Tobu Ogose Line

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Tobu Ogose Line
Tobu Tojo Line (TJ) symbol.svg
300px
Ogose Line 8000 series EMU at Sakado station, September 2006
Overview
Native name 東武越生線
Type Commuter rail
Locale Saitama Prefecture
Termini Sakado
Ogose
Stations 8
Operation
Opened 17 February 1932
Owner Tobu Railway
Depot(s) None
Rolling stock Tobu 8000 series
Technical
Line length 10.9 km (6.8 mi)
No. of tracks Single
Track gauge 1,067 mm (3 ft 6 in)
Minimum radius 205 m
Electrification 1,500 V DC, overhead catenary
Operating speed 90 km/h (55 mph)[1]
Route map
0.0 SakadoTobu Tojo Line
Kan-Etsu Expressway
2.8 Ippommatsu
Ōya
Nishi-Ōya Junction
Nippon Cement line
4.4 Nishi-Ōya
Morito
Komagawa River
5.6 Kawakado
7.6 Bushū-Nagase
8.6 Higashi-Moro
9.4 Bushū-Karasawa
10.9 Ogose
Hachiko Line

The Tobu Ogose Line (東武越生線 Tōbu Ogose-sen?) is a 10.9 km mostly single-track branchline in Saitama Prefecture, Japan, operated by the private railway operator Tobu Railway. It runs from Sakado Station on the Tobu Tojo Line to Ogose Station, connecting with the JR East Hachikō Line.[1]

Service outline

Service consists of four trains per hour in each direction during the daytime, increased to six trains per hour in the morning and evening peak periods.[2] Services are formed of 4-car 8000 series electric multiple unit (EMU) trains.

Stations

No. Name Japanese Distance (km) Transfers Location
TJ-26 Sakado 坂戸 0.0 Tobu Tojo Line Sakado Saitama Prefecture
TJ-41 Ippommatsu 一本松 2.8   Tsurugashima
TJ-42 Nishi-Ōya 西大家 4.4 Sakado
TJ-43 Kawakado 川角 5.6 Moroyama
TJ-44 Bushū-Nagase 武州長瀬 7.6
TJ-45 Higashi-Moro 東毛呂 8.6
TJ-46 Bushū-Karasawa 武州唐沢 9.4 Ogose
TJ-47 Ogose 越生 10.9 Hachikō Line

Closed stations

  • Ōya Station (大家駅?), between Ippommatsu and Nishi-Ōya stations.[3] Closed on 1 December 1945.[4]

Rolling stock

Since June 2008, all Ogose Line services are formed of 4-car 8000 series EMU trains. 7300 series EMUs were used up until 1984,[5] 7800 series EMUs were used up until 1985, 5000 series EMUs were used until 1990, and 10030 series and 10050 series EMUs were also used alongside the 8000 series trains until the start of driver-only operation in June 2008.

History

The line first opened as a freight line operated by the Ogose Railway (越生鉄道?) between Sakado and the Komagawa River (later Morito Station (森戸駅?)) on 17 February 1932.[4] The line was extended from Morito to Ogose on 16 December 1934, from which date passenger services also commenced.[4]

From 1 July 1943, the Ogose Railway was absorbed into the Tobu Railway, and the line was renamed the Tobu Ogose Line.[4] From 1 December 1944, all services on the line were suspended, as the line was considered non-essential as part of the war effort. Services were not resumed until 1 December 1945.[4]

The line was electrified in July 1950 at 1,500 V DC.[1] CTC signalling was commissioned on 1 October 1959, the first use of this system by the Tobu company.[4] Freight services between Nishi-Oya and Ogose ceased on 21 February 1984, and between Sakado and Nishi-Oya on 1 August 1984.[4] On 25 August 1987, the Bushu-Nagase to Higashi-Moro section was double-tracked.[4]

Through trains to and from Ikebukuro and Kawagoeshi on the Tojo Line operated until the 1970s. Between 1996 and 2003, a special direct Ogose Kanbai (越生観梅号?) train was operated between Ikebukuro and Ogose on certain weekends in February during the plum blossom viewing season. This train initially ran non-stop from Ikebukuro to Ogose (with a driver change at Sakado), but, in subsequent years, included stops at Asakadai and Kawagoe. From 2004 until 2007, regular scheduled trains on the Ogose Line were decorated with an Ogose Kanbai headboard for one day during March.

The Ogose Line switched to driver-only operation from the start of the revised timetable on 14 June 2008.[4] The start of driver-only operation also involved the installation of platform edge sensors at all stations on the Ogose Line.[6]

From 17 March 2012, station numbering was introduced on all Tobu lines. Tobu Tojo Line and Ogose Line stations were numbered prefixed with the letters "TJ".[7]

Former connecting lines

File:Nishi-Oya Junction 20130726 (2).JPG
Site of the former Nishi-Oya Junction, with the trackbed of the former freight spur branching off to the left, July 2013

A freight-only line serving the Nippon Cement works in Hidaka operated from 1963 until 1984, using a spur track which branched off from the line at Nishi-Ōya Junction, to the east of Nishi-Ōya Station.[3][8]

See also

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. "Tobu Tojo Line Timetable", published March 2013
  3. 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. "Your Tōjō", May 2008 issue
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.

External links