Thorium(IV) chloride

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Thorium(IV) chloride
Thorium(IV) chloride cystal structure
Identifiers
10026-08-1 YesY
Jmol 3D model Interactive image
PubChem 66209
  • InChI=1S/4ClH.Th/h4*1H;/q;;;;+4/p-4
  • Cl[Th](Cl)(Cl)Cl
Properties
ThCl4
Molar mass 373.849 g/mol
Appearance white needles
hygroscopic
Density 4.59 g/cm3, solid
Melting point 770 °C (1,420 °F; 1,040 K)
Boiling point 921 °C (1,690 °F; 1,194 K)
Structure
tetragonal
Vapor pressure {{{value}}}
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Thorium(IV) chloride (ThCl4) is an inorganic chemical compound. In addition to the anhydrous ThCl4, two hydrates have been reported: ThCl4(H2O)4[1] and ThCl4(H2O)8.[2] These hydroscopic salts are water-soluble and white, at room temperature. Similar to other thorium complexes thorium(IV) chloride has a high melting point 770 °C (1,418 °F) and a boiling point of 921 °C (1,690 °F). As with any other actinide core, thorium (IV) is radioactive and has sometimes been used in the production of nuclear energy. Thorium (IV) chloride does not appear naturally but instead is derived from Thorite, Thorianite, or Monazite which are naturally occurring formations.

History

Thorium was first discovered by Jons Jacob Berzelius in 1828. After receiving a sample of minerals from his colleague Jens Esmarck, Berzelius was able to isolate thorium using a method that had been used for other metals like cerium, zirconium, and titanium. This process involved using alkali metals to disassociate the thorium from its prior ligand form ThSiO4 (further described in synthesis). An intermediate in the isolation process was thorium(IV) chloride and thus the compound was discovered.[3]

Structures

The structure of thorium(IV) chloride is square planar with a symmetry of D4h. In this coordinate compound the bond length between the Th-Cl bond is 2.690 Å. The structure has been reported as hydrous or anhydrous. Due to the compound’s hydroscopic nature in the presence of water it can form either ThCl4(H2O)4 and ThCl4(H2O)8.[4]

Synthesis

Thorium(IV) Chloride can be produced in a variety of ways but the most common starting reactant is either thorium dioxide or Thorium (IV) orthosilicate.

One way thorium(IV) chloride is synthesized is through a carbothermic reaction. The carbothermic reaction require very high temperature ranging from 700 °C to 2600 °C. What necessitates these extreme environments are thorium dioxides melting temperature of 3,390 °C.[4] The reaction between graphite and thorium dioxide usually takes place in a stream of chlorine gas forming the thorium(IV) chloride. However the chlorination reaction can be done by another compound Cl2-CCl4 which is a more stable reactant than pure Chlorine gas. Cl2-CCl4 is formed by passing a gas mixture of Cl2 through a wash bottle filled with CCl4.[5][6]

ThO2 + 2 C + 4 Cl2 → ThCl4 + 2 CO

Another less common method of synthesis relies on heating thorium metal with NH4Cl at 300 °C for 30 h making a (NH4)2ThCl6. This product is then heated at 350 °C under a high vacuum to produce ThCl4.[4]

Application

Thorium(IV) chloride is an intermediate in many different experiments. The first type of experiment is the purification of Thorium.

1. Reduction of ThCl4 with alkali metals.

2. Electrolysis of anhydrous thorium(IV) chloride in fused mixture of NaCl and KCl.

3. Ca reduction of Thorium(IV) Chloride mixed with anhydrous zinc chloride.[7]

The process of producing pure thorium is normally for its production as the initial stage of producing a nuclear fuel. Thorium is sometimes mistaken for a nuclear fuel like uranium however it is not and requires neutron bombardment or other modifications to be applicable in the nuclear fuel cycle.[5]

The other application of thorium(IV) chloride is a perquisite for other thorium complexes. In these reactions Thorium (IV) Chloride is the initial reagent but it is first changed into ThCl4(DME)2. ThCl4(DME)2 is a versatile reagent that can be converted into ThCl4(TMEDA)2, ThBr4(DME)2.and others.[4]

References

  1. ↑ Cantat, Thibault; Scott, Brian L.; Kiplinger, Jaqueline L. "Convenient Access to the Anhydrous Thorium Tetrachloride Complexes ThCl4(DME)2, ThCl4(1,4-dioxane)2 and ThCl4(THF)3.5 using Commercially Available and Inexpensive Starting Materials" Chemical Communications 2010, 46, 919-921. doi:10.1039/b923558b
  2. ↑ P. Ehrlich "Titanium, Zirconium, Hafnium, and Thorium" in Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 1203.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ 4.0 4.1 4.2 4.3 Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.


<templatestyles src="Asbox/styles.css"></templatestyles>

Stub icon

This inorganic compound–related article is a stub. You can help Wikipedia by expanding it.
Retrieved from "https://infogalactic.com/w/index.php?title=Thorium(IV)_chloride&oldid=717865586"