Rideau Canal

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Rideau Canal
Native names
English: Rideau Canal
French: Canal Rideau
Rideau Canal.jpg
Locks in summer
Area Ontario
Built 1832
Architect John By
Governing body Parks Canada
Type Cultural
Criteria i, iv
Designated 2007 (31st session)
Reference no. 1221
State Party  Canada
Region Europe and North America
Designated 1925
Canadian Heritage River 2000

The Rideau Canal, also known unofficially as the Rideau Waterway, connects the city of Ottawa, Ontario, Canada, on the Ottawa River to the city of Kingston, Ontario, on Lake Ontario. It is 202 kilometres in length.[1] The name Rideau, French for "curtain," is derived from the curtain-like appearance of the Rideau River's twin waterfalls where they join the Ottawa River.[2] The canal system uses sections of two rivers, the Rideau and the Cataraqui, as well as several lakes. The Rideau Canal is operated by Parks Canada.

The canal was opened in 1832 as a precaution in case of war with the United States. It remains in use today primarily for pleasure boating, with most of its original structures intact, operated by Parks Canada. The locks on the system open for navigation in mid-May and close in mid-October.[3][4] It is the oldest continuously operated canal system in North America, and in 2007 it was registered as a UNESCO World Heritage Site.[5]

History

An engraving of the Rideau Canal locks at Bytown

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The construction of the Rideau Canal was a preventive military measure undertaken after a report that during the War of 1812 the United States had intended to invade the British colony of Upper Canada via the St. Lawrence River, which would have severed the lifeline between Montreal and Kingston.[6] The British built a number of other canals (Grenville, Chute-à-Blondeau and Carillon Canals, all along the Ottawa River) as well as a number of forts (Citadel Hill, La Citadelle, and Fort Henry) to impede and deter any future American invasions of Canadian territory.

The initial purpose of the Rideau Canal was military, as it was intended to provide a secure supply and communications route between Montreal and the British naval base in Kingston. Westward from Montreal, travel would proceed along the Ottawa River to Bytown (now Ottawa), then southwest via the canal to Kingston and out into Lake Ontario. The objective was to bypass the stretch of the St. Lawrence bordering New York; a route which would have left British supply ships vulnerable to an attack or a blockade of the St. Lawrence.

1845 painting of the canal and Lower Town by Thomas Burrowes

The canal also served a commercial purpose. The Rideau Canal was easier to navigate than the St. Lawrence River because of the series of rapids between Montreal and Kingston. As a result, the Rideau Canal became a busy commercial artery from Montreal to the Great Lakes. However, by 1849, the rapids of the St. Lawrence had been tamed by a series of locks, and commercial shippers were quick to switch to this more direct route.[7]

The construction of the canal was supervised by Lieutenant-Colonel John By of the Royal Engineers. Private contractors such as future sugar refining entrepreneur John Redpath, Thomas McKay, Robert Drummond, Thomas Phillips, Andrew White[8] and others were responsible for much of the construction, and the majority of the actual work was done by thousands of Irish and French-Canadian labourers. Colonel John By decided to create a slackwater canal system[9] instead of constructing new channels. This was a better approach as it required fewer workers, was more cost efficient, and would have been easier to build.[10]

The lock at Lower Brewers nearing completion in 1831 by Thomas Burrowes

The canal work started in 1826, and it took six years to complete by 1832. The final cost of its construction was £822,000. Given the unexpected cost overruns, John By was recalled to London and was retired with no accolades or recognition for the tremendous accomplishment he'd achieved.

Once the canal was constructed, no further military engagements took place between Canada and the United States. Although the Rideau Canal never had to be used as a military supply route, it played a pivotal role in the early development of Canada. Prior to the locks being completed on the St. Lawrence in the late 1840s, the Rideau served as the main travel route for immigrants heading westward into Upper Canada and for heavy goods (timber, minerals, grain) from Canada's hinterland heading east to Montreal. Tens of thousands of British immigrants travelled the Rideau in this period. Hundreds of barge loads of goods were shipped each year along the Rideau, allowing Montreal to compete commercially in the 1830s and 40s with New York (which had the Erie Canal) as a major North American port.

Brewer's Lower Mill - view down the Cataraqui Creek and clearing made for the Rideau Canal, 1829 by Thomas Burrowes

Construction deaths

As many as one thousand of the workers died from malaria,[11] other diseases and accidents. Most deaths were from disease, principally complications from malaria (P. vivax), which was endemic in Ontario within the range of the Anopheles mosquito, and other diseases of the day. Accidents were fairly rare for a project of this magnitude; in 1827 there were 7 accidental deaths recorded.[12] Inquests were held for each accidental death. The men, women and children who died were buried in local cemeteries, either burial grounds set up near work sites or existing local cemeteries. Funerals were held for the workers and the graves marked with wooden markers (which have since rotted away—leading to a misconception that workers were buried in unmarked graves).[12]

View on the Cataraqui Creek, Brewer's Upper Mills in the background, 1830 by Thomas Burrowes

Some of the dead remain unidentified as they had no known relatives in Upper Canada. Memorials have been erected along the canal route, most recently the Celtic Cross memorials in Ottawa, Kingston and Chaffeys Lock.[13] The first memorial on the Rideau Canal acknowledging deaths among the labour force was erected in 1993 by the Kingston and District Labour Council and the Ontario Heritage Foundation at Kingston Mills.

Three canal era cemeteries are open to the public today: Chaffey's Cemetery and Memory Wall at Chaffey's Lock—this cemetery was used from 1825 to the late 19th century; the Old Presbyterian Cemetery near Newboro—used from 1828 to the 1940s; and McGuigan Cemetery near Merrickville—used from the early 19th century (c. 1805) to the late 1890s.

Recognition

In 1925 the Rideau Canal was designated a National Historic Site of Canada (plaqued in 1926 and again in 1962).[14]

On 17 June 1998 Canada Post issued 'Rideau Canal, Summer Boating at Jones Falls' [15] and 'Rideau Canal, Winter Skating by Parliament' [16] as part of the Canals, Recreational destinations series. The stamps were designed by Carey George and Dean Martin, based on paintings by Vincent McIndoe. The 45¢ stamps are perforated 12.5 and were printed by Ashton-Potter Canada Limited.

Looking up from the bottom of the Ottawa Lockstation of the Rideau Canal. Chateau Laurier in Center rear.
Rideau Canal Locks looking down towards the Ottawa River from Wellington street

In 2000 the Rideau Waterway was designated a Canadian Heritage River in recognition of its outstanding historical and recreational values.[14]

In 2007 it was inscribed as a UNESCO World Heritage Site recognizing it as a work of human creative genius. The Rideau Canal was recognized as the best preserved example of a slack water canal in North America demonstrating the use of European slackwater technology in North America on a large scale. It is the only canal dating from the great North American canal-building era of the early 19th century that remains operational along its original line with most of its original structures intact. It was also recognized as an extensive, well preserved and significant example of a canal which was used for military purposes linked to a significant stage in human history - that of the fight to control the north of the American continent.[14]

A plaque was erected by the Ontario Archaeological and Historic Sites Board at Jones Falls Lockstation commemorating Lieutenant Colonel John By, Royal Engineer, the superintending engineer in charge of the construction of the Rideau Canal. The plaque notes that the 123-mile long Rideau Canal, built as a military route and incorporating 47 locks, 16 lakes, two rivers, and a 360-foot-long (110 m), 60-foot-high (18 m) dam at Jones Falls (Jones Falls Dam), was completed in 1832.

Waterway

Rideau Canal map
Lock Nº
MP (km)
Ottawa River
Rideau Falls
Sussex Drive
1-8
0.0
Ottawa
Plaza Bridge, Rideau Street
Mackenzie King Bridge
Laurier Avenue Bridge
Corktown Footbridge
Ontario 417.svg Highway 417
Pretoria Bridge
Bank Street Bridge
Bronson Avenue
Dow's Lake
9-10
6.7
Hartwells
11-12
8.4
Hog's Back | Hog's Back Falls
Hog's Back Bridge
Rideau River
Mooney's Bay
13
15.0
Black Rapids
14-16
23.3
Long Island
Long Island
Ontario 416.svg Highway 416
17
64.0
Burritts Rapids
Burritts Rapids
18
69.4
Lower Nicholsons
19
69.7
Upper Nicholsons
Upper Nicholsons
20
70.5
Clowes
21-23
73.8
Merrickville
County Road 43
24
86.7
Kilmarnock
Kilmarnock
25
92.7
Edmonds
26-27
95.4
Old Slys
Old Slys
x18px Highway 15
Rideau Canal Museum
29a
96.8
Smiths Falls Combined
(formerly Locks 28-30)
Abbot St
31
97.4
Smiths Falls Detached
32
101.1
Poonamalie
Lower Rideau Lake
 
107.5
Tay Canal
33
 
Lower Beveridges
34
 
Upper Beveridges
Big Rideau Lake
 
126.8
Colonel By Island
35
132.4
Narrows
The Narrows
Upper Rideau Lake
Rideau River
Cataraqui River
County Road 42
36
140.8
Newboro Lock
Newboro Lake
 
146.0
Ferry (cable)
37
148.7
Chaffeys
Chaffeys
Opinicon Lake
38
152.0
Davis
Sand Lake
39-42
159.0
Jones Falls
Whitefish Lake
Brass Point
Cranberry Lake
43-44
176.5
Upper Brewers
Lower Brewers
45
179.3
Lower Brewers
Kingston Mills
46-49
195.2
Kingston Mills
Ontario 401.svg Highway 401
La Salle Causeway / x18px Highway 2
Lake Ontario

The 202 kilometres (126 mi) of the Rideau Canal incorporate sections of the Rideau and Cataraqui rivers, as well as several lakes, including the Lower, Upper and Big Rideau lakes. About 19 km (12 mi) of the route is man-made. Communities along the waterway include Ottawa, Manotick, Kars, Burritts Rapids, Merrickville, Smiths Falls, Rideau Ferry, Portland, Westport, Newboro, Seeleys Bay and Kingston. Communities connected by navigable waterways to the Rideau Canal include Kemptville and Perth.

Today, only pleasure craft make use of the Rideau Canal. It takes approximately 3–5 days to travel one way through the Rideau Canal system by motor boat.[17] Boat tours of the canal are offered in Ottawa, Kingston, Merrickville, and Chaffeys Lock. A cruise line operates the ship Kawartha Voyageur.[18] Recreational boaters can make use of it to travel between Ottawa and Kingston. Most of the locks are still hand-operated. A total of 45 locks at 23 stations are located along the canal, plus two locks (locks 33 and 34) at the entrance to the Tay Canal (leading to Perth).[19] Furthermore, there are four blockhouses and some of the original 16 defensible lockmasters residences along the waterway. The waterway is home to many species of birds, reptiles, amphibians, mammals and fish.[20]

In 1973–74 a new Smiths Falls Combined Lock, 29a, was built a few dozen metres to the north of the original flight of 3 locks (locks 28–30). The original locks were bypassed but left in place.

In normal operations the canal can handle boats up to 27.4 m (90 ft) in length, 7.9 m (26 ft) in width, and 6.7 m (22 ft) in height with a draft of up to 1.5 m (4 ft 11 in) (boats drafting over 1.2 m (3 ft 11 in) are asked to contact the Rideau Canal Office of Parks Canada prior to their trip). In special circumstances a boat up to 33.5 m (110 ft) in length by 9.1 m (30 ft) in width can be handled.

Locks

The Rideau Canal uses a lock system that is still fully functioning.[17] The gates that let boats travel in and out of the locks last approximately 12–15 years.[21] When the canal was originally constructed, the gates would be made at the lock sites by carpenters and blacksmiths.[21] Today they are made in Smiths Falls, Ontario, and sometimes take up to 2 months to build 1 set of gates.[21] The gates used on the Rideau Canal are made of Douglas Fir and are mitre-shaped to ensure a tight seal due to water pressure.[22] The average Rideau Canal lock lift uses 1.3 million litres of water.[22]

Blockhouses

Skateway

The Rideau Canal Skateway, with the Chateau Laurier in the background.

In winter, a section of the Rideau Canal passing through central Ottawa becomes officially the world's largest skating rink.[23] The cleared length is 7.8 kilometres (4.8 mi) and has the equivalent surface area of 90 Olympic ice hockey rinks. It runs from the Hartwell locks at Carleton University to the locks between the Parliament Buildings and the Château Laurier, including Dow's Lake in between. It serves as a popular tourist attraction and recreational area and is also the focus of the Winterlude festival in Ottawa. Beaver Tails, a fried dough pastry, are sold along with other snacks and beverages, in kiosks on the skateway. In January 2008, Winnipeg, Manitoba, achieved the record of the world's longest skating rink at a length of 8.54 kilometres but with a width of only 2 to 3 metres wide[23] on its Assiniboine River and Red River at The Forks. In response, the Rideau Canal was rebranded as "the world's largest skating rink". The Rideau Canal Skateway was added to the Guinness Book of World Records in 2005 for being the largest naturally frozen ice rink in the world.[24]

The Skateway is open 24 hours a day. The length of the season depends on the weather, but typically the Rideau Canal Skateway opens in January and closes in March.[25] In 1971–1972, the skating season was 90 days long, which is the longest season so far.[26] 2001–2002 was the shortest Rideau Canal Skateway season, being a mere 35 days long.[26]

2014–2015 Season: January 10, 2015 to March 9, 2015
2013–2014 Season: December 31 to March 11, 2014
2012–2013 Season: January 8 to February 28, 2013
2011–2012 Season: January 13 to February 21, 2012
2010–2011 Season: January 8 to March 5, 2011
2009–2010 Season: January 14 to February 26, 2010
2008–2009 Season: January 1 to March 5, 2009
2007–2008 Season: January 25 to March 5, 2008
2006–2007 Season: January 26 to March 12, 2007
2005–2006 Season: January 7 to March 10, 2006

Although some residents of Ottawa had been using the canal as an impromptu skating surface for years, the official use of the canal as a skateway and tourist attraction is a more recent innovation. As recently as the 1970s, the city government of Ottawa considered paving over the canal to make an expressway.[27] The federal government's ownership of the canal, however, prevented the city from pursuing this proposal. When Doug Fullerton was appointed chair of the National Capital Commission, he proposed a recreational corridor around the canal, including the winter skateway between Carleton University and Confederation Park. The plan was implemented on January 18, 1971, despite opposition by city council. A small section of ice near the National Arts Centre was cleared by NCC employees with brooms and shovels,[24] and 50,000 people skated on the canal the first weekend.[27] Today the skating area of the canal is larger because of the equipment available for ice resurfacing and 24/7 maintenance crews. The skateway now has an average of one million visits per year.[24] City councillor and author Clive Doucet credits this transformation of the canal with reinvigorating the communities of the Glebe, Old Ottawa East and Old Ottawa South.[27]

An ice hockey game on the canal on Christmas Day, 1901

Making and maintaining the Rideau Canal Skateway

The preparation for the Skateway starts as early as mid-October.[28] At the end of the boating season, the water is drained at the Ottawa locks near Parliament by Parks Canada.[28] Facilities on the ice such as shelters, chalets, and access ramps for vehicles are then installed.[28] Next, “beams are placed at the locks, and the water is raised to skating level.”[28] After this step, the essentials are added such as stairs to access the ice, and hookups for both plumbing and electricity.[28] When the water cools naturally in the winter, the water level begins to lower.[24] When the water begins to turn to ice, the ice crystals rise to the surface as their density is lower than that of water.[24] This forms an ice cap that then becomes the Rideau Canal Skateway.[24] When the canal has built up a sufficient ice thickness, snow is removed from the ice surface and it is flooded in order to make the ice even more thick and smooth.[28] Samples of ice are tested for quality and thickness.[24] When it is safe to skate on, the Rideau Canal Skateway is opened for the season.

The Rideau Canal Skateway is maintained by the NCC (National Capital Commission).[24] The ice is maintained by crews 24 hours a day, seven days a week.[28] The snow and ice shavings are cleared off the surface every day and the ice surface is flooded each night with a “water dispersion machine” (weather permitting) to fill in any cracks that were caused from the ice contracting and expanding.[28] There are approximately 20 holes along the side of the Skateway that serve the purpose of flooding the ice surface to make it smoother for skaters.[28]

Two types of ice can form on the Rideau Canal Skateway, which are “white ice” and “clear ice”.[24] White ice has a milky appearance with air bubbles, and is formed when snow and water mix and then freeze.[24] White ice can also be formed by mechanically flooding the ice surface with water to increase the thickness of the ice cap.[24] The other type of ice is called “clear ice”, which has a colourless appearance and is formed when ice crystals build up below the frozen surface in cold temperatures.[24] If snow accumulates on the ice it can negatively impact the conditions for skating. Snow depresses the ice surface and slows down the formation of ice crystals beneath the surface.[24]

Ice conditions can be classified as very good, good, fair or poor.[29] They are updated twice daily by the NCC. The ideal (“very good”) conditions mean that there are “a limited number of pressure cracks”, the ice is very hard and durable overall, the ice surface is clean and smooth, there are a “limited number of rough areas”, and there is a “very good gliding surface.”[29]

See also

Tay Canal – a branch canal of the Rideau
Capital Pathway – the recreational pathway along the Rideau Canal
Trent-Severn Waterway – Central Ontario Canal System
Welland Canal – Niagara region Canal System
Saint Lawrence Seaway – Ontario–Quebec waterway system
Parks Canada Players – Heritage Theatre Series along the Rideau Canal

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Rideau Canal, UNESCO World Heritage, UNESCO.org. Retrieved 2008-01-14.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. UNESCO names World Heritage sites, BBC News, 28 June 2007. Retrieved 2008-01-14.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. History of the Rideau Canal, Rideau-info.com. Retrieved 2008-01-14.
  9. Rideau Heritage Route - Environment
  10. Rideau Canal - UNESCO World Heritage Centre
  11. HISTORY of the RIDEAU CANAL, The Canadian Canal Society
  12. 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
  13. Memorials, Rideau-info.com. Retrieved 2008-01-14.
  14. 14.0 14.1 14.2 Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. 17.0 17.1 Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. The Rideau Canal Waterway Frequently Asked Questions. Retrieved on 2009-06-24.
  20. Friends of the Rideau - Fauna of the Rideau
  21. 21.0 21.1 21.2 Lua error in package.lua at line 80: module 'strict' not found.
  22. 22.0 22.1 http://www.rideau-info.com/documents/how-a-lock-works-e.pdf
  23. 23.0 23.1 Winnipeg lays claim to world's longest skating path. CBC News, January 27, 2008. Retrieved 1 Oct 2010.
  24. 24.00 24.01 24.02 24.03 24.04 24.05 24.06 24.07 24.08 24.09 24.10 24.11 24.12 Lua error in package.lua at line 80: module 'strict' not found.
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. 26.0 26.1 Rideau Canal - Attractions
  27. 27.0 27.1 27.2 Lua error in package.lua at line 80: module 'strict' not found.
  28. 28.0 28.1 28.2 28.3 28.4 28.5 28.6 28.7 28.8 Lua error in package.lua at line 80: module 'strict' not found.
  29. 29.0 29.1 Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: The function "top" does not exist.

Lua error in package.lua at line 80: module 'strict' not found.Script error: The function "bottom" does not exist.