T14 Heavy Tank
| Assault Tank T14 | |
|---|---|
| 300px
Assault Tank T14
|
|
| Type | Heavy tank |
| Place of origin |  United States |
| Production history | |
| Manufacturer | American Locomotive Company |
| Number built | 2[1] |
| Specifications | |
| Weight | 41 tons |
| Length | 6.19 m (20 ft 4 in) |
| Width | 3.17 m (10 ft 5 in) |
| Height | 2.99 m (9 ft 10 in) |
| Crew | 5 (Commander, gunner, loader, driver, co-driver) |
|
|
|
| Armor | 133 mm |
|
Main
armament |
75 mm M3 Gun 50 rounds |
|
Secondary
armament |
.50 M2 Browning machine gun (12.7 mm) 2x .30 M1919 Browning machine gun (7.62 mm) 9,000 rounds |
| Engine | Ford GAZ V8 520 hp (390 kW) |
| Suspension | HVSS |
|
Operational
range |
100 mi (161 km) radius of action[2] |
| Speed | 28 km/h (17 mph) |
The Assault Tank T14 was a joint project between the United States and the United Kingdom. The T14 tank was supposed to be a design that was to be shared by both countries to give a heavy infantry tank for both countries.
A pilot model was not delivered to the UK by 1944 by which time the British Churchill tank had been in service for two years and greatly improved over its initial model. The T14 project never came to fruition. US efforts working on a similarly well armoured tank but with a higher speed for use other than in infantry support led to the T20 Medium Tank.
Design and development
In 1941, the head of the United States Ordnance Department traveled to Britain to learn of their experience, ideas and requirements for the future. Among the discussion was the possibility of designing a well-armed and armoured combat vehicle, one that was stronger than the British (A22) "Churchill" infantry tank then in production.
The tank design would have a British QF 6-pounder (57 mm) or a US 75 mm gun and share many parts with the M4 Sherman but with armouring (at 101 mm thick) twice that of the M4 .[3]
The British initially ordered 8,500 in 1942 following which detail design work started. Testing of the pilot model which was completed in 1944 showed the vehicle to be much too heavy for practical use. By this time, the British Army was satisfied with the Churchill and its cruiser tank designs and further production of the T14 was halted. Only two were built; one tested in the US and the other sent to Britain.[4] The example sent to Britain survives in The Tank Museum, Bovington.[4] The British had developed the Heavy Assault Tank A33 "Excelsior" design to the same specification as the T14 but this did not go into service either.[5]
See also
References
- Notes
- Bibliography
- David Fletcher The Universal Tank: British Armour in the Second World War
- The Tank Museum accession record
- Lua error in package.lua at line 80: module 'strict' not found.
