Waltham Watch Company

Waltham Watch Company

Industry	Horology
Founded	1850
Headquarters	Waltham, Massachusetts, United States
Products	Watches, clocks & aircraft clocks
Subsidiaries	Waltham International SA
Footnotes / references see Waltham International SA (Switzerland) & Waltham Aircraft Clock Corporation, Alabama (U.S.A.)

The Waltham Watch Company, also known as the American Waltham Watch Co. and the American Watch Co., produced about 40 million watches, clocks, speedometers, compasses, time fuses, and other precision instruments between 1850 and 1957. The company's historic manufacturing facilities in Waltham, Massachusetts have been preserved as the American Waltham Watch Company Historic District.

History

In 1850, at Roxbury, Massachusetts, David Davis, Edward Howard, and Aaron Lufkin Dennison formed the company that would later become the Waltham Watch Company. Their revolutionary business plan was to manufacture the movement parts of watches so precisely that they would become fully interchangeable. Based upon the experience of earlier failed trials, Howard and Dennison eventually perfected and patented their precision watch making machines, creating what has been called the American System of Watch Manufacturing.

American Horologe Company (Warren Manufacturing Company)

The original name of the company, which began operations in 1851, is unclear. Some sources say the name was the "American Horologe Company." However, in 1886, Dennison stated that the first company name was the Warren Manufacturing Company, named for General Warren of Roxbury, a famous soldier of the War of Independence. The word "watch" was specifically omitted to retain secrecy of the novel operation.

In 1851, production began in a new factory building. In late 1852, the first watches were complete. The first 17 watches, which ran for 8 days, and were marked "Howard, Davis & Dennison," were distributed among company officials. Number 1, given to Howard, is now at the Smithsonian Institution. Numbers 18 to 100 were named "Warren, Boston" and the following 800 "Samuel Curtis," after the financial backer of the company. A few, marked "Fellows & Schell," sold for $40. January 1853 saw the introduction of the "P.S. Bartlett" watch, named for early employee Patten Sargeant Bartlett.

Boston Watch Company

In September 1853 the company was renamed the Boston Watch Company. A new factory was built in Waltham, Massachusetts, on the banks of the Charles River, which was subsequently greatly expanded. In October 1854 the company moved into the new factory. These buildings of the factory were added to the National Register of Historic Places in 1989.

The next movements manufactured (1001-5000) were marked "Dennison, Howard, & Davis", "P.S.Bartlett", and "C.T. Parker". The company had financial difficulties and Howard left to form E. Howard & Co.

Appleton Tracy & Company

Upon bankruptcy, the company was sold at auction to Royal E. Robbins, who reorganized it under the new name Appleton Tracy & Company (ATCo) in May 1857. The next movements produced, Serial numbers 5001 to 14,000, were used in the Waltham Model 1857 watch, the first pocket watch produced in America of standard parts. The "C.T. Parker" was introduced as the 1857 model. 399 units were made. Also 598 chronometers were manufactured.

American Watch Company

In January 1859 the Waltham Improvement Company merged with Appleton, Tracy & Company, forming the American Watch Company (AWCo). In 1861, as the country entered the American Civil War, production stopped. The company decided to downsize to the lowest possible level to keep the factory open, which was successful.

After the Civil War, the company became the main supplier of railroad chronometers to various railroads in North America and more than fifty other countries. In 1876, the company showed off the first automatic screw making machinery and obtained the first Gold Medal in a watch precision contest at the Philadelphia Centennial Exposition.

American Waltham Watch Company

In 1885 the company name changed to the American Waltham Watch Company (AWWCo).

Magazine advertisement from 1913.

Waltham Watch Company

In 1907 the company name changed to Waltham Watch Co. (WWCo), in 1923 briefly to the Waltham Watch and Clock Company and finally in 1925 to the Waltham Watch Company (WWC).

Waltham model 1899 pocketwatch movement.

Two high-quality groups of watches were produced by the company for orders placed by the Canadian Pacific Railway. One large group has the shield and beaver emblem of the Railway engraved on the movements, and is known as the "CPR" type. The second group has "Canadian Railway Time Service" engraved on the movements, and is known as the "CRTS" type. They are both highly prized by collectors.

Serial numbers

Waltham model 1899 pocket watch face

Every watch movement that the company produced was engraved with an individual serial number. That number can be used to estimate the date of production. Volunteers have created a database of Waltham serial numbers, models and grades, and descriptions of observed watches.

Waltham Precision Instruments Company

The company closed its factory doors and declared bankruptcy in 1949, although the factory briefly reopened a few times, primarily to finish and case existing watch inventory for sale. Several different plans were presented to restart the business, but all failed for various reasons. In 1958, the company got out of the consumer watch business completely, and reorganized into the Waltham Precision Instruments Company. All remaining watch inventory had been sold to the Hallmark Watch Company the previous year, and rights to the "Waltham" trademark were sold to a new Waltham Watch Company incorporated in Delaware in exchange for stock.

Specialized clocks and chronographs for use in aircraft control panels continued to be made in the Waltham factory by the Waltham Precision Instruments Company until the company was sold in 1994. The company is now based in Alabama, as the Waltham Aircraft Clock Corporation.

Waltham International SA Switzerland

Before the Waltham Watch Company went out of business in 1957, it founded a subsidiary in Switzerland in 1954, Waltham International SA. Waltham International SA retains the right to the Waltham trade name outside of North America, and continues to produce mechanical wrist watches and mechanical pocket watches under the "Waltham" brand.

Hallmark Watch Company

During their restructuring efforts in the 1950s, Waltham opened an office in New York for the purposes of importing Swiss watch movements and cases. Due to restrictions placed on the company by its main creditor, the Restructuring Finance Corporation, they could not sell these watches directly, so they were sold through an independent company, the Hallmark Watch Company.

Waltham Watch Company (Delaware)

The Waltham Watch Company (later known as Waltham of Chicago) was founded by one of the executives of the Hallmark Watch Company to carry on the Waltham trade name in the watch business. In exchange for rights to the name, existing Waltham Watch Company (Mass) shareholders received 1 share of the new company for every 5 shares of the original company.

In 1959, the Waltham Watch Company merged with the Hallmark Watch Company, giving the new company access to replacement parts to service existing Waltham watch owners. The company came under much scrutiny by the Federal Trade Commission throughout the 1960s, and ultimately was forced to change its advertising and branding policies to clearly indicate that it was not directly related to the original Waltham company, and that its products were not made in America.

Today

American Waltham Watch Company Historic District
U.S. National Register of Historic Places
U.S. Historic district
The company's old Waltham factory
Location	185-241 Crescent Street, Waltham, Massachusetts
Coordinates
Architect	Unknown
Architectural style	Queen Anne, Romanesque
MPS	Waltham MRA
NRHP Reference #	89001501
Added to NRHP	September 28, 1989

Waltham International SA manufactures and distributes Waltham Swiss Made watches in the luxury watch market. After a period when the sales has been concentrated in the Japanese market, since 2011 the majority of the company has been taken by the American entrepreneur Antonio DiBenedetto.

In February 1994, Prime Time Clocks purchased the last remaining product line, the mechanical aircraft clock, was purchased from Waltham Precision Instruments and moved to Ozark, Alabama. The company then incorporated in the state of Alabama under the name of Waltham Aircraft Clock Corporation.

Historic Waltham watches

Abraham Lincoln's Watch

Upon giving the Gettysburg Address in 1863, Abraham Lincoln was presented with a William Ellery, key wind watch Waltham Model 1857, serial number 67613. This watch is now in the collection of the National Museum of American History at the Smithsonian Institution in Washington, DC.

Waltham speedometer in a Ford

The 1937 Ford sedans had Waltham speedometers, reputedly the only speedometer in a Ford to display the name of its manufacturers. A testor at the time was quoted as saying that accuracy had to be "plus or minus 10 MPH".

Waltham Watch and the race to the moon

In early 1962, Massachusetts Institute of Technology (MIT) engineers began work on the Apollo navigation system. The engineers' starting point was MIT's revolutionary guidance system, which included gyroscopes and instruments for measuring changes in direction. The guidance system was high mechanical technology, like the precision parts in a watch. MIT. engineers, students and staff, led by Dr. Charles Stark Draper, worked closely with the Waltham Watch Company. The MIT team learned how to work with high precision machining while under the operation and direction of military contractor Raytheon Space and Information Systems Division Waltham Operations. Mechanical gyroscopes, spinning with ever-higher precision, very low friction, and very low wear, required the utmost accuracy and absence of even the most minute defect. Nobody had ever tried to manufacture precision instruments that would work with such accuracy before the Waltham team. It is said that the hygiene and cleanliness rules of the team were so strict that women were not allowed to wear makeup and if someone had just come back from a sunny vacation, they were forbidden to work near the assembly area for fear that they could have skin flaking off from their suntans.

Waltham watch on the moon

In 1996, astronaut David Scott, commander of the Apollo 15 mission in 1971, stated that he wore a Waltham watch on his third lunar EVA when his standard Omega Speedmaster Professional chronograph became damaged. In 2014, he confessed that he had made a mistake - "it was a Bulova, not a Waltham."

See also

• Elgin Watch Company
• Gruen Watch Co.
• Hamilton Watch Company
• Illinois Watch Company
• National Register of Historic Places listings in Waltham, Massachusetts

Further reading

• Carosso, Vincent P., The Waltham Watch Company: A Case History, Bulletin of the Business Historical Society, Vol. 23, No. 4 (Dec., 1949), pp. 165–187, published by The President and Fellows of Harvard College
• Engle, Tom; Richard E. Gilbert; and Cooksey Shugart, Complete Guide to Watches, Twenty Seventh Edition, January 2007, ISBN 1-57432-553-1
• Sandburg, Carl, Lincoln Collector: The Story of Oliver R. Barrett's Great Private Collection, Harcourt, Brace and Company, 1949
• Shugart, Cooksey, The Complete Guide to American Pocket Watches, 1981, ISBN 0-517-54378-8

External links

• Official Waltham Watches Website
• Waltham Watch Company Records at Baker Library Historical Collections, Harvard Business School
• Waltham Aircraft Clock Corporation.
• Extensive collection of Waltham watches
• Making Watches in Waltham, 1867 New York Times article
• NAWCC: National Association of Watch & Clocks Collectors