Oklahoma State Highway 325

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

State Highway 325 marker

State Highway 325
290x172px
Route information
Maintained by ODOT
Length: 38.08 mi[1] (61.28 km)
Major junctions
West end: NM 456 at the New Mexico state line
East end: US 56.svgUS 64.svgUS 385.svgUS 412.svgOklahoma State Highway 3.svg US-56/US-64/US-385/US-412/SH-3 in Boise City
Highway system
US-287 US-377

State Highway 325, officially, SH-325, is a state highway in the U.S. state of Oklahoma.

SH-325 runs for 38.08 miles (61.28 km) through Cimarron County, Oklahoma, from the New Mexico border west of Kenton to the traffic circle in Boise City. Along the way it provides access to Black Mesa State Park, near Black Mesa Mountain, the highest point in the state of Oklahoma.

Route description

SH-325 begins at the tip of the Oklahoma Panhandle, where NM 456 crosses into Oklahoma from Union County, New Mexico. Just east of the state line, the highway bridges Carrizozo Creek, just upstream of where it empties into the Cimarron River.[2] Just east of the state line, SH-325 passes through the town of Kenton. Further east of Kenton, the highway crosses over Tesesquite Creek and South Carrizo Creek, both tributaries of the Cimarron River. After crossing South Carrizo Creek, the road gradually curves onto a south–north alignment.[2]

SH-325 heads south for about 12 miles (19 km), crossing the intermittent Cold Springs Creek. The road then turns east. The remainder of the route is a mostly flat, straight shot into Boise City, with a minor curve to the west of town where it crosses a railroad track. The route ends at the traffic circle surrounding the Cimarron County Courthouse in downtown Boise City.[2]

History

The road between Kenton and Boise City that is now SH-325 has carried a bevy of designations, and has been intermittently included and excluded from the state highway system over the years. The road was first numbered as a state route in 1926, when the original SH-11 was extended west from its original terminus in Boise City. At the same time, the U.S. route system was being introduced to Oklahoma, and under this new system, the highway received the additional designation as US-64.[3] On the 1928 official state map, this portion of highway is marked as "Not maintained", though the route continued to carry both highway designations.[4]

By 1930, the road was once again state-maintained, and the old SH-11 designation had been done away with as the U.S. route system established itself and superseded the now-redundant state highway numbers that it replaced.[5] US-64, using the Kenton route, would continue to serve as the only state highway connection to New Mexico until the middle of the century.

On July 7, 1947, US-64 was shifted onto a new road that had opened, extending southwest from Boise City and crossing into New Mexico near the southwest corner of the Panhandle.[6] This left the route to Kenton without a designation, which it would lack for the rest of the 1940s, the 1950s, and most of the 1960s.

Kenton was briefly reconnected to the state highway system when State Highway 134 was designated along the old alignment of US-64. This highway was only shown on the 1963 state highway map, implying that it was commissioned the year before and revoked sometime that year. By the time SH-134 was designated, the highway had been fully paved.[7] When SH-134 was decommissioned, its alignment continued to persist on the state highway map, with the legend "(not on highway system)" and no shields.[8]

The old US-64 route to Kenton finally received its present-day designation in 1973, when it was numbered after the already-existing NM 325, which once extended to the Oklahoma state line.[9]

Junction list

County Location mi[1] km Destinations Notes
New Mexico–Oklahoma state line 0.00 0.00 NM 456 continues west into New Mexico
Cimarron Boise City 38.08 61.28 US-56 / US-64 / US-385 / US-412 / SH-3 Eastern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".