QBlade
 |
|
A screenshot of QBlade
|
|
| Original author(s) | TU Berlin |
|---|---|
| Developer(s) | Open Source Community |
| Stable release | 0.91 / August 25, 2015 |
| Operating system | Linux, Windows |
| Available in | English |
| Type | Wind energy software |
| License | GPL |
| Website | http://q-blade.org/ & http://sourceforge.net/projects/qblade/ |
QBlade is an open source, cross-platform simulation software for wind turbine blade design and aerodynamic simulation. It comes with a user friendly graphical user interface (GUI) based on Qt.
Contents
Overview
QBlade is an open source wind turbine calculation software, distributed under the GNU General Public License. The software is seamlessly integrated into XFOIL, an airfoil design and analysis tool. The purpose of this software is the design and aerodynamic simulation of wind turbine blades. The integration in XFOIL allows for the user to rapidly design custom airfoils and compute their performance curves, Extrapolating the performance data to a range of 360°Angle of attack, and directly integrate them into a wind turbine rotor simulation. The integration of QBlade into XFLR's sophisticated graphical user interface makes this software accessible to a large potential user community.
QBlade is especially adequate for teaching, as it provides a ’hands-on’ feeling for HAWT rotor design and shows all the fundamental relationships between blade twist, blade chord, section airfoil performance, turbine control, power and load curves in an easy and intuitive way. QBlade also includes post processing of conducted rotor simulations and gives deep insight into all relevant blade and rotor variables.
Development History
QBlade's development started in 2009 as a small part of the PhD work of G. Pechlivanoglou at the Hermann Föttinger Institute of TU Berlin. The initial development was done by D. Marten, at the time an undergraduate student of Physical Engineering. Prof. C.O. Paschereit, head of the Hermann Föttinger Institute was a strong proponent of the idea to release QBlade under GPL and thus the software was quickly hosted on the official site of the institute. The 1st online version was received with positive remarks which led to the continuation of the development. G. Weinzierl, undergraduate student at the time initiated the development of an integrated turbulent wind field generator, while J. Wendler under the supervision of D. Marten developed the VAWT module as well as the Viterna 360° extrapolation module. M. Lennie, performed the development of a structural Euler-Bernoulli beam module (QFEM). N. Moesus further developed and integrated the code of G. Weinzierl and M. Lennie in the QBlade code. Furthermore, he initiated the integration of a fully developed (GUI) for the aeroelastic code FAST inside QBlade. The completion of the integration of all the aforementioned modules in QBlade is handled by J.Wendler, N. Moesus and D. Marten and the updated version (v0.8) of the software was released on the 9th of May 2014.
An updated stable version was released in August 2015. This included a new aerodynamic module which replaced the BEM of QBlade with a new advanced Lifting Line Theory (LLT) module. Furthermore, a Free Wake Vortex model was implemented for the accurate representation of the near and far wake of the turbine. The entire development of this version was undertaken by D. Marten.
Current development focuses on the expansion of both the dynamic and the aerodynamic capabilities of the software as well as its export/import interface. D. Marten is the person mainly responsible for the development and supervision of future versions while G. Pechlivanoglou, J. Saverin, N. Moesus and J. Wendler are currently active in the project.
Functionality
The functionality of QBlade includes the following features:
- Extrapolation of XFOIL generated or imported polar data to 360° Angle of attack.
- Blade design and optimization, including 3D visualization, using XFOIL generated or imported airfoil.
- Wind turbine definition (rotor blade, turbine control, generator type, losses...).
- Computation of rotor performance over Tip speed ratio (tip speed ratio) range.
- Multi parameter rotor simulations.
- Turbulent inflow field generator according to the model of Veers.[1]
- Integration of aeroelastic code AeroDyn/FAST of the National Renewable Energy Laboratory (NREL).[2][3]
- Computation of turbine performance over a wind speed range.
- Annual energy yield computation based on a Weibull distribution of wind speeds.
- Manual selection of Blade element theory correction algorithms.
- Access to all simulation parameters for flexible use.
- Data post processing and visualization (dynamic graphs).
- Export functionality for all simulation data.
- Blade geometry export functionality.
- Storing of projects, rotors, turbines and simulations in a runtime database.
- Lifting Line Theory (LLT) aerodynamic module
- Free Wake Vortex Model
- Multi-thread capability
- Advanced project & blade import and export functionality
- Integration of sample test projects including the popular NREL 5MW blade design
License
QBlade is distributed under the GPL license. It is maintained and continuously developed by the Hermann Föttinger Institute of TU Berlin (Chair of Fluid Dynamics).
Validation
QBlade has been successfully validated against the WT_Perf Blade Element Momentum Theory code of NWTC. Furthermore, it showed good agreement with the experimental performance data measured at the NASA Ames Research Center wind tunnel during the National Renewable Energy Laboratory 10m Wind Turbine Testing campaign[4]
See also
References
- ↑ [1]
- ↑ GL Wind Certificate No. ZZ 001A-2005
- ↑ NWTC Design Codes
- ↑ [2], NREL 10-m Wind Turbine Testing in NASA Ames 80'x120' Wind Tunnel.
Further reading
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
External links
 |
Wikimedia Commons has media related to Lua error in package.lua at line 80: module 'strict' not found.. |
