Buran programme

From Infogalactic: the planetary knowledge core
(Redirected from Mir LII-1)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Buran-class shuttle
Буран
Buran.jpg
Orbiter K1 on launch pad 110/37 in November 1988
Function Crewed orbital launch and reentry
Manufacturer RKK Energia
Country of origin Soviet Union, later Russian Federation
Size
Mass 42,000 kg (93,000 lb)
Capacity
Payload to LEO 30,000 kg (66,000 lb)
Launch history
Status Decommissioned; programme halted in 1993; 1K1 destroyed in a 2002 hangar collapse, 1K2 in storage in Baikonur; 2K1 at Zukhovsky Airport; 2 other orbiters barely started when programme was cancelled. Test articles in various exhibitions.[1]
Launch sites Baikonur Cosmodrome
Total launches 1 (1K1)
Successes 1
Failures 0
First flight 15 November 1988[2] (1K1)
Last flight 15 November 1988[2] (1K1)
Notable payloads N/A
stage - Energia rocket
Engines 1 RD-170 (4 nozzles)
Thrust 29,000 kN (6,500,000 lbf) sea level
32,000 kN (7,200,000 lbf) vacuum
Specific impulse 309 s at sea level
338 s in vacuum
Fuel RP-1/LOX
Core stage
Engines 4 RD-0120
Thrust 5,800 kN (1,300,000 lbf) sea level
7,500 kN (1,700,000 lbf) vacuum
Specific impulse 359 s at sea level
454 s in vacuum
Burn time 480-500 s
Fuel LH2/LOX

The Buran (Russian: Бура́н, IPA: [bʊˈran], Snowstorm or Blizzard) programme, also known as the VKK Space Orbiter (Russian: Воздушно Космический Корабль, Air Space Ship) programme,[3] was a Soviet and later Russian reusable spacecraft project that began in 1974 at the Central Aerohydrodynamic Institute and was formally suspended in 1993.[4] In addition to being the designation for the whole Soviet/Russian reusable spacecraft project, Buran was also the name given to Orbiter K1, which completed one unmanned spaceflight in 1988 and remains the only Soviet reusable spacecraft to be launched into space. The Buran-class space shuttle orbiters used the expendable Energia rocket as a launch vehicle. They are generally treated as a Soviet equivalent of the United States' Space Shuttle but in the Buran project, only the airplane-shaped orbiter itself was theoretically reusable, and while Orbiter K1 was recovered successfully after its first orbital flight in 1988, it was never reused.

The Buran programme was started by the Soviet Union as a response to the United States Space Shuttle program.[5] The project was the largest and the most expensive in the history of Soviet space exploration.[4] Development work included sending BOR-5 test vehicles on multiple sub-orbital test flights, and atmospheric flights of the OK-GLI aerodynamic prototype. Buran completed one unmanned orbital spaceflight in 1988 before its cancellation in 1993.[4] Orbiter K1, which flew the test flight in 1988 was crushed in a hangar collapse on 12 May 2002 in Kazakhstan. The OK-GLI resides in Technikmuseum Speyer. Although Soviet/Russian Buran spacecraft was similar in appearance to NASA's Space Shuttle, and could similarly operate as a re-entry spaceplane, its internal and functional design was distinct. For example, the main engines during launch were on the Energia rocket and were not taken into orbit by the spacecraft. Smaller rocket engines on the craft's body provided propulsion in orbit and de-orbital burns. Thus the Buran programme matched an expendable rocket to a reusable spaceplane.

Introduction

The Buran orbital vehicle programme was developed in response to the U.S. Space Shuttle programme, which in the 1980s raised considerable concerns among the Soviet military and especially Defense Minister Dmitriy Ustinov. An authoritative chronicler of the Soviet and later Russian space programmes, the academic Boris Chertok, recounts how the programme came into being.[6][full citation needed] According to Chertok, after the U.S. developed its Space Shuttle programme, the Soviet military became suspicious that it could be used for military purposes, due to its enormous payload, several times that of previous U.S. launch vehicles. The Soviet government asked the TsNIIMash (ЦНИИМАШ, Central Institute of Machine-building, a major player in defense analysis) for an expert opinion. Institute director, Yuri Mozzhorin, recalls that for a long time the institute could not envisage a civilian payload large enough to require a vehicle of that capacity.[citation needed]

Officially, the Buran orbital vehicle was designed for the delivery to orbit and return to Earth of spacecraft, cosmonauts, and supplies. Both Chertok and Gleb Lozino-Lozinskiy (Chief Designer of RKK Energia) suggest that from the beginning, the programme was military in nature; however, the exact military capabilities, or intended capabilities, of the Buran programme remain classified. Commenting on the discontinuation of the programme in his interview to New Scientist, Russian cosmonaut Oleg Kotov confirms their accounts:

<templatestyles src="Template:Blockquote/styles.css" />

We had no civilian tasks for Buran and the military ones were no longer needed. It was originally designed as a military system for weapon delivery, maybe even nuclear weapons. The American shuttle also has military uses.[7]

Like its American counterpart, the Buran orbital vehicle, when in transit from its landing sites back to the launch complex, was transported on the back of a large jet aeroplane — the Antonov An-225 Mriya transport aircraft, which was designed in part for this task and remains the largest aircraft in the world to fly multiple times.[8][full citation needed]. Before the Mriya was ready (after the Buran had flown), the Myasishchev VM-T Atlant, a variant on the Soviet Myasishchev M-4 Molot (Hammer) bomber (NATO code: Bison), fulfilled the same role.

History of the Buran programme

Background

The Soviet reusable space-craft programme has its roots in the very beginning of the space age, the late 1950s. The idea of Soviet reusable space flight is very old, though it was neither continuous, nor consistently organized. Before Buran, no project of the programme reached production.

The idea saw its first iteration in the Burya high-altitude jet aircraft, which reached the prototype stage. Several test flights are known, before it was cancelled by order of the Central Committee. The Burya had the goal of delivering a nuclear payload, presumably to the United States, and then returning to base. The cancellation was based on a final decision to develop ICBMs. The next iteration of the idea was Zvezda from the early 1960s, which also reached a prototype stage. Decades later, another project with the same name was used as a service module for the International Space Station. After Zvezda, there was a hiatus in reusable projects until Buran.

Programme development

The development of the Buran began in the early 1970s as a response to the U.S. Space Shuttle program. Soviet officials were concerned about a perceived military threat posed by the U.S. Space Shuttle. In their opinion, the Shuttle's 30-ton payload-to-orbit capacity and, more significantly, its 15-ton payload return capacity, were a clear indication that one of its main objectives would be to place massive experimental laser weapons into orbit that could destroy enemy missiles from a distance of several thousands of kilometers. Their reasoning was that such weapons could only be effectively tested in actual space conditions and that to cut their development time and save costs it would be necessary to regularly bring them back to Earth for modifications and fine-tuning.[9] Soviet officials were also concerned that the U.S. Space Shuttle could make a sudden dive into the atmosphere to drop bombs on Moscow.[10]

Soviet engineers were initially reluctant to design a spacecraft that looked superficially identical to the Shuttle, but subsequent wind tunnel testing showed that NASA's design was already ideal.[11] Even though the Molniya Scientific Production Association proposed its Spiral programme design (halted 13 years earlier), it was rejected as being altogether dissimilar from the American shuttle design. While NPO Molniya conducted development under the lead of Gleb Lozino-Lozinskiy, the Soviet Union's Military-Industrial Commission, or VPK, was tasked with collecting all data it could on the U.S. Space Shuttle. Under the auspices of the KGB, the VPK was able to amass documentation on the American shuttle's airframe designs, design analysis software, materials, flight computer systems and propulsion systems. The KGB targeted many university research project documents and databases, including Caltech, MIT, Princeton, Stanford and others. The thoroughness of the acquisition of data was made much easier as the U.S. shuttle development was unclassified.[12]

The construction of the shuttles began in 1980, and by 1984 the first full-scale Buran was rolled out. The first suborbital test flight of a scale-model (BOR-5) took place as early as July 1983. As the project progressed, five additional scale-model flights were performed. A test vehicle was constructed with four jet engines mounted at the rear; this vehicle is usually referred to as OK-GLI, or as the "Buran aerodynamic analogue". The jets were used to take off from a normal landing strip, and once it reached a designated point, the engines were cut and OK-GLI glided back to land. This provided invaluable information about the handling characteristics of the Buran design, and significantly differed from the carrier plane/air drop method used by the United States and the Enterprise test craft. Twenty-four test flights of OK-GLI were performed after which the shuttle was "worn out". The developers considered using a couple of Mil Mi-26 helicopters to "bundle" lift the Buran, but test flights with a mock-up showed how risky and impractical that was.[13] The VM-T ferried components[14] and the Antonov An-225 Mriya (the heaviest airplane ever) was designed and used to ferry the shuttle.[15][16]

The flight and ground-testing software also required research. In 1983 the Buran developers estimated that the software development would require several thousand programmers if done with their existing methodology (in assembly language), and they appealed to Keldysh Institute of Applied Mathematics for assistance. It was decided to develop a new high-level "problem-oriented" programming language. Researchers at Keldysh developed two languages: PROL2 (used for real-time programming of onboard systems) and DIPOL (used for the ground-based test systems), as well as the development and debugging environment SAPO PROLOGUE.[17] There was also an operating system known as Prolog Manager.[18] Work on these languages continued beyond the end of the Buran project, with PROL2 being extended into SIPROL,[19] and eventually all three languages developed into DRAKON which is still in use in the Russian space industry. A declassified May 1990 CIA report citing open-source intelligence material states that the software for the Buran spacecraft was written in "the French-developed programming language known as Prolog",[20] possibly due to confusion with the name PROLOGUE.

Flight crew preparation

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Until the end of the Soviet Union in 1991, seven cosmonauts were allocated to the Buran programme and trained on the OK-GLI ("Buran aerodynamic analogue") test vehicle. All had experience as test pilots. They were: Ivan Ivanovich Bachurin, Alexei Sergeyevich Borodai, Anatoli Semyonovich Levchenko, Aleksandr Vladimirovich Shchukin, Rimantas Antanas Stankevičius, Igor Petrovich Volk and Viktor Vasiliyevich Zabolotsky.

A rule, set in place for cosmonauts because of the failed Soyuz 25 of 1977, insisted that all Soviet space missions contain at least one crew member who has been to space before. In 1982, it was decided that all Buran commanders and their back-ups would occupy the third seat on a Soyuz mission, prior to their Buran spaceflight.[9] Several people had been selected to potentially be in the first Buran crew. By 1985, it was decided that at least one of the two crew members would be a test pilot trained at the Gromov Flight Research Institute (known as "LII"), and potential crew lists were drawn up.[9] Only two potential Buran crew members reached space: Igor Volk, who flew in Soyuz T-12 to the space station Salyut 7, and Anatoli Levchenko who visited Mir, launching with Soyuz TM-4 and landing with Soyuz TM-3.[9] Both of these spaceflights lasted about a week.

Levchenko died of a brain tumour the year after his orbital flight, Bachurin left the cosmonaut corps because of medical reasons, Shchukin was assigned to the back-up crew of Soyuz TM-4 and later died in a plane crash, Stankevičius was also killed in a plane crash, while Borodai and Zabolotsky remained unassigned to a Soyuz flight until the Buran programme ended.

Spaceflight of I.P. Volk

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Igor Volk was planned to be the commander of the first manned Buran flight. There were two purposes of the Soyuz T-12 mission, one of which was to give Volk spaceflight experience. The other purpose, seen as the more important factor, was to beat the United States and have the first spacewalk by a woman.[9] At the time of the Soyuz T-12 mission the Buran programme was still a state secret. The appearance of Volk as a crew member caused some, including the British Interplanetary Society magazine Spaceflight, to ask why a test pilot was occupying a Soyuz seat usually reserved for researchers or foreign cosmonauts.[21]

Spaceflight of A.S. Levchenko

Anatoli Levchenko was planned to be the back-up commander of the first manned Buran flight, and in March 1987 he began extensive training for his Soyuz spaceflight.[9] In December 1987, he occupied the third seat aboard Soyuz TM-4 to Mir, and returned to Earth about a week later on Soyuz TM-3. His mission is sometimes called Mir LII-1, after the Gromov Flight Research Institute shorthand.[22] When Levchenko died the following year, it left the back-up crew of the first Buran mission again without spaceflight experience. A Soyuz spaceflight for another potential back-up commander was sought by the Gromov Flight Research Institute, but never occurred.[9]

Ground facilities

Maintenance, launches and landings of the Buran-class orbiters were to take place at the Baikonur Cosmodrome in the Kazakh S.S.R. Several facilities at Baikonur were adapted or newly built for these purposes:

  • Site 110 — Used for the launch of the Buran-class orbiters. Like the assembly and processing hall at Site 112, the launch complex was originally constructed for the Soviet lunar landing programme and later converted for the Energia-Buran programme.
  • Site 112 — Used for orbiter maintenance and to mate the orbiters to their Energia launchers (thus fulfilling a role similar to the VAB at KSC). The main hangar at the site, called MIK RN or MIK 112, was originally built for the assembly of the N1 moon rocket. After cancellation of the N-1 programme in 1974, the facilities at Site 112 were converted for the Energia-Buran programme. It was here that Orbiter K1 was stored after the end of the Buran programme and was destroyed when the hangar roof collapsed in 2002.[23][24]
  • Site 251 — Used as Buran orbiter landing facility, also known as Yubileyniy Airfield (and fulfilling a role similar to the SLF at KSC). It features one runway, called 06/24, which is 4,500 metres (4,900 yd) long and 84 metres (92 yd) wide, paved with "Grade 600" high quality reinforced concrete. At the edge of the runway was a special mating-demating device, designed to lift an orbiter off its Antonov An-225 Mriya carrier aircraft and load it on a transporter, which would carry the orbiter to the processing building at Site 254. A purpose-built orbiter landing control facility, housed in a large multi-storey office building, was located near the runway. Yubileyniy Airfield was also used to receive heavy transport planes carrying elements of the Energia-Buran system. After the end of the Buran programme, Site 251 was abandoned but later reopened as a commercial cargo airport. Besides serving Baikonur, Kazakh authorities also use it for passenger and charter flights from Russia.[25][26]
  • Site 254 — Built to service the Buran-class orbiters between flights (thus fulfilling a role similar to the OPF at KSC). Constructed in the 1980s as a special four-bay building, it also featured a large processing area flanked by several floors of test rooms. After cancellation of the Buran programme it was adapted for pre-launch operations of the Soyuz and Progress spacecraft.[27]

Missions

Following a series of atmospheric test flights using the jet-powered OK-GLI prototype, the first operational spacecraft (Orbiter K1) flew one test mission on 15 November 1988 at 03:00:02 UTC.[28] The spacecraft was launched unmanned from and landed at Baikonur Cosmodrome in the Kazakh S.S.R. and flew two orbits, travelling 83,707 kilometres (52,013 mi) in 3 hours and 25 minutes (0.14 flight days).[29] Buran never flew again; the programme was cancelled shortly after the dissolution of the Soviet Union.[30] In 2002, the collapse of the hangar in which it was stored destroyed the Buran orbiter.[31][32]

Atmospheric test flights

An aerodynamic testbed, OK-GLI, was constructed in 1984 to test the in-flight properties of the Buran design. Unlike the American prototype Space Shuttle Enterprise, OK-GLI had four AL-31 turbofan engines fitted, meaning it was able to fly under its own power.

Flight date Mission Shuttle Crew Duration Landing Site Notes Sources
10 November 1985 OK-GLI 2 00d 00h 12m Baikonur [33]
3 January 1986 OK-GLI 2 00d 00h 36m Baikonur
27 May 1986 OK-GLI 2 00d 00h 23m Baikonur
11 June 1986 OK-GLI 2 00d 00h 22m Baikonur
20 June 1986 OK-GLI 2 00d 00h 25m Baikonur
28 June 1986 OK-GLI 2 00d 00h 23m Baikonur
10 December 1986 OK-GLI 2 00d 00h 24m Baikonur First automatic landing
23 December 1986 OK-GLI 2 00d 00h 17m Baikonur
29 December 1986 OK-GLI 2 00d 00h 17m Baikonur
16 February 1987 OK-GLI 2 00d 00h 28m Baikonur
21 May 1987 OK-GLI 2 00d 00h 20m Baikonur
25 June 1987 OK-GLI 2 00d 00h 19m Baikonur
5 October 1987 OK-GLI 2 00d 00h 21m Baikonur
15 October 1987 OK-GLI 2 00d 00h 19m Baikonur
16 January 1988 OK-GLI 2 Baikonur
24 January 1987 OK-GLI 2 Baikonur
23 February 1988 OK-GLI 2 00d 00h 22m Baikonur
4 March 1988 OK-GLI 2 00d 00h 32m Baikonur
12 March 1988 OK-GLI 2 Baikonur
23 March 1988 OK-GLI 2 Baikonur
28 March 1988 OK-GLI 2 Baikonur
2 April 1988 OK-GLI 2 00d 00h 20m Baikonur
8 April 1988 OK-GLI 2 Baikonur
15 April 1988 OK-GLI 2 00d 00h 19m Baikonur

Orbital flight of Orbiter K1 in 1988

Launch Date Mission Orbiter Crew Duration Launch Site Landing Site Notes Sources
15 November 1988 Energia-Buran K1 Buran 0 00d 03h 0025m 110/37 Baikonur Only flight of Buran [34]

The only orbital launch of the Orbiter K1 Buran (also known as ""OK-1K1" or "Shuttle 1.01") was at 3:00 UTC on 15 November 1988 from pad 110/37 in Baikonur. The unmanned craft was lifted into orbit by the specially designed Energia booster rocket. The life support system was not installed and no software was installed on the CRT displays.[2] The shuttle orbited the Earth twice in 206 minutes of flight. On its return, it performed an automated landing on the shuttle runway at Baikonur Cosmodrome.[35]

Planned flights

The planned flights for the shuttles in 1989, before the downsizing of the project and eventual cancellation, were:[36]

  • 1991 — Orbiter K2 Ptichka unmanned first flight, duration 1–2 days.
  • 1992 — Orbiter K2 Ptichka unmanned second flight, duration 7–8 days. Orbital maneuvers and space station approach test.
  • 1993 — Orbiter K1 Buran unmanned second flight, duration 15–20 days.
  • 1994 — Orbiter K3 Baikal first manned space test flight, duration of 24 hours. Craft equipped with life-support system and with two ejection seats. Crew would consist of two cosmonauts with Igor Volk as commander, and Aleksandr Ivanchenko as flight engineer.
  • Second manned space test flight, crew would consist of two cosmonauts.
  • Third manned space test flight, crew would consist of two cosmonauts.
  • Fourth manned space test flight, crew would consist of two cosmonauts.

The planned unmanned second flight of Ptichka was changed in 1991 to the following:

  • December 1991 — Orbiter K2 Ptichka unmanned second flight, with a duration of 7–8 days. Orbital maneuvers and space station approach test:
    • automatic docking with Mir's Kristall module
    • crew transfer from Mir to the shuttle, with testing of some of its systems in the course of twenty-four hours, including the remote manipulator
    • undocking and autonomous flight in orbit
    • docking of the manned Soyuz-TM 101 with the shuttle
    • crew transfer from the Soyuz to the shuttle and onboard work in the course of twenty-four hours
    • automatic undocking and landing

Cancellation of the programme 1993

Amusement rides and Buran shuttle test vehicle OK-7M/OK-TVA at Gorky Park in Moscow.

After the first flight of a Buran shuttle, the project was suspended due to lack of funds and the political situation in the Soviet Union. The two subsequent orbiters, which were due in 1990 (informally Ptichka) and 1992 (informally Baikal) were never completed. The project was officially terminated on 30 June 1993, by President Boris Yeltsin. At the time of its cancellation, 20 billion rubles (roughly US$71,534,000)[citation needed] had been spent on the Buran programme.[37]

The programme was designed to boost national pride, carry out research, and meet technological objectives similar to those of the U.S. Space Shuttle programme, including resupply of the Mir space station, which was launched in 1986 and remained in service until 2001. When Mir was finally visited by a space shuttle, the visitor was a U.S. Shuttle, not Buran.

The Buran SO, a docking module that was to be used for rendezvous with the Mir space station, was refitted for use with the U.S. Space Shuttles during the Shuttle-Mir missions.[38]

Baikonur hangar collapse

On 12 May 2002, a hangar roof at the Baikonur Cosmodrome in Kazakhstan collapsed because of a structural failure due to poor maintenance. The collapse killed 7 workers and destroyed one of the Buran craft (Orbiter K1), as well as a mock-up of an Energia booster rocket. It was not clear to outsiders at the time which Buran programme craft was destroyed, and the BBC reported that it was just "a model" of the orbiter.[32] It occurred at the MIK RN/MIK 112 building at Site 112 of the Baikonur Cosmodrome, 14 years after the first and only Buran flight. Work on the roof had begun for a maintenance project, whose equipment is thought to have contributed to the collapse. Also, preceding 12 May there had been several days of heavy rain.[9]

Fleet status and locations

Most of the geo-location below show the shuttle bodies on the ground; in some cases Google Earth's History facility is required to see the shuttle within the dates specified.[39][40]

Name Function Location Image Geo-location Approximate dates Notes
Buran
OK-1K1
OK 1.01
GRAU index 11F35 K1
First flight article, first shuttle series Launch pad 110/37 (L) at Baikonur [1] 1988
Antonov An-225 with Buran at Le Bourget 1989 Manteufel.jpg1989
Lua error in package.lua at line 80: module 'strict' not found. Shuttle not visible; no available satellite photos. 15 November 1988 Built in 1986, only flightworthy orbiter. Launched on an unmanned, remote controlled flight; two orbits and landing (with heavy crosswinds and a self-initiated approach direction change) at Yubileiniy (Jubilee) Airport, Baikonur.
MIK building, Baikonur Cosmodrome, Kazakhstan [2] 2002 Lua error in package.lua at line 80: module 'strict' not found. Shuttle not visible; shadows. 1988 to present Housed in MIK building in area 112, Baikonur with an Energia booster mockup and other Energia hardware, destroyed in a roof collapse on 12 May 2002, which killed eight workers.
Ptichka
OK-1K2
OK 1.02
GRAU index 11F35 K2
Second flight article, first series, 95-97% complete MIK building, Baikonur Cosmodrome, Kazakhstan [3] Lua error in package.lua at line 80: module 'strict' not found. Shuttle not visible, in building. 1988 to 2002 Built in 1988, housed adjacent to the Buran.
MZK building 80, area 112a, Baikonur [4] 2014 Lua error in package.lua at line 80: module 'strict' not found. Shuttle not visible; in building. 2002 to present Moved to the MZK after the roof collapse in the MIK.
Baikal
OK-2K1
OK 2.01
GRAU index 11F35 K3
First flight article, second series, 30-50% complete Inside Tushino Plant, Moscow, Russia 1991 to 2006 Built 1991.
Car park on Kimki Reservoir, near plant. [5] 2007 Lua error in package.lua at line 80: module 'strict' not found. Need history. 2006 to 2011 Moved outdoors.
Ramenskoye Airport, near Moscow, Russia Buran 2.01 2011 in Gromov Flight Research Institute.jpg2011 on 15 August 2011 Lua error in package.lua at line 80: module 'strict' not found.; use history. 2011 to 2014, to present? An exhibit in the MAKS-2011 and later air shows. Ramenskoye Airport is the site of the Gromov Flight Research Institute, and has become a large outdoor flight museum. Other sightings:
on 15 March 2012: Lua error in package.lua at line 80: module 'strict' not found.,
on 31 July 2012 and 8 May 2013 Lua error in package.lua at line 80: module 'strict' not found.,
on 4 June and 29 July 2014 Lua error in package.lua at line 80: module 'strict' not found..
OK-2K2
OK 2.02
GRAU index 11F35 K4
Second flight article, second series, 10-20% complete. Tushino plant, Moscow, Russia [6] 1991–present Build started 1991, some pieces of 3K2, like heat tiles, have found their way onto eBay.[41]
OK-2K3
OK 2.03
GRAU index 11F35 K5
Third flight article, second series, very small amount assembled Scattered. 1988 to present All parts have been scattered and are unidentifiable.
OK-1M
OK-M
OK-ML-1
Airframe and shake test bed article Outdoor pad, area 112, Baikonur Cosmodrome, Kazakhstan [7] Lua error in package.lua at line 80: module 'strict' not found. Use history. 1988 to January, 2007 Built in 1982, deteriorated considerably outdoors on pad.
Gagarin Museum, Baikonur Cosmodrome, Kazakhstan Buran baikonur.jpg 2007 Lua error in package.lua at line 80: module 'strict' not found. January 2007 to present Refurbished in 2007, now on outdoor display.
OK-2M
OK-GLI
Atmospheric test article, two extra jet engines in rear to facilitate take-off. Ramenskoye Airport, Moscow Lua error in package.lua at line 80: module 'strict' not found. No history available this far back. 1999 Built in 1984, used in 25 test flights. On display at MAKS-1999, Russia's most prestigious airshow.
Pyrmont Island, Sydney harbor, Australia [8] 2000
Buran Space Shuttle (5449959291).jpg 2002
Lua error in package.lua at line 80: module 'strict' not found. Use history to see shelter; shuttle not visible. February 2000 to September 2000; afterwards stored nearby until 2004 Sold and sent in February 2000 to the Sydney, Australia 2000 Olympic Games. Displayed inside a light structure, stored outdoors there afterwards, for four years.
Manama harbor, Bahrain Lua error in package.lua at line 80: module 'strict' not found. Use history. July 2004 to 2007 Stored outdoors in Bahrain while the ownership of the shuttle was legally contended.
Technik Museum, Speyer, Germany[42] OK-GLI Technik Museum Speyer 2008 12.JPG 2008 Lua error in package.lua at line 80: module 'strict' not found. Shuttle not visible; in building. 2008 to present Purchased from the Russian space agency when it won the legal battle, displayed indoors.
OK-3M
OK-KS
Electrical test article. Checkout and Test Building (KIS), RKK Energia Plant, Korolev, Russia [9] Lua error in package.lua at line 80: module 'strict' not found. Not visible, in building. This is a half-scale memorial. 2006 to 15 October 2012 Built in 1982. Stored inside.
Grounds of the RKK Energia Plant Lua error in package.lua at line 80: module 'strict' not found. 15 October 2012 to present Stored outside 15 October 2012 to be placed on permanent display.[43]
OK-4M
OK-MT
OK-ML-2
Engineering mockup MZK building, Baikonur Cosmodrome, Kazakhstan [10]
[11] 2014
Lua error in package.lua at line 80: module 'strict' not found. Shuttle not visible; in building. 1988 to present Built in 1983.
OK-5M Environmental test parts from forward fuselage Unknown 1988 to present Destroyed, parts used for OK-TVA.[44]
OK-6M
OK-TVI
Environmental test article [12] NIIKhimMash rocket test area, near Moscow, Russia 1988 to present
OK-7M
OK-TVA
Structural test article Gorky Park, Moscow, Russia Moscow Gorky Park View from Frunzenskaya Embankment 05.jpg 2010 Lua error in package.lua at line 80: module 'strict' not found. Use history. 1995 to July 2014 Served as a not-as-popular-as-expected attraction, a small restaurant, and bicycle storage.
Outside Pavilion 20 about 250 meters south of the Vostok rocket, VDNKh/VVT (All-Russia Exhibition Center) Buran OK-TVA VDNKh.JPG 2014 Lua error in package.lua at line 80: module 'strict' not found. Use history. July 2014 to present Moved to VDNKh on 5 July 2014, assembled by 21 July.[45] The shuttle acquisition is part of VDNKh refurbishment.
OK-8M Components used for static thermal and vacuum tests. Outdoor display at Clinical Hospital № 83 FMBA on Orekhovy Boulevard in Moscow. Buran 8M front view.JPG 2012 Lua error in package.lua at line 80: module 'strict' not found. 2012 (at least) to present
Unnamed Wooden wind tunnel model, 1/3 scale. It no longer exists. Wind tunnel wooden model 1 3 scale of Buran is at the far corner of Zhukovsky airfield. (11137924623).jpg 2013[citation needed] Has been destroyed. Photographed at Zhukovsky Airfield.

Related test vehicles and models

Image Name Construction Date Usage Current status[46]
BOR-4S.jpg BOR-4 1982–1984 Sub-scale model of the Spiral space plane 1:2 scale model of Spiral space plane. 5 launches. NPO Molniya, Moscow.
Bor-(5).jpg BOR-5 ("Kosmos") 1983–1988 Suborbital test of 1/8 scale model of Buran 5 launches, none were reflown but at least 4 were recovered. NPO Molniya, Moscow.
Full-scale crew section Medical-biological tests
GLI Horizontal Flight Simulator Flight control software fine tuning
Wind tunnel models Scales from 1:3 to 1:550 85 models built
Gas dynamics models Scales from 1:15 to 1:2700

Possibilities for a revival of the Buran Programme

Over time, several scientists looked into trying to revive the Buran programme, especially after the Space Shuttle Columbia disaster.[47]

The 2003 grounding of the U.S. Space Shuttles caused many to wonder whether the Russian Energia launcher or Buran shuttle could be brought back into service.[48] By then, however, all of the equipment for both (including the vehicles themselves) had fallen into disrepair or been repurposed after falling into disuse with the collapse of the Soviet Union.

In 2010 the director of Moscow's Central Machine Building Institute said the Buran project would be reviewed in the hope of restarting a similar manned spacecraft design, with rocket test launches as soon as 2015.[49] Russia also continues work on the PPTS but has abandoned the Kliper program, due to differences in vision with its European partners.[50][51][52]

Due to the 2011 retirement of the American Space Shuttle and the need for STS-type craft in the meantime to complete the International Space Station, some American and Russian scientists had been mulling over plans to possibly revive the already-existing Buran shuttles in the Buran programme rather than spend money on an entirely new craft and wait for it to be fully developed[47][48] but the plans did not come to fruition.

On the 25th anniversary of the Buran flight in November 2013, Oleg Ostapenko, the new head of Roscosmos, the Russian Federal Space Agency, proposed that a new heavy lift launch vehicle be built for the Russian space program. The rocket would be intended to place a payload of 100 tonnes (220,000 lb) in a baseline low Earth orbit and is projected to be based on the Angara launch vehicle technology.[53]

Recently[when?] there have been new interests in renewing the programme temporarily while Russia struggles with the CSTS and Kliper design stages.[54]

Technical description

Specifications

The Buran orbiter ranks among the world's first spaceplanes, with the North American X-15, the Space Shuttle, SpaceShipOne, and the Boeing X-37. Of these, only the Buran and X-37 spaceflights were unmanned.
Buran's rear (1989)
Mass breakdown
  • Mass of Total Structure / Landing Systems: 42,000 kg (93,000 lb)
  • Mass of Functional Systems and Propulsion: 33,000 kg (73,000 lb)
  • Maximum Payload: 30,000 kg (66,000 lb)
  • Maximum liftoff weight: 105,000 kg (231,000 lb)
Dimensions
  • Length: 36.37 m (119.3 ft)
  • Wingspan: 23.92 m (78.5 ft)
  • Height on Gear: 16.35 m (53.6 ft)
  • Payload bay length: 18.55 m (60.9 ft)
  • Payload bay diameter: 4.65 m (15.3 ft)
  • Wing glove sweep: 78 degrees
  • Wing sweep: 45 degrees
Propulsion
  • Total orbital maneuvering engine thrust: 17,600 kgf (173,000 N; 39,000 lbf)
  • Orbital Maneuvering Engine Specific Impulse: 362 seconds (3.55 km/s)
  • Total Maneuvering Impulse: 5 kgf-sec (11 lbf-sec)
  • Total Reaction Control System Thrust: 14,866 kgf (145,790 N; 32,770 lbf)
  • Average RCS Specific Impulse: 275–295 seconds (2.70–2.89 km/s)
  • Normal Maximum Propellant Load: 14,500 kg (32,000 lb)

Unlike the US Space Shuttle, which was propelled by a combination of solid boosters and the shuttle orbiter's own liquid-fuel engines fueled from a large fuel tank, the Soviet/Russian shuttle system used thrust from the rocket's four RD-170 liquid oxygen/kerosene engines developed by Valentin Glushko and another four RD-0120 liquid oxygen/liquid hydrogen engines.[citation needed]

Buran and the US Space Shuttle

Soyuz, Space Shuttle, and Buran

Comparison to NASA's Space Shuttle

Because Buran's debut followed that of Space Shuttle Columbia's, and because there were striking visual similarities between the two shuttle systems—a state of affairs which recalled the similarity between the Tupolev Tu-144 and Concorde supersonic airliners—many speculated that Cold War espionage played a role in the development of the Soviet shuttle. Despite remarkable external similarities, many key differences existed, which suggests that, had espionage been a factor in Buran's development, it would likely have been in the form of external photography or early airframe designs. One CIA commenter states that Buran was based on a rejected NASA design.[55]

Key differences between Buran and NASA's Space Shuttle

  • Buran had no main engines, and Energia's engines were expendable. The Space Shuttle main engines were part of the orbiter, and were reused for multiple flights.
  • Energia could be configured for variety of payloads other than Buran, and was able to put up to 100 metric tons into orbit. The Space Shuttle orbiter was integral to its launch system and was the system's only payload.
  • Energia's four boosters used liquid propellant (kerosene/oxygen). The Space Shuttle's two boosters used solid propellant.[56]
  • The liquid fueled booster rockets were not constructed in segments vulnerable to leakage through O-rings, which caused the destruction of Challenger.
  • The Energia rocket was not covered in foam, the shedding of which from the large fuel tank led to the destruction of Columbia.
  • Energia's four boosters were expended after each flight, though they were intended to eventually be recoverable. The Space Shuttle's boosters were recovered and reused.
  • Buran's equivalent of the Space Shuttle Orbital Maneuvering System used GOX/LOX/Kerosene propellant, with lower toxicity and higher performance (a specific impulse of 362 seconds (3.55 km/s) using a turbopump system)[57] than the Shuttle's pressure-fed monomethylhydrazine/dinitrogen tetroxide OMS engines.
  • Buran was designed to be capable of both piloted and fully autonomous flight, including landing. The Space Shuttle was later retrofitted with automated landing capability, first flown on STS-121, but the system was intended to be used only in contingencies.[58]
  • The nose landing gear was located much farther down the fuselage rather than just under the mid-deck as with the NASA Space Shuttle.
  • Buran could lift 30 metric tons into orbit in its standard configuration, comparable to the early Space Shuttle's original 27.8 metric tons[59][60]
  • Buran included a drag chute, the Space Shuttle did not originally but was later retrofitted to include one.
  • The lift-to-drag ratio of Buran is cited as 6.5,[61] compared to a subsonic L/D of 4.5 for the Space Shuttle.[62]
  • Buran and Energia were moved to the launch pad horizontally on a rail transporter, and then erected and fueled at the launch site.[63][64][65] The Space Shuttle was transported vertically on the crawler-transporter with loaded solid boosters.[66]
  • The Buran was intended to carry a crew of up to ten, the Shuttle carried up to eight in regular operation and would have carried more only in a contingency.[60][67]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found..
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. http://www.sciencefirsthand.ru/gunko.pdf
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Chertok, Boris (2005); Rockets and People
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 Hendrickx & Vis 2007.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. http://www.russianspaceweb.com/baikonur_energia_112.html
  24. http://www.buran-energia.com/bourane-buran/bourane-fin.php
  25. http://www.russianspaceweb.com/baikonur_energia_251.html
  26. http://ourairports.com/airports/UAON/pilot-info.html
  27. http://www.russianspaceweb.com/baikonur_energia_254.html
  28. Hendrickx & Vis 2007, p. 349.
  29. Hendrickx & Vis 2007, p. 356.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Hendrickx & Vis 2007, p. 388.
  32. 32.0 32.1 Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.
  37. Lua error in package.lua at line 80: module 'strict' not found.
  38. Lua error in package.lua at line 80: module 'strict' not found.
  39. Lua error in package.lua at line 80: module 'strict' not found.
  40. Lua error in package.lua at line 80: module 'strict' not found.
  41. Lua error in package.lua at line 80: module 'strict' not found.
  42. http://speyer.technik-museum.de/en/en/spaceshuttle-buran
  43. Lua error in package.lua at line 80: module 'strict' not found.See the last line of the cronology.
  44. ru:ОК-ТВА
  45. Lua error in package.lua at line 80: module 'strict' not found.
  46. Lua error in package.lua at line 80: module 'strict' not found.
  47. 47.0 47.1 Lua error in package.lua at line 80: module 'strict' not found. Cite error: Invalid <ref> tag; name "Russian_space_program" defined multiple times with different content
  48. 48.0 48.1 Lua error in package.lua at line 80: module 'strict' not found.
  49. Lua error in package.lua at line 80: module 'strict' not found.
  50. Lua error in package.lua at line 80: module 'strict' not found.
  51. Lua error in package.lua at line 80: module 'strict' not found.
  52. Lua error in package.lua at line 80: module 'strict' not found.
  53. Lua error in package.lua at line 80: module 'strict' not found.
  54. Lua error in package.lua at line 80: module 'strict' not found.
  55. Lua error in package.lua at line 80: module 'strict' not found.
  56. Lua error in package.lua at line 80: module 'strict' not found.
  57. Lua error in package.lua at line 80: module 'strict' not found.
  58. Lua error in package.lua at line 80: module 'strict' not found.
  59. Lua error in package.lua at line 80: module 'strict' not found.
  60. 60.0 60.1 Lua error in package.lua at line 80: module 'strict' not found.
  61. Lua error in package.lua at line 80: module 'strict' not found.
  62. Lua error in package.lua at line 80: module 'strict' not found.
  63. Lua error in package.lua at line 80: module 'strict' not found.
  64. Lua error in package.lua at line 80: module 'strict' not found.
  65. Lua error in package.lua at line 80: module 'strict' not found.
  66. Lua error in package.lua at line 80: module 'strict' not found.
  67. Lua error in package.lua at line 80: module 'strict' not found.

Bibliography

  • Lua error in package.lua at line 80: module 'strict' not found.

External links