Uniform polyhedron

Platonic solid: Tetrahedron

Uniform star polyhedron: Snub dodecadodecahedron

A uniform polyhedron is a polyhedron which has regular polygons as faces and is vertex-transitive (transitive on its vertices, isogonal, i.e. there is an isometry mapping any vertex onto any other). It follows that all vertices are congruent, and the polyhedron has a high degree of reflectional and rotational symmetry.

Uniform polyhedra may be regular (if also face and edge transitive), quasi-regular (if edge transitive but not face transitive) or semi-regular (if neither edge nor face transitive). The faces and vertices need not be convex, so many of the uniform polyhedra are also star polyhedra.

Excluding the infinite sets, there are 75 uniform polyhedra (or 76 if edges are allowed to coincide).

• Convex
  • 5 Platonic solids – regular convex polyhedra
  • 13 Archimedean solids – 2 quasiregular and 11 semiregular convex polyhedra
• Star
  • 4 Kepler–Poinsot polyhedra – regular nonconvex polyhedra
  • 53 uniform star polyhedra – 5 quasiregular and 48 semiregular
  • 1 star polyhedron found by John Skilling with pairs of edges that coincide, called the great disnub dirhombidodecahedron (Skilling's figure).

There are also two infinite sets of uniform prisms and antiprisms, including convex and star forms.

Dual polyhedra to uniform polyhedra are face-transitive (isohedral) and have regular vertex figures, and are generally classified in parallel with their dual (uniform) polyhedron. The dual of a regular polyhedron is regular, while the dual of an Archimedean solid is a Catalan solid.

The concept of uniform polyhedron is a special case of the concept of uniform polytope, which also applies to shapes in higher-dimensional (or lower-dimensional) space.

History

Regular convex polyhedra:

• The Platonic solids date back to the classical Greeks and were studied by the Pythagoreans, Plato (c. 424 – 348 BC), Theaetetus (c. 417 BC – 369 BC), Timaeus of Locri (ca. 420–380 BC) and Euclid (fl. 300 BC). The Etruscans discovered the regular dodecahedron before 500 BC.

Nonregular uniform convex polyhedra:

• The cuboctahedron was known by Plato.
• Archimedes (287 BC – 212 BC) discovered all of the 13 Archimedean solids. His original book on the subject was lost, but Pappus of Alexandria (90 – c. 350 AD) mentioned Archimedes listed 13 polyhedra.
• Piero della Francesca (1415 – 1492) rediscovered the five truncation of the Platonic solids: truncated tetrahedron, truncated octahedron, truncated cube, truncated dodecahedron, and truncated icosahedron.
• Luca Pacioli republished Francesca's work in De divina proportione in 1509, adding the rhombicuboctahedron, calling it a icosihexahedron for its 26 faces, which was drawn by Leonardo da Vinci.
• Johannes Kepler (1571–1630) was the first to publish the complete list of Archimedean solids, in 1619, as well as identified the infinite families of uniform prisms and antiprisms.

Regular star polyhedra:

• Kepler (1619) discovered two of the regular Kepler–Poinsot polyhedra and Louis Poinsot (1809) discovered the other two. The set of four were proven complete by Augustin Cauchy (1789 – 1857) and named by Arthur Cayley (1821 – 1895).

Other 53 nonregular star polyhedra:

• Of the remaining 53, Albert Badoureau (1881) discovered 36. Edmund Hess (1878) discovered two more and Pitsch (1881) independently discovered 18, of which 15 had not previously been discovered.
• The geometer H.S.M. Coxeter discovered the remaining twelve in collaboration with J. C. P. Miller (1930–1932) but did not publish. M.S. Longuet-Higgins and H.C. Longuet-Higgins independently discovered eleven of these.
• Coxeter, Longuet-Higgins & Miller (1954) published the list of uniform polyhedra.
• Sopov (1970) proved their conjecture that the list was complete.
• In 1974, Magnus Wenninger published his book Polyhedron models, which lists all 75 nonprismatic uniform polyhedra, with many previously unpublished names given to them by Norman Johnson.
• Skilling (1975) independently proved the completeness, and showed that if the definition of uniform polyhedron is relaxed to allow edges to coincide then there is just one extra possibility.
• In 1987, Edmond Bonan drew all the uniform polyhedra and their duals in 3D, with a Turbo Pascal program called Polyca : almost of them were shown during the International Stereoscopic Union Congress held at the Congress Theatre, Eastbourne, United Kingdom.
• In 1993, Zvi Har'El produced a complete kaleidoscopic construction of the uniform polyhedra and duals with a computer program called Kaleido, and summarized in a paper Uniform Solution for Uniform Polyhedra, counting figures 1-80.
• Also in 1993, R. Mäder ported this Kaleido solution to Mathematica with a slightly different indexing system.
• In 2002 Peter W. Messer discovered a minimal set of closed-form expressions for determining the main combinatorial and metrical quantities of any uniform polyhedron (and its dual) given only its Wythoff symbol.

Uniform star polyhedra

The 57 nonprismatic nonconvex forms are compiled by Wythoff constructions within Schwarz triangles.

Main article: uniform star polyhedron

Convex forms by Wythoff construction

The convex uniform polyhedra can be named by Wythoff construction operations and can be named in relation to the regular form.

In more detail the convex uniform polyhedron are given below by their Wythoff construction within each symmetry group.

Within the Wythoff construction, there are repetitions created by lower symmetry forms. The cube is a regular polyhedron, and a square prism. The octahedron is a regular polyhedron, and a triangular antiprism. The octahedron is also a rectified tetrahedron. Many polyhedra are repeated from different construction sources and are colored differently.

The Wythoff construction applies equally to uniform polyhedra and uniform tilings on the surface of a sphere, so images of both are given. The spherical tilings including the set of hosohedrons and dihedrons which are degenerate polyhedra.

These symmetry groups are formed from the reflectional point groups in three dimensions, each represented by a fundamental triangle (p q r), where p>1, q>1, r>1 and 1/p+1/q+1/r<1.

• Tetrahedral symmetry (3 3 2) - order 24
• Octahedral symmetry (4 3 2) - order 48
• Icosahedral symmetry (5 3 2) - order 120
• Dihedral symmetry (n 2 2), for all n=3,4,5,... - order 4n

The remaining nonreflective forms are constructed by alternation operations applied to the polyhedra with an even number of sides.

Along with the prisms and their dihedral symmetry, the spherical Wythoff construction process adds two regular classes which become degenerate as polyhedra - the dihedra and hosohedra, the first having only two faces, and the second only two vertices. The truncation of the regular hosohedra creates the prisms.

Below the convex uniform polyhedra are indexed 1-18 for the nonprismatic forms as they are presented in the tables by symmetry form. Repeated forms are in brackets.

For the infinite set of prismatic forms, they are indexed in four families:

1. Hosohedra H_2... (Only as spherical tilings)
2. Dihedra D_2... (Only as spherical tilings)
3. Prisms P_3... (Truncated hosohedra)
4. Antiprisms A_3... (Snub prisms)

Summary tables

Johnson name	Parent	Truncated	Rectified	Bitruncated (tr. dual)	Birectified (dual)	Cantellated	Omnitruncated (Cantitruncated)	Snub
Coxeter diagram
Extended Schläfli symbol	$\begin{Bmatrix} p , q \end{Bmatrix}$	$t\begin{Bmatrix} p , q \end{Bmatrix}$	$\begin{Bmatrix} p \\ q \end{Bmatrix}$	$t\begin{Bmatrix} q , p \end{Bmatrix}$	$\begin{Bmatrix} q , p \end{Bmatrix}$	$r\begin{Bmatrix} p \\ q \end{Bmatrix}$	$t\begin{Bmatrix} p \\ q \end{Bmatrix}$	$s\begin{Bmatrix} p \\ q \end{Bmatrix}$
	{p,q}	t{p,q}	r{p,q}	2t{p,q}	2r{p,q}	rr{p,q}	tr{p,q}	sr{p,q}
	t0{p,q}	t0,1{p,q}	t1{p,q}	t1,2{p,q}	t2{p,q}	t0,2{p,q}	t0,1,2{p,q}	ht0,1,2{p,q}
Wythoff symbol (p q 2)	q | p 2	2 q | p	2 | p q	2 p | q	p | q 2	p q | 2	p q 2 |	| p q 2
Vertex figure	pq	q.2p.2p	(p.q)2	p.2q.2q	qp	p.4.q.4	4.2p.2q	3.2.3.p.3.q
Tetrahedral (3 3 2)	3.3.3	3.6.6	3.3.3.3	3.6.6	3.3.3	(3.4.3.4)	(4.6.6)	(3.3.3.3.3)
Octahedral (4 3 2)	4.4.4	3.8.8	3.4.3.4	4.6.6	3.3.3.3	3.4.4.4	4.6.8)	3.3.3.3.4
Icosahedral (5 3 2)	5.5.5	3.10.10	3.5.3.5	5.6.6	3.3.3.3.3	3.4.5.4	4.6.10	3.3.3.3.5

And a sampling of Dihedral symmetries:

(p 2 2)	Parent	Truncated	Rectified	Bitruncated (tr. dual)	Birectified (dual)	Cantellated	Omnitruncated (Cantitruncated)	Snub
Coxeter diagram
Extended Schläfli symbol	$\begin{Bmatrix} p , 2 \end{Bmatrix}$	$t\begin{Bmatrix} p , 2 \end{Bmatrix}$	$\begin{Bmatrix} p \\ 2 \end{Bmatrix}$	$t\begin{Bmatrix} 2 , p \end{Bmatrix}$	$\begin{Bmatrix} 2 , p \end{Bmatrix}$	$r\begin{Bmatrix} p \\ 2 \end{Bmatrix}$	$t\begin{Bmatrix} p \\ 2 \end{Bmatrix}$	$s\begin{Bmatrix} p \\ 2 \end{Bmatrix}$
	{p,2}	t{p,2}	r{p,2}	2t{p,2}	2r{p,2}	rr{p,2}	tr{p,2}	sr{p,2}
	t0{p,2}	t0,1{p,2}	t1{p,2}	t1,2{p,2}	t2{p,2}	t0,2{p,2}	t0,1,2{p,2}	ht0,1,2{p,2}
Wythoff symbol	2 | p 2	2 2 | p	2 | p 2	2 p | 2	p | 2 2	p 2 | 2	p 2 2 |	| p 2 2
Vertex figure	p2	2.2p.2p	p.2.p.2	p.4.4	2p	p.4.2.4	4.2p.4	3.2.3.p.3.2
Dihedral (2 2 2)	{2,2}	2.4.4	2.2.2.2	4.4.2	2.2	2.4.2.4	4.4.4	3.3.3.2
Dihedral (3 2 2)	3.3	2.6.6	2.3.2.3	4.4.3	2.2.2	2.4.3.4	4.4.6	3.3.3.3
Dihedral (4 2 2)	4.4	2.8.8	2.4.2.4	4.4.4	2.2.2.2	2.4.4.4	4.4.8	3.3.3.4
Dihedral (5 2 2)	5.5	2.10.10	2.5.2.5	4.4.5	2.2.2.2.2	2.4.5.4	4.4.10	3.3.3.5
Dihedral (6 2 2)	6.6	2.12.12	2.6.2.6	4.4.6	2.2.2.2.2.2	2.4.6.4	4.4.12	3.3.3.6

Wythoff construction operators

Operation	Symbol	Coxeter diagram	Description
Parent	{p,q} t0{p,q}		Any regular polyhedron or tiling
Rectified (r)	r{p,q} t1{p,q}		The edges are fully truncated into single points. The polyhedron now has the combined faces of the parent and dual.
Birectified (2r) (also dual)	2r{p,q} t2{p,q}		The birectified (dual) is a further truncation so that the original faces are reduced to points. New faces are formed under each parent vertex. The number of edges is unchanged and are rotated 90 degrees. The dual of the regular polyhedron {p, q} is also a regular polyhedron {q, p}.
Truncated (t)	t{p,q} t0,1{p,q}		Each original vertex is cut off, with a new face filling the gap. Truncation has a degree of freedom, which has one solution that creates a uniform truncated polyhedron. The polyhedron has its original faces doubled in sides, and contains the faces of the dual.
Bitruncated (2t) (also truncated dual)	2t{p,q} t1,2{p,q}		Same as truncated dual.
Cantellated (rr) (Also expanded)	rr{p,q}		In addition to vertex truncation, each original edge is beveled with new rectangular faces appearing in their place. A uniform cantellation is half way between both the parent and dual forms.
Cantitruncated (tr) (Also omnitruncated)	tr{p,q} t0,1,2{p,q}		The truncation and cantellation operations are applied together to create an omnitruncated form which has the parent's faces doubled in sides, the dual's faces doubled in sides, and squares where the original edges existed.

Alternation operations

Operation	Symbol	Coxeter diagram	Description
Snub rectified (sr)	sr{p,q}		The alternated cantitruncated. All the original faces end up with half as many sides, and the squares degenerate into edges. Since the omnitruncated forms have 3 faces/vertex, new triangles are formed. Usually these alternated faceting forms are slightly deformed thereafter in order to end again as uniform polyhedra. The possibility of the latter variation depends on the degree of freedom.
Snub (s)	s{p,2q}		Alternated truncation
Cantic snub (s2)	s2{p,2q}
Alternated cantellation (hrr)	hrr{2p,2q}		Only possible in uniform tilings (infinite polyhedra), alternation of For example,
Half (h)	h{2p,q}		Alternation of , same as
Cantic (h2)	h2{2p,q}		Same as
Half rectified (hr)	hr{2p,2q}		Only possible in uniform tilings (infinite polyhedra), alternation of , same as or For example, = or
Quarter (q)	q{2p,2q}		Only possible in uniform tilings (infinite polyhedra), same as For example, = or

(3 3 2) T_d Tetrahedral symmetry

The tetrahedral symmetry of the sphere generates 5 uniform polyhedra, and a 6th form by a snub operation.

The tetrahedral symmetry is represented by a fundamental triangle with one vertex with two mirrors, and two vertices with three mirrors, represented by the symbol (3 3 2). It can also be represented by the Coxeter group A₂ or [3,3], as well as a Coxeter diagram: .

There are 24 triangles, visible in the faces of the tetrakis hexahedron and alternately colored triangles on a sphere:

#	Name	Graph A3	Graph A2	Picture	Tiling	Vertex figure	Coxeter and Schläfli symbols	Face counts by position			Element counts
								Pos. 2 [3] (4)	Pos. 1 [2] (6)	Pos. 0 [3] (4)	Faces	Edges	Vertices
1	Tetrahedron						{3,3}	{3}			4	6	4
[1]	Birectified tetrahedron (Same as tetrahedron)						t2{3,3}={3,3}			{3}	4	6	4
2	Rectified tetrahedron (Same as octahedron)						t1{3,3}=r{3,3}	{3}		{3}	8	12	6
3	Truncated tetrahedron						t0,1{3,3}=t{3,3}	{6}		{3}	8	18	12
[3]	Bitruncated tetrahedron (Same as truncated tetrahedron)						t1,2{3,3}=t{3,3}	{3}		{6}	8	18	12
4	Rhombitetratetrahedron (Same as cuboctahedron)						t0,2{3,3}=rr{3,3}	{3}	{4}	{3}	14	24	12
5	Truncated tetratetrahedron (Same as truncated octahedron)						t0,1,2{3,3}=tr{3,3}	{6}	{4}	{6}	14	36	24
6	Snub tetratetrahedron (Same as icosahedron)						sr{3,3}	{3}	2 {3}	{3}	20	30	12

(4 3 2) O_h Octahedral symmetry

The octahedral symmetry of the sphere generates 7 uniform polyhedra, and a 7 more by alternation. Six of these forms are repeated from the tetrahedral symmetry table above.

The octahedral symmetry is represented by a fundamental triangle (4 3 2) counting the mirrors at each vertex. It can also be represented by the Coxeter group B₂ or [4,3], as well as a Coxeter diagram: .

There are 48 triangles, visible in the faces of the disdyakis dodecahedron and alternately colored triangles on a sphere:

#	Name	Graph B3	Graph B2	Picture	Tiling	Vertex figure	Coxeter and Schläfli symbols	Face counts by position			Element counts
								Pos. 2 [4] (8)	Pos. 1 [2] (12)	Pos. 0 [3] (6)	Faces	Edges	Vertices
7	Cube						{4,3}	{4}			6	12	8
[2]	Octahedron						{3,4}			{3}	8	12	6
[4]	rectified cube rectified octahedron (Cuboctahedron)						{4,3}	{4}		{3}	14	24	12
8	Truncated cube						t0,1{4,3}=t{4,3}	{8}		{3}	14	36	24
[5]	Truncated octahedron						t0,1{3,4}=t{3,4}	{4}		{6}	14	36	24
9	Cantellated cube cantellated octahedron Rhombicuboctahedron						t0,2{4,3}=rr{4,3}	{8}	{4}	{6}	26	48	24
10	Omnitruncated cube omnitruncated octahedron Truncated cuboctahedron						t0,1,2{4,3}=tr{4,3}	{8}	{4}	{6}	26	72	48
[6]	Snub octahedron (Same as Icosahedron)						= s{3,4}=sr{3,3}		{3}	{3}	20	30	12
[1]	Half cube (Same as tetrahedron)						= h{4,3}={3,3}	1/2 {3}			4	6	4
[2]	Cantic cube (Same as Truncated tetrahedron)						= h2{4,3}=t{3,3}	1/2 {6}		1/2 {3}	8	18	12
[4]	(Same as cuboctahedron)						= rr{3,3}				14	24	12
[5]	(Same as truncated octahedron)						= tr{3,3}				14	36	24
[9]	Cantic snub octahedron (same as rhombicuboctahedron)						s2{3,4}=rr{3,4}				26	48	24
11	Snub cuboctahedron						sr{4,3}	{4}	2 {3}	{3}	38	60	24

(5 3 2) I_h Icosahedral symmetry

The icosahedral symmetry of the sphere generates 7 uniform polyhedra, and a 1 more by alternation. Only one is repeated from the tetrahedral and octahedral symmetry table above.

The icosahedral symmetry is represented by a fundamental triangle (5 3 2) counting the mirrors at each vertex. It can also be represented by the Coxeter group G₂ or [5,3], as well as a Coxeter diagram: .

There are 120 triangles, visible in the faces of the disdyakis triacontahedron and alternately colored triangles on a sphere:

#	Name	Graph (A2) [6]	Graph (H3) [10]	Picture	Tiling	Vertex figure	Coxeter and Schläfli symbols	Face counts by position			Element counts
								Pos. 2 [5] (12)	Pos. 1 [2] (30)	Pos. 0 [3] (20)	Faces	Edges	Vertices
12	Dodecahedron						{5,3}	{5}			12	30	20
[6]	Icosahedron						{3,5}			{3}	20	30	12
13	Rectified dodecahedron Rectified icosahedron Icosidodecahedron						t1{5,3}=r{5,3}	{5}		{3}	32	60	30
14	Truncated dodecahedron						t0,1{5,3}=t{5,3}	{10}		{3}	32	90	60
15	Truncated icosahedron						t0,1{3,5}=t{3,5}	{5}		{6}	32	90	60
16	Cantellated dodecahedron Cantellated icosahedron Rhombicosidodecahedron						t0,2{5,3}=rr{5,3}	{5}	{4}	{3}	62	120	60
17	Omnitruncated dodecahedron Omnitruncated icosahedron Truncated icosidodecahedron						t0,1,2{5,3}=tr{5,3}	{10}	{4}	{6}	62	180	120
18	Snub icosidodecahedron						sr{5,3}	{5}	2 {3}	{3}	92	150	60

(p 2 2) Prismatic [p,2], I₂(p) family (D_ph Dihedral symmetry)

Main article: Prismatic uniform polyhedron

The dihedral symmetry of the sphere generates two infinite sets of uniform polyhedra, prisms and antiprisms, and two more infinite set of degenerate polyhedra, the hosohedra and dihedra which exist as tilings on the sphere.

The dihedral symmetry is represented by a fundamental triangle (p 2 2) counting the mirrors at each vertex. It can also be represented by the Coxeter group I₂(p) or [n,2], as well as a prismatic Coxeter diagram: .

Below are the first five dihedral symmetries: D₂ ... D₆. The dihedral symmetry D_p has order 4n, represented the faces of a bipyramid, and on the sphere as an equator line on the longitude, and n equally-spaced lines of longitude.

(2 2 2) dihedral symmetry

There are 8 fundamental triangles, visible in the faces of the square bipyramid (Octahedron) and alternately colored triangles on a sphere:

#	Name	Picture	Tiling	Vertex figure	Coxeter and Schläfli symbols	Face counts by position			Element counts
						Pos. 2 [2] (2)	Pos. 1 [2] (2)	Pos. 0 [2] (2)	Faces	Edges	Vertices
D2 H2	digonal dihedron digonal hosohedron				{2,2}	{2}			2	2	2
D4	truncated digonal dihedron (Same as square dihedron)				t{2,2}={4,2}	{4}			2	4	4
P4 [7]	omnitruncated digonal dihedron (Same as cube)				t0,1,2{2,2}=tr{2,2}	{4}	{4}	{4}	6	12	8
A2 [1]	snub digonal dihedron (Same as tetrahedron)				sr{2,2}		2 {3}		4	6	4

(3 2 2) D_3h dihedral symmetry

There are 12 fundamental triangles, visible in the faces of the hexagonal bipyramid and alternately colored triangles on a sphere:

#	Name	Picture	Tiling	Vertex figure	Coxeter and Schläfli symbols	Face counts by position			Element counts
						Pos. 2 [3] (2)	Pos. 1 [2] (3)	Pos. 0 [2] (3)	Faces	Edges	Vertices
D3	Trigonal dihedron				{3,2}	{3}			2	3	3
H3	Trigonal hosohedron				{2,3}			{2}	3	3	2
D6	Truncated trigonal dihedron (Same as hexagonal dihedron)				t{3,2}	{6}			2	6	6
P3	Truncated trigonal hosohedron (Triangular prism)				t{2,3}	{3}	{4}		5	9	6
P6	Omnitruncated trigonal dihedron (Hexagonal prism)				t0,1,2{2,3}=tr{2,3}	{6}	{4}	{4}	8	18	12
A3 [2]	Snub trigonal dihedron (Same as Triangular antiprism) (Same as octahedron)				sr{2,3}	{3}	2 {3}		8	12	6
P3	Cantic snub trigonal dihedron (Triangular prism)				s2{2,3}=t{2,3}				5	9	6

(4 2 2) D_4h dihedral symmetry

There are 16 fundamental triangles, visible in the faces of the octagonal bipyramid and alternately colored triangles on a sphere:

#	Name	Picture	Tiling	Vertex figure	Coxeter and Schläfli symbols	Face counts by position			Element counts
						Pos. 2 [4] (2)	Pos. 1 [2] (4)	Pos. 0 [2] (4)	Faces	Edges	Vertices
D4	square dihedron				{4,2}	{4}			2	4	4
H4	square hosohedron				{2,4}			{2}	4	4	2
D8	Truncated square dihedron (Same as octagonal dihedron)				t{4,2}	{8}			2	8	8
P4 [7]	Truncated square hosohedron (Cube)				t{2,4}	{4}	{4}		6	12	8
D8	Omnitruncated square dihedron (Octagonal prism)				t0,1,2{2,4}=tr{2,4}	{8}	{4}	{4}	10	24	16
A4	Snub square dihedron (Square antiprism)				sr{2,4}	{4}	2 {3}		10	16	8
P4 [7]	Cantic snub square dihedron (Cube)				s2{4,2}=t{2,4}				6	12	8
A2 [1]	Snub square hosohedron (Digonal antiprism) (Tetrahedron)				s{2,4}=sr{2,2}				4	6	4

(5 2 2) D_5h dihedral symmetry

There are 20 fundamental triangles, visible in the faces of the decagonal bipyramid and alternately colored triangles on a sphere:

#	Name	Picture	Tiling	Vertex figure	Coxeter and Schläfli symbols	Face counts by position			Element counts
						Pos. 2 [5] (2)	Pos. 1 [2] (5)	Pos. 0 [2] (5)	Faces	Edges	Vertices
D5	Pentagonal dihedron				{5,2}	{5}			2	5	5
H5	Pentagonal hosohedron				{2,5}			{2}	5	5	2
D10	Truncated pentagonal dihedron (Same as decagonal dihedron)				t{5,2}	{10}			2	10	10
P5	Truncated pentagonal hosohedron (Same as pentagonal prism)				t{2,5}	{5}	{4}		7	15	10
P10	Omnitruncated pentagonal dihedron (Decagonal prism)				t0,1,2{2,5}=tr{2,5}	{10}	{4}	{4}	12	30	20
A5	Snub pentagonal dihedron (Pentagonal antiprism)				sr{2,5}	{5}	2 {3}		12	20	10
P5	Cantic snub pentagonal dihedron (Pentagonal prism)				s2{5,2}=t{2,5}				7	15	10

(6 2 2) D_6h dihedral symmetry

There are 24 fundamental triangles, visible in the faces of the dodecagonal bipyramid and alternately colored triangles on a sphere.

#	Name	Picture	Tiling	Vertex figure	Coxeter and Schläfli symbols	Face counts by position			Element counts
						Pos. 2 [6] (2)	Pos. 1 [2] (6)	Pos. 0 [2] (6)	Faces	Edges	Vertices
D6	Hexagonal dihedron				{6,2}	{6}			2	6	6
H6	Hexagonal hosohedron				{2,6}			{2}	6	6	2
D12	Truncated hexagonal dihedron (Same as dodecagonal dihedron)				t{6,2}	{12}			2	12	12
H6	Truncated hexagonal hosohedron (Same as hexagonal prism)				t{2,6}	{6}	{4}		8	18	12
P12	Omnitruncated hexagonal dihedron (Dodecagonal prism)				t0,1,2{2,6}=tr{2,6}	{12}	{4}	{4}	14	36	24
A6	Snub hexagonal dihedron (Hexagonal antiprism)				sr{2,6}	{6}	2 {3}		14	24	12
P3	Cantic hexagonal dihedron (Triangular prism)				= h2{6,2}=t{2,3}				5	9	6
P6	Cantic snub hexagonal dihedron (Hexagonal prism)				s2{6,2}=t{2,6}				8	18	12
A3 [2]	Snub hexagonal hosohedron (Same as Triangular antiprism) (Same as octahedron)				s{2,6}=sr{2,3}				8	12	6

See also

• Polyhedron
  • Regular polyhedron
  • Quasiregular polyhedron
  • Semiregular polyhedron
• List of uniform polyhedra
• List of Johnson solids
• List of Wenninger polyhedron models
• Polyhedron model
• List of uniform polyhedra by vertex figure
• List of uniform polyhedra by Wythoff symbol
• List of uniform polyhedra by Schwarz triangle
• Uniform tiling
• Uniform tilings in hyperbolic plane

References

• Brückner, M. Vielecke und vielflache. Theorie und geschichte.. Leipzig, Germany: Teubner, 1900. [2]
• [3]

External links

• Weisstein, Eric W., "Uniform Polyhedron", MathWorld.
• Uniform Solution for Uniform Polyhedra
• The Uniform Polyhedra
• Virtual Polyhedra Uniform Polyhedra
• Uniform polyhedron gallery