Villiers Engineering

From Infogalactic: the planetary knowledge core
(Redirected from Villiers Ltd)
Jump to: navigation, search
Not to be confused with Amherst Villiers, automotive engineer and developer of the supercharger for the 'Blower Bentley'
Villiers Junior, a folding military welbike motorbike of WW2 era

Villiers Engineering was a manufacturer of motorcycles and cycle parts, and an engineering company based in Villiers Street, Wolverhampton, England.

Early history

In the 1890s John Marston's Sunbeam had become extremely successful, by relying on high quality of production and finish. But Marston was dissatisfied with the pedals on his machines, which he bought in. In 1890 he dispatched his son Charles to the US on a selling trip, but included in his instructions that Charles must discuss pedal engineering with Pratt and Whitney in Hartford, Connecticut and come back with a high class pedal and the machinery for making it. Charles said that the Villiers Engineering Co. was "the ultimate fruit" of his trip to the US,[1] being impressed by the production system and the labour saving devices. He pointed out that "it was not possible to develop these at Sunbeamland, which had long been working on another plan, but it was possible to start them in a new factory".[1]

As a result of the tour, in 1898, John Marston bought a small Japanning works based in Villiers Street, Wolverhampton. Under the direction of Charles, the company made cycle parts for the Sunbeam company. As the factory was producing more parts than Sunbeam required, it sold components to other manufacturers.

1902 was a momentous year for Villiers. Firstly, John Marston sold the company to his son Charles for £6,000 on a loan against future profits. Secondly, it developed and patented the cycle free-wheel, which every cycle manufacturer required. The production of free wheels reached its peak just after WWII, as the company produced 80,000 per week or 4 million per year.

Production pre First World War

Apart from the production of freewheels outlined above, the company produced its first engine in early 1912, a 350cc four-stroke complete with integral two-speed gearbox. Later that year it developed a 269cc two-stroke (70mm bore and stroke) and the simplcity of this engine and attractive price made it a rapid success. During 1913 the Sun-Villers motorcycle was launched manufactured by the Sun Cycle & Fittings Co.

By 1914 the Villiers 269cc 2-stroke engine had been adopted by a large number of motorcycle manufacturers, such as the Allday (Alldays & Onions), The Royal Ruby, The New Ryder, the Bown-Villiers, the Coventry-Eagle, the Gerrard, the Invicta (A. Barnett & Co), the Ixion, the Juno, and the Roulette.[2]

In spite of the huge success of the 269cc two-stroke, the four-stroke engine had not completely been shelved, as in October 1914, J.H Motors of Oldham announced[3] two motorcycles, the No.1 fitted with a 2.75HP Villiers four-stroke engine of 349cc (74.5 x 80mm bore and stroke), and a 2.5HP two-stroke model using the Villiers 269cc engine. Whether many of either model were made before war orders halted production in 1915 is unclear.

Other manufacturers known to use Villiers engines up to 1915 include the Campion, The Hobart,[4] the Chater-Lea, the Diamond, and the Excelsior.

Production during World War One

During World War One, in common with many firms not directly involved in making military transport, the Villiers factory changed to production of munitions, in particular fuses for 75mm shells. Companies engaged in war work still worked on new models anticipating the end of the war, with Villiers applying for 16 engine-related patents during the war. One particular issue was a generic problem - the fact that before the war most engines relied on German-made magnetos for ignition, which caused a major issue during the war. In January 1917 Villiers patented their solution to this problem - the flywheel-magneto, which was to become a standard feature of their engines.[5]

Production in the inter-war years

Immediately after the war Villiers picked up where they had left off, with supply of the 269cc engine, now as the Mark II engine with different method of attaching the exhaust. By 1919 the bikes that used the Villiers engines included the Excelsior lightweight, the Diamond (D.F.& M. Engineering Co), the Royal Ruby, the Wolf Lightweight (Wulfruna Engineering), the Carfield, the Ruffells, the P.V. (Elliston & Fell), the Sparkbrook, the Yvel, the P&S lightweight (Pearson and Sopwith), the Chater-Lea, the Campion, the Victoria (of Glasgow), the Hobart, the Olympic, the Ixion, the Bown-Villiers, the Wilkin, and the Saltley. The engine remained much the same, and continued to use a separate magneto, though it did have an oil pump to provide crankcase and piston lubrication via a hollow crankcase bolt - a design that Villiers had patented during 1914/1915.[6]

1926 Villiers 300cc engine

The Mark III engine embodied some changes to crankcase and bushes in 1919/1920, and in March 1920 the new Villiers Mark IV engine complete with flywheel magneto was revealed.[7] In May 1920 a new British Excelsior lightweight model was announced, this being the first motorcycle to show the new Villiers engine using the flywheel-magneto instead of separate magneto.[8]

In September 1922 Villiers announced the details of their new 1923 engine range,[9] which included 147cc, 250cc and 343cc engines. These engines featured a radial finned cylinder head, with both the inlet and exhaust port being at the front of the engine, and they all had the Villiers flywheel-magneto. While the 147cc relied on petrol-oil mixture for crankshaft lubrication, the two larger engines used a separate oil feed system. The new 250cc engine produced 25% more power than the older 269cc engine.

In 1926 Villiers introduced an even smaller engine, the 125cc with twin exhaust ports and side mounted carburettor, and in 1927 they introduced the 344cc twin 2-stroke. Villiers were to go on to produce a wide range of single and twin cylinder 2-strokes primarily for motorcycle use. At the end of the 1920s they also started producing engines for stationary use, with the first model being the water-cooled WX11 and in 1933 the air-cooled Mar-vil. Villiers engines were also used in lawn mowers, for example the 147cc engine was used in the Atco mowers of the 1920s and in 1931 it was joined by a 98cc Villiers engine, known as the Midget.

The Villiers company also had links to the Seagull outboard marine engines, both of which owed their existence to John Marston. The Seagull engines used the Villiers flywheel magneto, and a 'Seagull-Villiers' carburetor.

In 1936, L. E. Baynes and Sir John Carden, trading as Carden-Baynes Aircraft of Heston Aerodrome, launched the Carden-Baynes Auxiliary, a light aircraft which was essentially a motorized Abbott-Baynes Scud 3 glider. This carried a retractable 249 cc Villiers engine driving a push-propeller and producing 9 bhp, and the fuel tank held enough to run the engine for thirty minutes. The 249 cc Carden-Baynes Auxiliary is believed to be the lowest-powered aircraft in the history of powered flight.

Production during World War Two

During the war part of Villiers production was again turned to fuses for shells, with over 10 million produced, although they continued to make engines and cycleparts. Their engines were also used in small motorcycles designed for air drop with paratroopers - the Excelsior Welbike and the James ML paratrooper's machine known as the 'Clockwork Mouse'.

Post-war production

In 1956, Villiers produced its two millionth engine and presented it to the Science Museum in London.

In 1957 Villiers absorbed JA Prestwich Industries, makers of the J.A.P. engines. In 1962 the company were claiming that:

"jointly the two companies produce a vast range of two-stroke and four-stroke petrol engines and four-stroke diesel engines from 1/3 to 16 b.h.p. These are the engines which power many of Britain's two-stroke motor cycles, scooters and three wheelers, and the great majority of the motor mowers, cultivators, concrete mixers, generating sets, elevators, pumping sets. etc."

Villiers manufactured a range of single and twin two-stroke engines (from 98 cc to 325  cc) for light motorcycle and vehicle manufacturers until the 1960s.

In the early 1960s, the company was taken over by Manganese Bronze, and in 1966 together with AMC became Norton-Villiers, and in 1972 merged with the BSA group to become Norton-Villiers-Triumph, which eventually went into liquidation in 1978.

References

Notes

  1. 1.0 1.1 Von Harten & Marston (1979), p. 58
  2. "55 two-stroke and lightweight motorcycles", Motor Cycle, July 23rd, 1914
  3. "Latest Designs", Motor Cycle, October 15th, 1914, pp436-437
  4. "For Sale 1915 Hobart-Villiers", Motor Cycle, July 6th, 1916, Advertisements P26
  5. 'Improvements in or relating to Magneto-devices for Internal-combustion Engines', Patent GB111391, 31-1-1917
  6. 'Improvements in Oil Supply Systems for Crank Chambers and the like', Patent GB191509423, 1915
  7. "A New Flywheel Magneto", The Motor Cycle, March 25th, 1920, p363
  8. "New Machines and an Old Name", The Motor Cycle, May 13th, 1920, p540
  9. "Three Sizes of Villiers Engine", The Motor Cycle, September 28th, 1922, pp437-438

Bibliography

  • Lua error in package.lua at line 80: module 'strict' not found.

External links