Plasma-powered cannon

For a gun which fires only plasma and not a solid projectile, see plasma rifle.

A plasma cannon (also called an electrothermal accelerator) is an experimental projectile weapon, which accelerates a projectile by means of a plasma discharge between electrodes at the rear of the barrel, generating a rapid increase in pressure. It functions similarly to other type of firearm, except that it uses a plasma discharge instead of a chemical propellant (e.g. black powder or nitrocellulose).

Design

To generate the energy required to make a plasma discharge, a high current, high voltage source and a large capacitor bank are used. Both are attached in series to the electrode system in the cannon's barrel. The capacitor is loaded with as high a voltage as possible. However, a militarily useful energy is achieved with as little as several kilojoules. The capacitor is then discharged. The gap between the electrodes ionizes, turning the non-flammable propellant medium into a superheated conductive plasma. Associated volumetric expansion propels the projectile from the barrel at high velocity.

Advantages and disadvantages

The advantage of a plasma cannon is that it uses electricity as energy source. The more energy is supplied the faster the gases expand and the faster the projectile is accelerated. This makes it possible to "dial in" any velocity desired and allows the projectile to reach speeds at which it would "outrun" the burn rate of a conventional propellant.

A clear disadvantage of the plasma cannon is its weight. Even a small plasma cannon with only the firepower of an air gun weighs about 20 kg (without current supply). A foot soldier thus could not carry a plasma cannon powerful enough to be useful. It would have to be mounted in a stationary position or on a vehicle.

Literature

• Günter Wahl: Blitz und Donner selbst erzeugt (in German)

See also

• Electrothermal-chemical technology