Uranium hexafluoride

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

Uranium hexafluoride
Uranium-hexafluoride-2D-V2.svg
Uranium-hexafluoride-3D-vdW.png
Uranium-hexafluoride-crystal-3D-vdW.png
Names
IUPAC names
Uranium hexafluoride
Uranium(VI) fluoride
Identifiers
7783-81-5 YesY
ChEBI CHEBI:30235 YesY
ChemSpider 22966 YesY
Jmol 3D model Interactive image
PubChem 24560
RTECS number YR4720000
UN number 2978 (<1% 235U)
2977 (>1% 235U)
  • InChI=1S/6FH.U/h6*1H;/q;;;;;;+6/p-6 YesY
    Key: SANRKQGLYCLAFE-UHFFFAOYSA-H YesY
  • InChI=1/6FH.U/h6*1H;/q;;;;;;+6/p-6/rF6U/c1-7(2,3,4,5)6
    Key: SANRKQGLYCLAFE-IIYYNVFAAT
  • F[U](F)(F)(F)(F)F
Properties
UF6
Molar mass 352.02 g/mol
Appearance colorless solid
Density 5.09 g/cm3, solid
Melting point 64.052 °C (147.294 °F; 337.202 K) (triple point at 151 kPa[1])
Boiling point 56.5 °C (133.7 °F; 329.6 K) (sublimes)
Reacts violently
Solubility soluble in chloroform, CCl4, liquid chlorine and bromine
dissolves in nitrobenzene
Structure
Orthorhombic, oP28
Pnma, No. 62
octahedral (Oh)
0
Thermochemistry
– solid: −430,4 ± 1,5 J·K−1·mol−1[2]

– gaseous: −280,4 ± 1,5 J·K−1·mol−1[2]

– solid: −(2197,7 ± 1,8) kJ·mol−1[2]

– gaseous: −(2148,1 ± 1,8) kJ·mol−1[2]

Vapor pressure {{{value}}}
Related compounds
Other anions
Uranium hexachloride
Other cations
Neptunium hexafluoride
Plutonium hexafluoride
Related uranium fluorides
Uranium(III) fluoride
Uranium(IV) fluoride
Uranium(V) fluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Uranium hexafluoride (UF6), referred to as "hex" in the nuclear industry, is a compound used in the uranium enrichment process that produces fuel for nuclear reactors and nuclear weapons. It forms solid grey crystals at standard temperature and pressure, is highly toxic, reacts violently with water and is corrosive to most metals. It reacts mildly with aluminium, forming a thin surface layer of AlF3 that resists further reaction.

Preparation

Milled uranium ore—U3O8 or "yellowcake"—is dissolved in nitric acid, yielding a solution of uranyl nitrate UO2(NO3)2. Pure uranyl nitrate is obtained by solvent extraction, then treated with ammonia to produce ammonium diuranate ("ADU", (NH4)2U2O7). Reduction with hydrogen gives UO2, which is converted with hydrofluoric acid (HF) to uranium tetrafluoride, UF4. Oxidation with fluorine yields UF6.

During nuclear reprocessing, uranium is reacted with chlorine trifluoride to give UF6:

U + 2 ClF3 → UF6 + Cl2

Properties

Physical properties

At atmospheric pressure, it sublimes at 56.5 °C.[3]

UF6 in a glass ampoule.

The solid state structure was determined by neutron diffraction at 77 K and 293 K.[4][5]

Chemical properties

It has been shown that uranium hexafluoride is an oxidant[8] and a Lewis acid that is able to bind to fluoride; for instance, the reaction of copper(II) fluoride with uranium hexafluoride in acetonitrile is reported to form copper(II) heptafluorouranate(VI), Cu(UF7)2.[9]

Polymeric uranium(VI) fluorides containing organic cations have been isolated and characterised by X-ray diffraction.[10]

Application in the nuclear fuel cycle

Phase diagram of UF6.

UF6 is used in both of the main uranium enrichment methods — gaseous diffusion and the gas centrifuge method — because it has a triple point at 64.05 °C (147 °F, 337 K) and slightly higher than normal atmospheric pressure. Fluorine has only a single naturally-occurring stable isotope, so isotopologues of UF6 differ in their molecular weight based solely on the uranium isotope present.[11]

All the other uranium fluorides are nonvolatile solids that are coordination polymers.

Gaseous diffusion requires about 60 times as much energy as the gas centrifuge process: gaseous diffusion-produced nuclear fuel produces 25 times more energy than is used in the diffusion process, while centrifuge-produced fuel produces 1,500 times more energy than is used in the centrifuge process.

In addition to its use in enrichment, uranium hexafluoride has been used in an advanced reprocessing method (fluoride volatility), which was developed in the Czech Republic. In this process, used oxide nuclear fuel is treated with fluorine gas to form a mixture of fluorides. This mixture is then distilled to separate the different classes of material.

Storage in gas cylinders

DUF6 cylinders: painted (left) and corroded (right)

About 95% of the depleted uranium produced to date is stored as uranium hexafluoride, DUF6, in steel cylinders in open air yards close to enrichment plants.[citation needed] Each cylinder contains up to 12.7 tonnes (or 14 US tons) of solid UF6. In the U.S. alone, 560,000 tonnes of depleted UF6 had accumulated by 1993.[citation needed] In 2005, 686,500 tonnes in 57,122 storage cylinders were located near Portsmouth, Ohio, Oak Ridge, Tennessee, and Paducah, Kentucky.[12][13]

The long-term storage of DUF6 presents environmental, health, and safety risks because of its chemical instability. When UF6 is exposed to moist air, it reacts with the water in the air to produce UO2F2 (uranyl fluoride) and HF (hydrogen fluoride) both of which are highly corrosive and toxic. Storage cylinders must be regularly inspected for signs of corrosion and leaks. The estimated lifetime of the steel cylinders is measured in decades.[14]

There have been several accidents involving uranium hexafluoride in the United States, including a cylinder-filling accident and material release at the Sequoyah Fuels Corporation in 1986.[15][16]The U.S. government has been converting DUF6 to solid uranium oxides for disposal.[17] Such disposal of the entire DUF6 inventory could cost anywhere from $15 million to $450 million.[18]

Ruptured 14-ton UF6 shipping cylinder. 1 fatality, dozens injured. ~29500 lbs of material released. Sequoyah Fuels Corporation 1986. 
DUF6 storage yard from afar 

References

  1. http://www.ibilabs.com/Uranium%20Hexafluoride.htm
  2. 2.0 2.1 2.2 2.3 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. J. C. Taylor, P. W. Wilson, J. W. Kelly: „The structures of fluorides. I. Deviations from ideal symmetry in the structure of crystalline UF6: a neutron diffraction analysis", Acta Crystallogr., 1973, B29, p. 7–12; doi:10.1107/S0567740873001895.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Documents
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.

Literature

  • Gmelins Handbuch der anorganischen Chemie, System Nr. 55, Uran, Teil A, p. 121–123.
  • Gmelins Handbuch der anorganischen Chemie, System Nr. 55, Uran, Teil C 8, p. 71–163.
  • R. DeWitt: Uranium hexafluoride: A survey of the physico-chemical properties, Technical report, GAT-280; Goodyear Atomic Corp., Portsmouth, Ohio; 12. August 1960; doi:10.2172/4025868.
  • Ingmar Grenthe, Janusz Drożdżynński, Takeo Fujino, Edgar C. Buck, Thomas E. Albrecht-Schmitt, Stephen F. Wolf: Uranium, in: Lester R. Morss, Norman M. Edelstein, Jean Fuger (Hrsg.): The Chemistry of the Actinide and Transactinide Elements, Springer, Dordrecht 2006; ISBN 1-4020-3555-1, p. 253–698; doi:10.1007/1-4020-3598-5_5 (p. 530–531, 557–564).
  • US-Patent 2535572: Preparation of UF6; 26. December 1950.
  • US-Patent 5723837: Uranium Hexafluoride Purification; 3. March 1998.

External links