Silver(I,III) oxide

From Infogalactic: the planetary knowledge core
(Redirected from Silver(II) oxide)
Jump to: navigation, search
Silver(I,III) oxide
Names
IUPAC name
silver(I,III) Oxide
Other names
silver peroxide, argentic oxide, silver suboxide, divasil
Identifiers
1301-96-8 YesY
Properties
AgO

Ag2O.Ag2O3

Molar mass 123.87 g/mol
Appearance grey-black powder
diamagnetic
Density 7.48 g/cm3
Melting point >100 °C, decomposition
.0027 g/100 mL
Solubility soluble in alkalis
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Silver(I,III) oxide is the inorganic compound with the formula Ag4O4. It is a component of silver oxide-zinc alkaline batteries. It can be prepared by the slow addition of a silver(I) salt to a persulfate solution e.g. AgNO3 to a Na2S2O8 solution.[1] It adopts an unusual structure, being a mixed-valence compound.[2] It is a dark brown solid that decomposes with evolution of O2 in water. It dissolves in concentrated nitric acid to give brown solutions containing the Ag2+ ion.[3]

Structure

Although its empirical formula, AgO, suggests that silver is in the +2 oxidation state in this compound, AgO is in fact diamagnetic. X-ray diffraction studies show that the silver atoms adopt two different coordination environments, one having two collinear oxide neighbours and the other four coplanar oxide neighbours.[1] AgO is therefore formulated as AgIAgIIIO2[4] or Ag2O·Ag2O3. It is being a 1:1 molar mixture of silver(I) oxide, Ag2O, and silver(III) oxide, Ag2O3. It has previously been called silver peroxide, which is incorrect since does not contain the peroxide ion, O22−.

Preparation

US patent 4003757 (Lux and Chobanov) describes one method for preparing this oxide (then called Ag(II)-oxide) in a form suitable for batteries and gives the following example:

In 1.5 liters of aqueous solution containing 150 grams of sodium hydroxide, 65 grams of silver powder are suspended with continuous stirring. The silver powder has a density of approximately 1.6 grams per cubic centimeter. Its grain size distribution is: 52% under 10 microns; 33% 10 microns to 30 microns, 15% above 30 microns.

The liquid is then heated to about 85° C. Upon reaching this temperature, a total of 200 grams of potassium peroxidisulfate (K2S2O8) in portions of about 40 grams each is added at intervals of, for example, 1 hour. After addition of the final portion of oxidant, stirring is continued for 3 hours. The product is then filtered, washed to free it of alkali substances, dried at a temperature of approximately 80° C and reduced to particle form.

The foregoing yields approximately 73 grams of silver-(I,III)-oxide with more than 95% content of pure silver-(I,III)-oxide. The silver oxide produced is characterized by high thermodynamic stability, low internal discharge and consequent long shelf life. The rate of gas evolution of their products in 18% NaOH is below 1 microliter per gram-hour at room temperature. This stability is attributable to the fact that the process embodying the invention produces single crystals of exceptionally regular shape and monoclinic form.

References

  1. 1.0 1.1 Wells A.F. (1984) Structural Inorganic Chemistry 5th edition Oxford Science Publications ISBN 0-19-855370-6
  2. David Tudela "Silver(II) Oxide or Silver(I,III) Oxide?" J. Chem. Educ., 2008, volume 85, p 863. doi: 10.1021/ed085p863
  3. Peter Fischer, Martin Jansen "Electrochemical Syntheses of Binary Silver Oxides" 1995, vol. 30, pp. 50–55. doi:10.1002/9780470132616.ch11
  4. Lua error in package.lua at line 80: module 'strict' not found. p. 1181.

<templatestyles src="Asbox/styles.css"></templatestyles>