Extended real number line

From Infogalactic: the planetary knowledge core
(Redirected from Negative infinity)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

In mathematics, the affinely extended real number system is obtained from the real number system by adding two elements: + ∞ and – ∞ (read as positive infinity and negative infinity respectively). These new elements are not real numbers. It is useful in describing various limiting behaviors in calculus and mathematical analysis, especially in the theory of measure and integration. The affinely extended real number system is denoted \overline{\mathbb{R}} or [–∞, +∞] or ℝ ∪ {–∞, +∞}.

When the meaning is clear from context, the symbol +∞ is often written simply as .

Motivation

Limits

We often wish to describe the behavior of a function f(x), as either the argument x or the function value f(x) gets "very big" in some sense. For example, consider the function

f(x) = x^{-2}.

The graph of this function has a horizontal asymptote at y = 0. Geometrically, as we move farther and farther to the right along the x-axis, the value of \frac{1}{x^2} approaches 0. This limiting behavior is similar to the limit of a function at a real number, except that there is no real number to which x approaches.

By adjoining the elements +\infty and -\infty to \mathbb{R}, we allow a formulation of a "limit at infinity" with topological properties similar to those for \mathbb{R}.

To make things completely formal, the Cauchy sequences definition of \mathbb{R} allows us to define +\infty as the set of all sequences of rationals which, for any K>0, from some point on exceed K. We can define -\infty similarly.

Measure and integration

In measure theory, it is often useful to allow sets which have infinite measure and integrals whose value may be infinite.

Such measures arise naturally out of calculus. For example, in assigning a measure to \mathbb{R} that agrees with the usual length of intervals, this measure must be larger than any finite real number. Also, when considering infinite integrals, such as

\int_1^{\infty}\frac{dx}{x}

the value "infinity" arises. Finally, it is often useful to consider the limit of a sequence of functions, such as

f_n(x) = \begin{cases} 2n(1-nx), & \mbox{if } 0 \le x \le \frac{1}{n} \\ 0, & \mbox{if } \frac{1}{n} < x \le 1\end{cases}

Without allowing functions to take on infinite values, such essential results as the monotone convergence theorem and the dominated convergence theorem would not make sense.

Order and topological properties

The affinely extended real number system turns into a totally ordered set by defining -\infty\leq a \leq +\infty for all a. This order has the desirable property that every subset has a supremum and an infimum: it is a complete lattice.

This induces the order topology on \overline{\mathbb{R}}. In this topology, a set U is a neighborhood of +\infty if and only if it contains a set \{x : x > a\} for some real number a, and analogously for the neighborhoods of -\infty. \overline\mathbb R is a compact Hausdorff space homeomorphic to the unit interval [0, 1]. Thus the topology is metrizable, corresponding (for a given homeomorphism) to the ordinary metric on this interval. There is no metric which is an extension of the ordinary metric on \mathbb{R}.

With this topology the specially defined limits for x tending to +\infty and -\infty, and the specially defined concepts of limits equal to +\infty and -\infty, reduce to the general topological definitions of limits.

Arithmetic operations

The arithmetic operations of \mathbb{R} can be partially extended to \overline\mathbb{R} as follows:


\begin{align}
a + \infty = +\infty + a & = +\infty, & a & \neq -\infty \\
a - \infty = -\infty + a & = -\infty, & a & \neq +\infty \\
a \cdot (\pm\infty) = \pm\infty \cdot a & = \pm\infty, & a & \in (0, +\infty] \\
a \cdot (\pm\infty) = \pm\infty \cdot a & = \mp\infty, & a & \in [-\infty, 0) \\
\frac{a}{\pm\infty} & = 0, & a & \in \mathbb{R} \\
\frac{\pm\infty}{a} & = \pm\infty, & a & \in (0, +\infty) \\
\frac{\pm\infty}{a} & = \mp\infty, & a & \in (-\infty, 0)
\end{align}

For exponentiation, see Exponentiation#Limits of powers. Here, "a + \infty" means both "a + (+\infty)" and "a - (-\infty)", while "a - \infty" means both "a - (+\infty)" and "a + (-\infty)".

The expressions \infty - \infty, 0 \times (\pm\infty) and \pm\infty/\pm\infty (called indeterminate forms) are usually left undefined. These rules are modeled on the laws for infinite limits. However, in the context of probability or measure theory, 0 \times \pm\infty is often defined as 0.

The expression 1/0 is not defined either as +\infty or -\infty, because although it is true that whenever f(x) \to 0 for a continuous function f(x) it must be the case that 1/f(x) is eventually contained in every neighborhood of the set \{-\infty, +\infty\}, it is not true that 1/f(x) must tend to one of these points. An example is f(x) = (\sin x)/x (as x goes to infinity). (The modulus |1/f(x)|, nevertheless, does approach +\infty.)

Algebraic properties

With these definitions \overline\mathbb{R} is not a field, nor a ring, and not even a group or semigroup. However, it still has several convenient properties:

  • a + (b + c) and (a + b) + c are either equal or both undefined.
  • a + b and b + a are either equal or both undefined.
  • a \times (b \times c) and (a \times b) \times c are either equal or both undefined.
  • a \times b and b \times a are either equal or both undefined
  • a \times (b + c) and (a \times b) + (a \times c) are equal if both are defined.
  • If a \leq b and if both a + c and b + c are defined, then a + c \leq b + c.
  • If a \leq b and c > 0 and if both a \times c and b \times c are defined, then a \times c \leq b \times c.

In general, all laws of arithmetic are valid in \overline\mathbb{R} as long as all occurring expressions are defined.

Miscellaneous

Several functions can be continuously extended to \overline\mathbb{R} by taking limits. For instance, one defines \exp(-\infty) = 0, \exp(+\infty) = +\infty, \ln(0) = -\infty, \ln(+\infty) = +\infty etc.

Some discontinuities may additionally be removed. For example, the function 1/x^2 can be made continuous (under some definitions of continuity) by setting the value to +\infty for x = 0, and 0 for x = +\infty and x = -\infty. The function 1/x can not be made continuous because the function approaches -\infty as x approaches 0 from below, and +\infty as x approaches 0 from above.

Compare the real projective line, which does not distinguish between +\infty and -\infty. As a result, on one hand a function may have limit \infty on the real projective line, while in the affinely extended real number system only the absolute value of the function has a limit, e.g. in the case of the function 1/x at x = 0. On the other hand

\lim_{x \to -\infty}{f(x)} and \lim_{x \to +\infty}{f(x)}

correspond on the real projective line to only a limit from the right and one from the left, respectively, with the full limit only existing when the two are equal. Thus e^x and \arctan(x) cannot be made continuous at x = \infty on the real projective line.

See also

References