Washington State Route 105

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

State Route 105 marker

State Route 105
Route information
Auxiliary route of US 101
Defined by RCW 47.17.180
Maintained by WSDOT
Length: 48.56 mi[1] (78.15 km)
Major junctions
South end: US 101.svg US 101 in Raymond
  Spur plate.svg
WA-105.svg SR 105 Spur near Westport
North end: US 101.svg US 101 in Aberdeen
Location
Counties: Pacific, Grays Harbor
Highway system
SR 104 SR 106 x20px

State Route 105 is a state highway in the U.S. state of Washington. It is 48.56 miles (78.15 km) long, and begins in Raymond, ending in Aberdeen, Washington. It connects to U.S. Route 101 at both ends. While US 101 is a coastal route for much of its length along the West Coast, between Raymond and Aberdeen it takes a more inland route, and SR 105 parallels Willapa Bay, the Pacific Ocean, and Grays Harbor.

Route description

State Route 105 begins at an intersection with U.S. Route 101 in the northern part of Raymond, just north of US 101's intersection with State Route 6. It roughly follows the Willapa River then Willapa Bay westward, serving the towns of Tokeland and North Cove, then goes up the Pacific coast and back turns to the east just before Westport, where it meets with State Route 105 Spur.[1][2] It then ends in south Aberdeen, near Cosmopolis, where it reconnects to U.S. Route 101.[3]

Spur routes

State Route 105 Spur (more specifically referred to by the Washington State Department of Transportation (WSDOT) as "State Route 105 Spur Westport") is a spur of State Route 105 that goes north into the town of Westport, USA. It snakes through the city streets, initially as Forrest Street, finally ending at the harbor.

The SR 105/105 Spur junction is about 5 miles (8 km) north of Grayland, Washington, immediately adjacent to Twin Harbors State Park. The spur is 4.02 miles (6.47 km) long.[1]

State Route 105 Spur can also refer to a 0.15-mile (240 m) section of the Aberdeen-area SR 105/U.S. Route 101 junction specifically referred to by WSDOT as "State Route 105 Spur Boone".

History

Part of the "Old State Road 105" route near "Washaway Beach, Cape Shoalwater" between Grayland and Tokeland, looking SE into Willapa Bay.

State Route 105 was added to Washington's state highway system in 1937 as Secondary State Highway 13-A.[4] This definition also included the spur north to Westport. In the 1964 state highway renumbering, SSH 13-A was assigned the designation SR 105.[5]

Between Grayland and Tokeland, SR 105 had to be re-routed inland from Cape Shoalwater, due to currents coming out of Willapa Bay causing severe erosion, taking many acres of land out to sea.[6]

Major intersections

County Location mi[1] km Destinations Notes
Pacific Raymond 0.00 0.00 US 101 – Aberdeen, South Bend
18.60 29.93 Tokeland Road
North Cove 21.16 34.05 Old State Route 105
Grays Harbor Grayland 26.68 42.94
30.15 48.52
SR 105 Spur – Westport
Aberdeen 48.46 77.99 US 101 south – Raymond Via SR 105 Spur Boone
48.56 78.15 US 101 north – Hoquiam, Olympia
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

Script error: No such module "Attached KML".

  1. 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.: "Secondary State Highway No. 13A; beginning at Raymond on Primary State Highway No. 13, thence in a westerly direction by the most feasible route by way of Tokeland, North Cove to the shore of Grays Harbor north of Westport; also beginning at Aberdeen on Primary State Highway No. 13, thence in a southwesterly direction by the most feasible route to a junction with Secondary State Highway No. 13A in the vicinity south of Westport."
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.