Circular motion

From Infogalactic: the planetary knowledge core
(Redirected from Uniform circular motion)
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Lua error in package.lua at line 80: module 'strict' not found.

Lua error in package.lua at line 80: module 'strict' not found. In physics, circular motion is a movement of an object along the circumference of a circle or rotation along a circular path. It can be uniform, with constant angular rate of rotation and constant speed, or non-uniform with a changing rate of rotation. The rotation around a fixed axis of a three-dimensional body involves circular motion of its parts. The equations of motion describe the movement of the center of mass of a body.

Examples of circular motion include: an artificial satellite orbiting the Earth at constant height, a stone which is tied to a rope and is being swung in circles, a car turning through a curve in a race track, an electron moving perpendicular to a uniform magnetic field, and a gear turning inside a mechanism.

Since the object's velocity vector is constantly changing direction, the moving object is undergoing acceleration by a centripetal force in the direction of the center of rotation. Without this acceleration, the object would move in a straight line, according to Newton's laws of motion.

Uniform circular motion

Figure 1: Velocity v and acceleration a in uniform circular motion at angular rate ω; the speed is constant, but the velocity is always tangent to the orbit; the acceleration has constant magnitude, but always points toward the center of rotation
Figure 2: The velocity vectors at time t and time t + dt are moved from the orbit on the left to new positions where their tails coincide, on the right. Because the velocity is fixed in magnitude at v = r ω, the velocity vectors also sweep out a circular path at angular rate ω. As dt → 0, the acceleration vector a becomes perpendicular to v, which means it points toward the center of the orbit in the circle on the left. Angle ω dt is the very small angle between the two velocities and tends to zero as dt→ 0
Figure 3: (Left) Ball in circular motion – rope provides centripetal force to keep ball in circle (Right) Rope is cut and ball continues in straight line with velocity at the time of cutting the rope, in accord with Newton's law of inertia, because centripetal force is no longer there

In physics, uniform circular motion describes the motion of a body traversing a circular path at constant speed. Since the body describes circular motion, its distance from the axis of rotation remains constant at all times. Though the body's speed is constant, its velocity is not constant: velocity, a vector quantity, depends on both the body's speed and its direction of travel. This changing velocity indicates the presence of an acceleration; this centripetal acceleration is of constant magnitude and directed at all times towards the axis of rotation. This acceleration is, in turn, produced by a centripetal force which is also constant in magnitude and directed towards the axis of rotation.

In the case of rotation around a fixed axis of a rigid body that is not negligibly small compared to the radius of the path, each particle of the body describes a uniform circular motion with the same angular velocity, but with velocity and acceleration varying with the position with respect to the axis.

Formulas

Figure 1: Vector relationships for uniform circular motion; vector ω representing the rotation is normal to the plane of the orbit.

For motion in a circle of radius r, the circumference of the circle is C = 2π r. If the period for one rotation is T, the angular rate of rotation, also known as angular velocity, ω is:

 \omega = \frac {2 \pi}{T} \  = \frac {d\theta}{dt} \ and the units are radians/second

The speed of the object travelling the circle is:

 v\, = \frac {2 \pi r } {T} = \omega r

The angle θ swept out in a time t is:

 \theta = 2 \pi \frac{t}{T} = \omega t\,

The angular acceleration,α of the particle is:

 \alpha\ = \frac {d\omega}{dt} \

In the case of uniform circular motion α will be zero.

The acceleration due to change in the direction is:

 a\, = \frac {v^2} {r} \, = {\omega^2} {r}

The centripetal and centrifugal force can also be found out using acceleration:

 F_c = ma =\frac{mv^2}{r} \

The vector relationships are shown in Figure 1. The axis of rotation is shown as a vector ω perpendicular to the plane of the orbit and with a magnitude ω = dθ / dt. The direction of ω is chosen using the right-hand rule. With this convention for depicting rotation, the velocity is given by a vector cross product as

 \mathbf{v} = \boldsymbol \omega \times \mathbf r \ ,

which is a vector perpendicular to both ω and r ( t ), tangential to the orbit, and of magnitude ω r. Likewise, the acceleration is given by

 \mathbf{a} = \boldsymbol \omega \times \mathbf v = \boldsymbol \omega \times \left( \boldsymbol \omega \times \mathbf r \right) \ ,

which is a vector perpendicular to both ω and v ( t ) of magnitude ω |v| = ω2 r and directed exactly opposite to r ( t ).[1]

In the simplest case the speed, mass and radius are constant.

Consider a body of one kilogram, moving in a circle of radius one metre, with an angular velocity of one radian per second.

In polar coordinates

Figure 4: Polar coordinates for circular trajectory. On the left is a unit circle showing the changes \mathbf{d\hat u_R} and \mathbf{d\hat u_\theta} in the unit vectors \mathbf{\hat u_R} and \mathbf{\hat u_\theta} for a small increment \mathrm{d \theta} in angle \mathrm{\theta}.

During circular motion the body moves on a curve that can be described in polar coordinate system as a fixed distance R from the center of the orbit taken as origin, oriented at an angle θ (t) from some reference direction. See Figure 4. The displacement vector \stackrel{\vec r}{} is the radial vector from the origin to the particle location:

\vec r=R \hat u_R (t)\ ,

where \hat u_R (t) is the unit vector parallel to the radius vector at time t and pointing away from the origin. It is convenient to introduce the unit vector orthogonal to \hat u_R as well, namely \hat u_\theta. It is customary to orient \hat u_\theta to point in the direction of travel along the orbit.

The velocity is the time derivative of the displacement:

 \vec v = \frac {d}{dt} \vec r(t) = \frac {d R}{dt} \hat u_R + R\frac {d \hat u_R } {dt} \ .

Because the radius of the circle is constant, the radial component of the velocity is zero. The unit vector \hat u_R has a time-invariant magnitude of unity, so as time varies its tip always lies on a circle of unit radius, with an angle θ the same as the angle of \vec r (t). If the particle displacement rotates through an angle dθ in time dt, so does \hat u_R, describing an arc on the unit circle of magnitude dθ. See the unit circle at the left of Figure 4. Hence:

 \frac {d \hat u_R } {dt} = \frac {d \theta } {dt} \hat u_\theta \ ,

where the direction of the change must be perpendicular to \hat u_R (or, in other words, along \hat u_\theta) because any change d\hat u_R in the direction of \hat u_R would change the size of \hat u_R . The sign is positive, because an increase in dθ implies the object and \hat u_R have moved in the direction of \hat u_\theta. Hence the velocity becomes:

 \vec v = \frac {d}{dt} \vec r(t) = R\frac {d \hat u_R } {dt} = R \frac {d \theta } {dt} \hat u_\theta \ = R \omega \hat u_\theta \ .

The acceleration of the body can also be broken into radial and tangential components. The acceleration is the time derivative of the velocity:

 \vec a = \frac {d}{dt} \vec v = \frac {d}{dt} \left(R\ \omega \ \hat u_\theta \ \right) \ .
=R \left( \frac {d \omega}{dt}\ \hat u_\theta + \omega \ \frac {d \hat u_\theta}{dt} \right) \ .

The time derivative of \hat u_\theta is found the same way as for \hat u_R . Again, \hat u_\theta is a unit vector and its tip traces a unit circle with an angle that is π/2 + θ. Hence, an increase in angle dθ by \vec r (t) implies \hat u_\theta traces an arc of magnitude dθ, and as \hat u_\theta is orthogonal to \hat u_R , we have:

 \frac {d \hat u_\theta } {dt} = -\frac {d \theta } {dt} \hat u_R = -\omega \hat u_R\ ,

where a negative sign is necessary to keep \hat u_\theta orthogonal to \hat u_R . (Otherwise, the angle between \hat u_\theta and \hat u_R would decrease with increase in dθ.) See the unit circle at the left of Figure 4. Consequently the acceleration is:

\vec a = R \left( \frac {d \omega}{dt}\ \hat u_\theta + \omega \ \frac {d \hat u_\theta}{dt} \right)
=R \frac {d \omega}{dt}\ \hat u_\theta - \omega^2 R \ \hat u_R \ .

The centripetal acceleration is the radial component, which is directed radially inward:

\vec a_R= -\omega ^2R \hat u_R \ ,

while the tangential component changes the magnitude of the velocity:

\vec a_{\theta}= R \frac {d \omega}{dt}\ \hat u_\theta = \frac {d R \omega}{dt}\ \hat u_\theta =\frac {d |\vec v|}{dt}\ \hat u_\theta \ .

Using complex numbers

Circular motion can be described using complex numbers. Let the x axis be the real axis and the y axis be the imaginary axis. The position of the body can then be given as z, a complex "vector":

z=x+iy=R(\cos \theta +i \sin \theta)=Re^{i\theta}\ ,

where i is the imaginary unit, and

\theta =\theta (t)\ ,

is the angle of the complex vector with the real axis and is a function of time t. Since the radius is constant:

\dot R =\ddot R =0 \ ,

where a dot indicates time differentiation. With this notation the velocity becomes:

v=\dot z = \frac {d (R e^{i \theta})}{d t} = R \frac {d (e^{i \theta})}{d t} = R (e^{i \theta}) \frac {d (i \theta)}{d t} = iR\dot \theta e^{i\theta} = i\omega \cdot Re^{i\theta}= i\omega z

and the acceleration becomes:

a=\dot v =i\dot \omega z +i \omega \dot z =(i\dot \omega -\omega^2)z
= \left(i\dot \omega-\omega^2 \right) R e^{i\theta}
=-\omega^2 R e^{i\theta} + \dot \omega e^{i\frac{\pi}{2}}R e^{i\theta} \ .

The first term is opposite in direction to the displacement vector and the second is perpendicular to it, just like the earlier results shown before.

Discussion

Velocity

Figure 1 illustrates velocity and acceleration vectors for uniform motion at four different points in the orbit. Because the velocity v is tangent to the circular path, no two velocities point in the same direction. Although the object has a constant speed, its direction is always changing. This change in velocity is caused by an acceleration a, whose magnitude is (like that of the velocity) held constant, but whose direction also is always changing. The acceleration points radially inwards (centripetally) and is perpendicular to the velocity. This acceleration is known as centripetal acceleration.

For a path of radius r, when an angle θ is swept out, the distance travelled on the periphery of the orbit is s = rθ. Therefore, the speed of travel around the orbit is

 v = r \frac{d\theta}{dt} = r\omega,

where the angular rate of rotation is ω. (By rearrangement, ω = v/r.) Thus, v is a constant, and the velocity vector v also rotates with constant magnitude v, at the same angular rate ω.

Relativistic circular motion

In this case the three-acceleration vector is perpendicular to the three-velocity vector,

 \vec{u}\cdot \vec{a} = 0.

and the square of proper acceleration, expressed as a scalar invariant, the same in all reference frames,

 \alpha^2 = \gamma^4 a^2 + \gamma^6(\vec{u}\cdot \vec{a})^2,

becomes the expression for circular motion,

 \alpha^2 = \gamma^4 a^2.

or, taking the positive square root and using the three-acceleration, we arrive at the proper acceleration for circular motion:

 \alpha = \gamma^2 \frac{v^2}{r}.

Acceleration

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

The left-hand circle in Figure 2 is the orbit showing the velocity vectors at two adjacent times. On the right, these two velocities are moved so their tails coincide. Because speed is constant, the velocity vectors on the right sweep out a circle as time advances. For a swept angle dθ = ω dt the change in v is a vector at right angles to v and of magnitude v dθ, which in turn means that the magnitude of the acceleration is given by

 a = v \frac{d\theta}{dt} = v\omega = \frac{v^2}{r}
Centripetal acceleration for some values of radius and magnitude of velocity
|v|


  r
1 m/s
3.6 km/h
2.2 mph
2 m/s
7.2 km/h
4.5 mph
5 m/s
18 km/h
11 mph
10 m/s
36 km/h
22 mph
20 m/s
72 km/h
45 mph
50 m/s
180 km/h
110 mph
100 m/s
360 km/h
220 mph
Slow walk Bicycle City car Aerobatics
10 cm
3.9 in
Laboratory
centrifuge
10 m/s²
1.0 g
40 m/s²
4.1 g
250 m/s²
25 g
1.0 km/s²
100 g
4.0 km/s²
410 g
25 km/s²
2500 g
100 km/s²
10000 g
20 cm
7.9 in
5.0 m/s²
0.51 g
20 m/s²
2.0 g
130 m/s²
13 g
500 m/s²
51 g
2.0 km/s²
200 g
13 km/s²
1300 g
50 km/s²
5100 g
50 cm
1.6 ft
2.0 m/s²
0.20 g
8.0 m/s²
0.82 g
50 m/s²
5.1 g
200 m/s²
20 g
800 m/s²
82 g
5.0 km/s²
510 g
20 km/s²
2000 g
1 m
3.3 ft
Playground
carousel
1.0 m/s²
0.10 g
4.0 m/s²
0.41 g
25 m/s²
2.5 g
100 m/s²
10 g
400 m/s²
41 g
2.5 km/s²
250 g
10 km/s²
1000 g
2 m
6.6 ft
500 mm/s²
0.051 g
2.0 m/s²
0.20 g
13 m/s²
1.3 g
50 m/s²
5.1 g
200 m/s²
20 g
1.3 km/s²
130 g
5.0 km/s²
510 g
5 m
16 ft
200 mm/s²
0.020 g
800 mm/s²
0.082 g
5.0 m/s²
0.51 g
20 m/s²
2.0 g
80 m/s²
8.2 g
500 m/s²
51 g
2.0 km/s²
200 g
10 m
33 ft
Roller-coaster
vertical loop
100 mm/s²
0.010 g
400 mm/s²
0.041 g
2.5 m/s²
0.25 g
10 m/s²
1.0 g
40 m/s²
4.1 g
250 m/s²
25 g
1.0 km/s²
100 g
20 m
66 ft
50 mm/s²
0.0051 g
200 mm/s²
0.020 g
1.3 m/s²
0.13 g
5.0 m/s²
0.51 g
20 m/s²
2 g
130 m/s²
13 g
500 m/s²
51 g
50 m
160 ft
20 mm/s²
0.0020 g
80 mm/s²
0.0082 g
500 mm/s²
0.051 g
2.0 m/s²
0.20 g
8.0 m/s²
0.82 g
50 m/s²
5.1 g
200 m/s²
20 g
100 m
330 ft
Freeway
on-ramp
10 mm/s²
0.0010 g
40 mm/s²
0.0041 g
250 mm/s²
0.025 g
1.0 m/s²
0.10 g
4.0 m/s²
0.41 g
25 m/s²
2.5 g
100 m/s²
10 g
200 m
660 ft
5.0 mm/s²
0.00051 g
20 mm/s²
0.0020 g
130 m/s²
0.013 g
500 mm/s²
0.051 g
2.0 m/s²
0.20 g
13 m/s²
1.3 g
50 m/s²
5.1 g
500 m
1600 ft
2.0 mm/s²
0.00020 g
8.0 mm/s²
0.00082 g
50 mm/s²
0.0051 g
200 mm/s²
0.020 g
800 mm/s²
0.082 g
5.0 m/s²
0.51 g
20 m/s²
2.0 g
1 km
3300 ft
High-speed
railway
1.0 mm/s²
0.00010 g
4.0 mm/s²
0.00041 g
25 mm/s²
0.0025 g
100 mm/s²
0.010 g
400 mm/s²
0.041 g
2.5 m/s²
0.25 g
10 m/s²
1.0 g

Non-uniform

Nonuniform circular motion.svg

In Non-uniform circular motion an object is moving in a circular path with a varying speed. Since the speed is changing, there is tangential acceleration in addition to normal acceleration.

In non-uniform circular motion the net acceleration (a) is along direction of Δv which is directed inside circle but does not pass through its center (see figure). The net acceleration may be resolved into two components: tangential acceleration and normal acceleration also known as the centripetal or radial acceleration. Unlike tangential acceleration, centripetal acceleration is present in both uniform and non-uniform circular motion.

Freebody circular.svg

In non-uniform circular motion, normal force does not always point in the opposite direction of weight. Here is an example with an object traveling in a straight path then loops a loop back into a straight path again.

Freebody object.svg

This diagram shows the normal force pointing in other directions rather than opposite to the weight force. The normal force is actually the sum of the radial and tangential forces. The component of weight force is responsible for the tangential force here (We have neglected frictional force). The radial force (centripetal force) is due the change in direction of velocity as discussed earlier.

In non-uniform circular motion, normal force and weight may point in the same direction. Both forces can point down, yet the object will remain in a circular path without falling straight down. First let’s see why normal force can point down in the first place. In the first diagram, let's say the object is a person sitting inside a plane, the two forces point down only when it reaches the top of the circle. The reason for this is that the normal force is the sum of the tangential force and centripetal force. The tangential force is zero at the top (as no work is performed when the motion is perpendicular to the direction of force applied. Here weight force is perpendicular to the direction of motion of the object at the top of the circle) and centripetal force points down,thus normal force will point down as well. From a logical standpoint, a person who is travelling in the plane will be upside down at the top of the circle. At that moment, the person’s seat is actually pushing down on the person, which is the normal force.

Normal and weight.svg

The reason why the object does not fall down when subjected to only downward forces is a simple one. Think about what keeps an object up after it is thrown. Once an object is thrown into the air, there is only the downward force of earth’s gravity that acts on the object. That does not mean that once an object is thrown in the air, it will fall instantly. What keeps that object up in the air is its velocity. The first of Newton's laws of motion states that an object’s inertia keeps it in motion, and since the object in the air has a velocity, it will tend to keep moving in that direction.

Applications

Solving applications dealing with non-uniform circular motion involves force analysis. With uniform circular motion, the only force acting upon an object traveling in a circle is the centripetal force. In non-uniform circular motion, there are additional forces acting on the object due to a non-zero tangential acceleration. Although there are additional forces acting upon the object, the sum of all the forces acting on the object will have to equal to the centripetal force.

F_{net} = ma\,

F_{net} = ma_r\,

F_{net}  = mv^2/r\,

F_{net} = F_c\,

Radial acceleration is used when calculating the total force. Tangential acceleration is not used in calculating total force because it is not responsible for keeping the object in a circular path. The only acceleration responsible for keeping an object moving in a circle is the radial acceleration. Since the sum of all forces is the centripetal force, drawing centripetal force into a free body diagram is not necessary and usually not recommended.

Using F_{net} = F_c\,, we can draw free body diagrams to list all the forces acting on an object then set it equal to F_c\,. Afterwards, we can solve for what ever is unknown (this can be mass, velocity, radius of curvature, coefficient of friction, normal force, etc.). For example, the visual above showing an object at the top of a semicircle would be expressed as F_c = (n+mg)\,.

In uniform circular motion, total acceleration of an object in a circular path is equal to the radial acceleration. Due to the presence of tangential acceleration in non uniform circular motion, that does not hold true any more. To find the total acceleration of an object in non uniform circular, find the vector sum of the tangential acceleration and the radial acceleration.

\sqrt{a_r^2+a_t^2}=a

Radial acceleration is still equal to v^2/r . Tangential acceleration is simply the derivative of the velocity at any given point: a_t = dv/dt \,. This root sum of squares of separate radial and tangential accelerations is only correct for circular motion; for general motion within a plane with polar coordinates (r,\theta), the Coriolis term a_c = 2(dr/dt)(d\theta/dt) should be added to a_t, whereas radial acceleration then becomes a_r=- v^2/r+d^2 r/dt^2.

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found., Chapter 5 page 96

External links

ml:വര്‍ത്തുളചലനം

vi:Chuyển động quay