Potassium ferricyanide

Potassium ferricyanide

200px
200px
Names
IUPAC name Potassium hexacyanoferrate(III)
Other names Red prussiate of Potash, Prussian red, Potassium ferricyanide
Identifiers
CAS Number	13746-66-2 Y
ChemSpider	24458 N
Jmol 3D model	Interactive image
PubChem	26250
RTECS number	LJ8225000
InChI InChI=1S/6CN.Fe.3K/c6*1-2;;;;/q6*-1;+3;3*+1 N Key: BYGOPQKDHGXNCD-UHFFFAOYSA-N N InChI=1S/6CN.Fe.3K/c6*1-2;;;;/q6*-1;+3;3*+1 Key: BYGOPQKDHGXNCD-UHFFFAOYAG
SMILES [C-]#N.[C-]#N.[C-]#N.[C-]#N.[C-]#N.[C-]#N.[K+].[K+].[K+].[Fe+3]
Properties
Chemical formula	C6N6FeK3
Molar mass	329.24 g/mol
Appearance	deep red crystals, sometimes small pellets, orange to dark red powder
Density	1.89 g/cm3, solid
Melting point	300 °C (572 °F; 573 K)
Boiling point	decomposes
Solubility in water	330 g/L ("cold water") 464 g/L (20 °C) 775 g/L ("hot water")
Solubility	slightly soluble in alcohol soluble in acid soluble in water
Structure
Crystal structure	monoclinic
Coordination geometry	octahedral at Fe
Vapor pressure	{{{value}}}
Related compounds
Other anions	Potassium ferrocyanide
Other cations	Prussian blue
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Potassium ferricyanide is the chemical compound with the formula K₃[Fe(CN)₆]. This bright red salt contains the octahedrally coordinated [Fe(CN)₆]³⁻ ion. It is soluble in water and its solution shows some green-yellow fluorescence.

Preparation

Potassium ferricyanide is manufactured by passing chlorine through a solution of potassium ferrocyanide. Potassium ferricyanide separates from the solution:

2 K₄[Fe(CN)₆] + Cl₂ → 2 K₃[Fe(CN)₆] + 2 KCl

Structure

Like other metal cyanides, solid potassium ferricyanide has a complicated polymeric structure. The polymer consists of octahedral [Fe(CN)₆]^3- centers crosslinked with K⁺ ions that are bound to the CN ligands. The K⁺---NCFe linkages break when the solid is dissolved in water.

Applications

In the 19th century, it was used for reading palimpsests and old manuscripts.

The compound has widespread use in blueprint drawing and in photography (Cyanotype process). Several photographic print toning processes involve the use of potassium ferricyanide. Potassium ferricyanide is used as an oxidizing agent to remove silver from negatives and positives, a process called dot etching. In color photography, potassium ferricyanide is used to reduce the size of color dots without reducing their number, as a kind of manual color correction. The compound is also used to harden iron and steel, in electroplating, dyeing wool, as a laboratory reagent, and as a mild oxidizing agent in organic chemistry.

It is also used in black-and-white photography with sodium thiosulfate (hypo) to reduce the density of a negative or gelatin silver print where the mixture is known as Farmer's reducer; this can help offset problems from overexposure of the negative, or brighten the highlights in the print.

Potassium ferricyanide is also one of two compounds present in ferroxyl indicator solution (along with phenolphthalein) which turns blue (Prussian blue) in the presence of Fe²⁺ ions, and which can therefore be used to detect metal oxidation that will lead to rust. It is possible to calculate the number of moles of Fe²⁺ ions by using a colorimeter, because of the very intense color of Prussian blue Fe₄[Fe(CN)₆]₃.

Potassium ferricyanide is often used in physiology experiments as a means of increasing a solution's redox potential (E°' ~ 436 mV at pH 7). As such, it can oxidize reduced cytochrome c (E°' ~ 247 mV at pH 7) in intact isolated mitochondria. Sodium dithionite is usually used as a reducing chemical in such experiments (E°' ~ −420 mV at pH 7).

Potassium ferricyanide is used in many amperometric biosensors as an electron transfer agent replacing an enzyme's natural electron transfer agent such as oxygen as with the enzyme glucose oxidase. It is used as this ingredient in many commercially available blood glucose meters for use by diabetics.

Potassium ferricyanide is combined with potassium hydroxide (or sodium hydroxide as a substitute) and water to formulate Murakami's etchant. This etchant is used by metallographers to provide contrast between binder and carbide phases in cemented carbides.

Prussian blue

Prussian blue, the deep blue pigment in blue printing, is generated by the reaction of K₃[Fe(CN)₆] with ferrous (Fe²⁺) ions as well as K₄[Fe(CN)₆] with ferric salts.

In histology, potassium ferricyanide is used to detect ferrous iron in biological tissue. Potassium ferricyanide reacts with ferrous iron in acidic solution to produce the insoluble blue pigment, commonly referred to as Turnbull's blue or Prussian blue. To detect ferric (Fe³⁺) iron, potassium ferrocyanide is used instead in the Perls' Prussian blue staining method. The material formed in the Turnbull's blue reaction and the compound formed in the Prussian blue reaction are the same.

Safety

Potassium ferricyanide has low toxicity, its main hazard being that it is a mild irritant to the eyes and skin. However, under very strongly acidic conditions, highly toxic hydrogen cyanide gas is evolved, according to the equation:

6 H⁺ + [Fe(CN)₆]³⁻ → 6 HCN + Fe³⁺

The reaction with hydrochloric acid is as follows:

6 HCl + K₃[Fe(CN)₆] → 6 HCN + FeCl₃ + 3 KCl

See also

• Ferricyanide
• Ferrocyanide
• Potassium ferrocyanide

External links

• International Chemical Safety Card 1132
• National Pollutant Inventory – Cyanide compounds fact sheet