway Administration is working on improvements to MD 404 in order to provide relief to travelers driving to the ocean resorts, notably by widening the remainder of the route into a four-lane divided highway.[22] The primary motive behind the widening is the high accident rate that plagues the two-lane road, brought on by beach traffic.[23] As part of the stimulus bill signed into law by President Barack Obama on February 17, 2009, $7.7 million went to widening a portion of MD 404 east of Tuckahoe Creek in Caroline County, creating 221 jobs.[24] On May 21, 2014, groundbreaking took place to widen MD 404 between west of MD 309 and Cemetery Road. The project to widen this section of will cost a total of $39 million.[25] On June 25, 2015, Governor Larry Hogan announced that state funding would be allocated to finish widening MD 404 between US 50 and Denton, among other projects across the state.[26] A total of $160 million in funds would go to widening MD 404.[27]

Junction list

County Location mi[1] km Destinations Notes
Queen Anne's–Talbot
county line		 Wye Mills 0.00 0.00 MD 662 (Old Wye Mills Road) – Wye Oak State Park, Chesapeake College Western terminus of MD 404
1.01 1.63 US 50 (Ocean Gateway) – Easton, Bay Bridge
Queen Anne's Queen Anne 6.75 10.86 MD 309 (Starr Road) to MD 303 – Centreville, Queen Anne
6.96 11.20 MD 303 south (Main Street) MD 303 is northbound-only to eastbound MD 404
Caroline Hillsboro 7.97 12.83 MD 480 east (Ridgely Road) – Ridgely
​ 9.14 14.71
MD 404 Alt. west (Hillsboro Road) – Hillsboro		 Former MD 404
​ 9.43 15.18 MD 485 east (Saathoff Road) Former MD 404
​ 9.97 16.05 MD 485 west (Saathoff Road) Former MD 404
​ 10.25 16.50 MD 312 north (Downes Station Road) – Ridgely
West Denton 12.84 20.66 MD 404 Bus. east (Meeting House Road) – Denton Town Center Former MD 404
13.68 22.02 MD 328 (New Bridge Road) – Easton
Denton 14.67 23.61 MD 313 north (Greensboro Road) / MD 619 south (Sixth Street) – Denton, Greensboro Interchange, west end of MD 313 overlap
16.07 25.86 MD 404 Bus. west (Gay Street, Franklin Street) – Denton Former MD 404
18.26 29.39 MD 16 west (Harmony Road) to US 50 east – Harmony, Preston, American Corner West end of MD 16 overlap
Andersontown 20.54 33.06 MD 313 south (Federalsburg Highway) – Federalsburg, American Corner East end of MD 313 overlap
​ 21.43 34.49 MD 16 east (Greenwood Road) – Greenwood East end of MD 16 overlap
​ 24.61 39.61 DE 404 east (Seashore Highway) – Bridgeville, Georgetown, Rehoboth Beach Delaware state line, eastern terminus of MD 404
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Related routes

Hillsboro alternate route


Maryland Route 404 Alternate
Location: Queen Anne - Hillsboro
Length: 2.69 mi[1] (4.33 km)
MD 404 Alternate in Hillsboro

Maryland Route 404 Alternate (MD 404 Alt.) is a 2.69-mile (4.33 km) long alternate route of MD 404 in Talbot and Caroline counties. The route runs along the former alignment of MD 404 through the towns of Queen Anne and Hillsboro.[1] The route begins at an intersection with MD 309 (Cordova Road) near Queen Anne, Talbot County, where it heads east on two-lane undivided Millsboro Denton Road. West of MD 309, Old Queen Anne Road continues west to MD 404. MD 404 Alt. passes through woodland, crossing under the abandoned Chesapeake Railroad before coming to MD 303 (Lewistown Road). At this point, the route turns north to form a concurrency with MD 303 along Talbot Avenue, and the two routes enter Queen Anne as it turns to the east. MD 303 splits from MD 404 Alternate by turning north on Main Street, while MD 404 Alt. continues east past homes, intersecting MD 518 (First Street).[1][28] As the road runs a short distance to the south of the Tuckahoe Creek, there is an industrial building on the south side of the road.[28] Upon crossing the Tuckahoe Creek, MD 404 Alt. enters Hillsboro in Caroline County and becomes Hillsboro Road.[1] The route continues through residential areas of the town. Upon leaving Hillsboro, the road heads into agricultural areas with a few homes and a patch of woods.[28] MD 404 Alt. ends at an intersection with MD 404 east of Hillsboro.[1]

Junction list

County Location mi[1] km Destinations Notes
Talbot Queen Anne 0.00 0.00 MD 309 (Cordova Road) Western terminus of MD 404 Alt.
0.48 0.77 MD 303 south (Lewistown Road) West end of MD 303 overlap
0.56 0.90 MD 303 north (Main Street) East end of MD 303 overlap
0.64 1.03 MD 518 north (First Street)
Caroline ​ 2.69 4.33 MD 404 (Shore Highway) Eastern terminus of MD 404 Alt.
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Denton business loop

Maryland Route 404 Business
Location: Denton
Length: 2.32 mi[1] (3.73 km)

Maryland Route 404 Business (MD 404 Bus.) is a 2.32-mile (3.73 km) long business route of MD 404 through the town of Denton in Caroline County. The route runs along the former alignment of MD 404 that was bypassed by the divided, four-lane Denton Bypass.[1] MD 404 Bus. branches off from MD 404 west of Denton by heading southeast on a two-lane divided road called Meeting House Road that soon becomes undivided as it passes through farmland with some businesses. As it comes to MD 328 (New Bridge Road) in West Denton, the route passes near residences.[1][29] The road crosses the Choptank River into Denton, where it becomes Franklin Street. Shortly after the river, MD 404 Bus. splits into a one-way pair that follows Franklin Street eastbound and Gay Street westbound.[1] The one-way pair, which has two lanes in each direction, carries the route through the residential and commercial downtown of Denton, where it intersects MD 619 (Sixth Street). In the eastern part of Denton, the two directions of MD 404 Bus. turn south and join again, becoming a four-lane divided highway with the Franklin Street name that runs through woodland.[1][29] MD 404 Bus. ends at MD 313 and MD 404 a short distance later.[1]

Junction list
The entire route is in Caroline County.

Location mi[1] km Destinations Notes
West Denton 0.00 0.00 MD 404 (Shore Highway) to MD 313 – Bay Bridge Western terminus of MD 404 Bus.
0.76 1.22 MD 328 (New Bridge Road) – Easton
Denton 1.72 2.77 MD 619 (Sixth Street)
2.32 3.73 MD 313 / MD 404 (Shore Highway) Eastern terminus of MD 404 Bus.
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Auxiliary routes

  • MD 404C runs along Liden School Road from MD 404 northeast to MD 404D southeast of Denton in Caroline County. The route is 0.03 mi (0.048 km) long.[1][30]
  • MD 404D runs along Patten Road and Liden School Road from the beginning of state maintenance southeast to the end of state maintenance southeast of Denton in Caroline County, intersecting MD 404C. The route is 0.22 mi (0.35 km) long.[1][31]
  • MD 404K runs along West Frontage Road from MD 404P north to MD 404N in Denton, Caroline County, running to the west of MD 313/MD 404. The route is 0.31 mi (0.50 km) long.[1][32]
  • MD 404L runs along West Frontage #2 from a cul-de-sac north to MD 404P in Denton, Caroline County, running to the west of MD 313/MD 404. The route is 0.39 mi (0.63 km) long.[1][33]
  • MD 404M runs along East Frontage Road from MD 404R north to MD 313/MD 404 in Denton, Caroline County, running to the east of MD 313/MD 404. The route is 0.36 mi (0.58 km) long.[1][34]
  • MD 404N runs along Sharp Road from the beginning of state maintenance east to MD 313/MD 404 in Denton, Caroline County, intersecting MD 404K. The route is 0.05 mi (0.080 km) long.[1][35]
  • MD 404P runs along Deep Shore Road from the beginning of state maintenance at MD 404L east to MD 313/MD 404 and MD 404R in Denton, Caroline County, intersecting MD 404K. The route is 0.07 mi (0.11 km) long.[1][36]
  • MD 404R runs along Double Hills Road from the beginning of state maintenance north to MD 313/MD 404 and MD 404P in Denton, Caroline County, intersecting MD 404M. The route is 0.24 mi (0.39 km) long.[1][37]
  • MD 404S runs along West Frontage Road from a dead end east to MD 16/MD 313/MD 404 at Sennett Road southeast of Denton in Caroline County. The route is 0.09 mi (0.14 km) long.[1]
  • MD 404T runs along Service Road 9A from MD 404 north to MD 404U in Caroline County. The route is 0.09 mi (0.14 km) long and was created in 2011.[1]
  • MD 404U runs along Service Road 9B from MD 404T east to a cul-de-sac in Caroline County. The route is 0.085 mi (0.137 km) long and was created in 2011.[1]

See also

References

  1. ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.30 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  15. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  22. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  23. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  24. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  25. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  26. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  27. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  28. ↑ 28.0 28.1 28.2 Lua error in package.lua at line 80: module 'strict' not found.
  29. ↑ 29.0 29.1 Lua error in package.lua at line 80: module 'strict' not found.
  30. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  31. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  32. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  33. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  34. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  35. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  36. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  37. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".

Retrieved from "https://infogalactic.com/w/index.php?title=Maryland_Route_404&oldid=722103690"