This is a good article. Click here for more information.

WindSeeker

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
WindSeeker
250px
Windseeker Cedar Point.jpg
WindSeeker at Cedar Point
Canada's Wonderland
Area Action Zone
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Operating
Cost US$5,000,000
Opening date May 24, 2011[1]
Replaced Jet Scream
Carowinds
Area Carolina RFD[2]
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Operating
Cost $6,500,000[3]
Soft opening date March 30, 2012[4]
Opening date March 31, 2012[5]
Cedar Point
Area Beach Front – Next to Beach Entrance
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Operating
Cost $5,000,000
Opening date June 14, 2011[6]
Kings Dominion
Area Candy Apple Grove[7]
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Operating
Cost $6,500,000[8]
Opening date April 6, 2012[9]
Replaced El Dorado
Kings Island
Area Coney Mall
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Operating
Cost $5,000,000
Opening date June 21, 2011[10]
Knott's Berry Farm
Area Fiesta Village
Status Relocated To Worlds of Fun
Cost $5,000,000
Opening date Mid-August 2011[11]
Closing date September 19, 2012[12]
Replaced Fiesta BBQ (Restaurant)
Worlds of Fun
Area Americana
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Status Operating
Opening date 2014
General statistics
Attraction type Tower swinger
Manufacturer Mondial
Model Wind Seeker[13]
Height 301 ft (92 m)
Speed 30 mph (48 km/h)
G-force 1.5
Capacity 960 riders per hour
Vehicles 32
Riders per vehicle 2
Duration 3 minutes
Height restriction 52 in (132 cm)
x20px Fast Lane available at all parks

WindSeeker (known as SteelHawk at Worlds of Fun) is a 301-foot-tall (92 m) swing ride at several Cedar Fair parks. The rides are Wind Seeker models manufactured by Mondial.[13] They opened for the 2011 season at Canada's Wonderland in Ontario, Cedar Point and Kings Island in Ohio, and Knott's Berry Farm in California. Carowinds in North Carolina and Kings Dominion in Virginia opened their WindSeekers in 2012. The first four each cost US$5,000,000, and the next two each cost $6,500,000. Cedar Fair relocated the Knott's Berry Farm WindSeeker to Worlds of Fun in 2014, where it is known as SteelHawk.[12]

The three-minute ride features 32 suspended twin seats (64 seats altogether) spinning around a central tower. A lighting package was installed on all four WindSeekers,[14] consisting of strips of LED lights mounted on the arms that support the swings and (except at Knott's Berry Farm[15]) colored floodlights to illuminate towers from above.

Canada's Wonderland was the first of the four parks to open its WindSeeker in 2011. On May 24, 2011, the ride was only open for a brief time before problems caused it to be closed for repairs;[1] it re-opened the week of June 10.[16] The second WindSeeker was opened to the public at Cedar Point on June 14, 2011,[6] the third on June 21, 2011, at Kings Island,[10] the fourth in mid-August 2011 at Knott's Berry Farm,[11][17] the fifth WindSeeker to open was Carowinds' model which soft-opened on March 30, 2012[4] and officially opened to the public on March 31, 2012[5] and the latest one to open was the sixth WindSeeker at Kings Dominion which officially opened to the public on April 6, 2012.[9]

On September 21, 2012, Cedar Fair announced the temporary closure of all WindSeekers in response to two incidents at Knott's Berry Farm.[18] All the installations, excluding Knott's Berry Farm, later reopened.[19][20] The Knott's Berry Farm installation remain closed for 11 months until it was announced it would be relocated to Worlds of Fun.[12]

History

On their Facebook pages throughout August 2010, several Cedar Fair amusement parks hinted frequently at a new ride to be opened in 2011. On August 24, 2010, Canada's Wonderland, Cedar Point, Kings Island, and Knott's Berry Farm all announced that they would be adding a Mondial WindSeeker, to open sometime in spring 2011.[21][22][23][24]

Construction of the WindSeekers at Canada's Wonderland, Cedar Point, and Kings Island began in late October and early November 2010. To install them, Canada's Wonderland's Jet Scream ride was removed and Cedar Point's Ocean Motion was moved to the former Demon Drop site.[25][26][27] Construction was scheduled to begin around the same time at Knott's Berry Farm, where the Sky Cabin observation tower was to be removed to make way for it.[24] On January 7, 2011, however, it was announced that their WindSeeker would not replace Sky Cabin but instead be located in the Fiesta Village section of the park.[28] Work began almost immediately after this announcement.[29]

Kings Island's WindSeeker was originally scheduled to be the first to open, on April 30, 2011,[30] but the opening was delayed because of bad weather[31] and eventually took place on the morning of June 21, 2011.[10] It was the first WindSeeker to use the Fast Lane program.[26]

File:Canada's Wonderland WindSeeker.jpg
WindSeeker in operation at Canada's Wonderland.

The WindSeeker at Canada's Wonderland was originally scheduled to open on May 8, 2011, one week after that of Kings Island.[32] On May 24, 2011, after problems were discovered during testing, Canada's Wonderland announced on their Facebook page that it would open to the public later that day,[33] but it was quickly closed again when further mechanical problems were discovered.[1] From May 24 to mid-June 2011, the ride was intermittently closed because of a variety of problems, most of which have since been resolved. At the beginning of October 2011, the hydraulic dampers used on the Knott's Berry Farm model were added to reduce the amount of swing movement even more.[34]

Cedar Point's WindSeeker was originally scheduled to open on May 14, 2011, two weeks after that of Kings Island.[35] After almost a month delays in construction and testing due to bad weather, it opened on June 14, 2011.[6]

Before the decision to keep the Sky Cabin at Knott's Berry Farm and to place its WindSeeker elsewhere, their WindSeeker was to have the same color scheme as others.[36] Also, instead of there being the red "UFO" on the top of the tower, original promotional materials show that a large purple "K" was to be placed on the top of the ride.[37] The ride opened in mid-August 2011 after three months of delays.[11][17] In late 2011, Fast Lane became available on the Knott's Berry Farm WindSeeker.[20] On September 7, the ride stalled for nearly three hours, and on September 19, it stalled again at the top of the tower for three and a half hours. Both incidents prompted Cedar Fair to close all other WindSeekers until an internal investigation is completed.[18] After the investigation was complete, all WindSeekers reopened except Knott's' model which was dismantled by December 11, 2013 to be sent to Worlds of Fun.[38]

File:WindSeeker (Carowinds) 01.jpg
WindSeeker and Sky Tower in operation at Carowinds

Throughout August 2011, the Carowinds web site had six different QR codes, each of which led the user to a web site giving a clue as to what the 2012 attraction might be.[39] When all six clues were put together, they made a picture that read "Voiceless it cries, wingless flutters, toothless bites, mouthless mutters, fun soars to new heights... August 24".[40] On August 24, 2011, it was officially announced that Carowinds would receive the fifth WindSeeker,[2][41] and on September 1, 2011, Kings Dominion officially announced that the sixth would open at the park in 2012.[42][43] The WindSeekers at Carowinds and Kings Dominion will have the same appearance as those at Canada's Wonderland, Cedar Point, and Kings Island and are expected to open in 2012.[2][42] Their construction started in early November 2011, after the parks closed for the season. At Kings Dominion, El Dorado was removed at the end of the 2011 season to make room for WindSeeker.[44] The first WindSeeker tower piece was installed there on January 20, 2012, and at Carowinds on January 23, 2012.[45][46] Carowinds soft-opened their version on March 30, 2012 to media and invited guests;[4] it opened to the public on March 31, 2012.[5] Kings Dominion officially opened their model on April 6, 2012.[9]

On August 30, 2013, Worlds of Fun announced that they would be adding SteelHawk, the relocated WindSeeker from Knott's Berry Farm.[47]

Accidents

Aside from the many minor problems all WindSeekers had in 2011, the first major accident occurred on June 2, 2012 on the Cedar Point installation. According to numerous news and rider reports, WindSeeker operated normally as the gondola made its way up the tower. Attached to the tower and gondola are a set of electrical cables that are located inside a plastic casing and are secured by two side panels to prevent the cables from moving around. At the top of the tower, winds were reportedly strong enough to push the electrical cables out of the socket on the tower causing the cables to move around freely. According to a rider riding WindSeeker at the time of the accident, as the gondola made its way back down the tower, the cables got stuck in the rotating gondola. The plastic casing began to be ripped apart as well as the cables causing the ride to come to a complete stop just over half way up the tower. Because the electrical cables had been damaged, Cedar Point employees had to manually bring down the gondola. Riders were stuck on the ride for over an hour and no one was injured. WindSeeker at Cedar Point remained closed until the cause of the accident was found and fixed.[48][49][50] The ride reopened on June 5, 2012.[51]

Problems

Different dampers on two WindSeekers: Cedar Point's former hydraulic dampers (left) and Kings Island's long-rod dampers (right), which are used on all models in the 2012 season.

The four WindSeekers opened in 2011 are based on the same prototype design by Dutch amusement ride manufacturer Mondial Rides. The WindSeeker at Canada's Wonderland was the first to be completed and thus the first to be tested. It was discovered during testing that the swings could rock back and forth once rotation reached full speed, and were close to hitting each other in some cases. Therefore, hydraulic dampers not included in the original design were added to all four WindSeekers to reduce this rocking.[52][53] Nevertheless, there were still incidents: on June 14, 2011, the swings on Cedar Point's WindSeeker began to sway in different directions, and some seats almost collided with each other. In one reported case, a rider had to extend his leg to stop the seat in front from hitting him. In another, a car collided with the kneecap of a rider who had closed their eyes.[54] Official explanations suggested that the hydraulic dampers could fail under high winds: apparently, high winds and the imbalance arising when some swings are full and others not could cause the swings to collide.[54] On June 29, 2011, Jennifer Valentyne of Breakfast Television Toronto rode the WindSeeker at Canada's Wonderland for her "Live-Eye" spot on the show. When the swings reached the top of the tower, the seats began swinging and hitting each other. As the ride continued, Breakfast Television hosts Kevin Frankish and Dina Pugliese asked whether the seats were supposed to touch each other, but received no response.[55]

Additional problems were discovered when the ride opened to the public. The WindSeeker at Canada's Wonderland underwent repairs for just over a week when it was discovered that one of the 32 pairs of seats had been removed for an unstated reason.[56] They were replaced and testing began shortly after. In another case at the same installation, riders were stuck at the top of the WindSeeker tower for 20 minutes when the swings did not come down.[57] Since these incidents, ride operations are suspended during high winds or heavy rain.

During the 2012 season, all of the WindSeekers except Kings Island's experienced incidents in which the ride stopped, stranding riders in the air.[18] Two such incidents occurred in September at Knott's Berry Farm, in one case leaving riders stranded at the top of the ride for nearly four hours, prompting the California Occupational Safety and Health Administration to order the ride shut down indefinitely on September 19 pending investigation of both the length of time riders were stranded and the actual causes of the incidents.[58] Two days later on September 21, Cedar Fair announced the closure of all other WindSeekers to conduct an internal review. The company said that until the review concludes, none of the rides would operate again.[18] The rides remained closed through the remainder of the 2012 season at the five seasonal parks but reopened at all parks in 2013, excluding Knott's Berry Farm's version which has been relocated.[19][20]

Structure

All six WindSeekers consist of the same parts in an identical structure. The 301-foot-tall (92 m) center tower is made up of eight parts. The base section is different from the other seven tower pieces because it supports the rest of the tower. On top of the eighth tower piece, there is a steel platform where workers and mechanics can observe the operation of the ride and perform maintenance. Above this platform is an element called the "red UFO" or the "Crown". The gondola itself has a number of parts. In the middle of the structure there are wheels that allow the swings to rotate as they go up and down the tower. The gondola is raised and lowered by cables linking the gondola structure to four sets of yellow wheels, each attached to a different section of the steel platform at the top of the tower.[59] Hydraulic dampers that were not in the original design were added to all the WindSeeker installations to reduce the movement of the swings while in operation.[52] The illustrations below show where the parts are located and what they look like.

A breakdown of the structure of WindSeeker at Kings Island, including both a full-length shot of the tower (left) and a close-up of the ride carriage and the top of the tower (right).

Ride experience

File:Knott's WindSeeker In Action.jpg
WindSeeker at Knott's Berry Farm. Note the difference in the colors

Riders sit in one of 64 seats placed around a central tower, which brings the gondola up and down. A restraint bar is fixed over the rider's lap to keep them firmly in their seat. There is no seat belt across the rider's lap, but there is one from the seat to the restraint bar in case the lock on the restraint bar fails. After the operators determine that it is safe to proceed, the gondola rises to the top of the tower to a musical accompaniment, beginning to spin slowly around the central tower and picking up speed as it ascends further. By the time it reaches the top, it is rotating around the tower at its full speed of approximately 30 miles per hour (48 km/h). The gondola remains at the top of the tower for just over a minute before starting its descent and immediately beginning to slow down. By the time it reaches the bottom of the tower, all rotation has ceased. One cycle of the ride lasts three minutes.[20][25][26][27]

Ride features

All the WindSeekers have speakers mounted to the inside of the gondola structure. They play 18 different tracks, among which are Hedwig's theme from the Harry Potter films, the theme songs from E.T., Star Trek: The Motion Picture, and Superman, and songs from Flight of the Valkyries.[42][60][61][62][63] At Cedar Point and Kings Island, the WindSeeker sign changes colors during night operation.[64][65] At Cedar Point, as the gondola makes its way up the tower, the LED lights at the top of the tower go out, making the tower invisible, though the LED lights on the gondola remains lit. When the gondola comes back down, the lights at the top of the tower come on again.[65] At Canada's Wonderland, the LED lights at the top of the tower remain on throughout the cycle, keeping the tower visible at all times.[66]

Different WindSeeker signs (Knott's on left and Kings Island's on right).

The WindSeeker at Knott's Berry Farm differed from the other five in several ways. Rather than white, blue, and green on the tower, Knott's adopted a color scheme using orange, purple, and yellow to reflect the Spanish California theme of the Fiesta Village section of the park.[67] The tower at Knott's had no lights at the top.[15] The ride's sign had a Mexican theme and did not light up.[68]

Reception

One week after the official opening of the ride at Cedar Point, attraction reviewer Brian Krosnick of Theme Park Tourist submitted an online review saying that it was "truly breathtaking". The review applauded "the inclusion of on-ride audio and such an exemplary lighting package", commenting that it was "more than anyone expected or could've asked for". Krosnick pointed out that, because of the location of the ride beside Lake Erie and the hot summers, the lights on the ride attract massive "clouds" of bugs. He felt the ride cycle might be too short for the type of ride, particularly the time spent at the top.[60] On July 13, 2011, Nick Sim, also from Theme Park Tourist, reviewed the ride at Kings Island and made similar remarks.[69] Los Angeles Times blogger Brady MacDonald complimented the "impressive nighttime spectacular from anywhere in the park". He reported having thoroughly enjoyed the ride at Knott's Berry Farm and said that he would ride it every time he visited the park.[70] Tom Sherer of the Sandusky Register praised Cedar Point's WindSeeker for having one of the best views of the park[71] and commented that it "isn't as extreme as a lot of people fear, unless you’re afraid of heights."[72] He criticized the name WindSeeker, pointing out that the ride closes in high winds.[73] Another reviewer called the view from Knott's Berry Farm's version "simply breathtaking" and urged readers to "get a ride on it as soon as you can". The same reviewer, however, also criticized the choice of music, suggesting that the park should have used "themes from more 'southwestern' films" to fit with the overall theme of the Fiesta Village area.[63] Members of the general public have also applauded the addition.[74]

See also

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 4.2 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 5.2 Lua error in package.lua at line 80: module 'strict' not found.
  6. 6.0 6.1 6.2 Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 9.2 Lua error in package.lua at line 80: module 'strict' not found.
  10. 10.0 10.1 10.2 Lua error in package.lua at line 80: module 'strict' not found.
  11. 11.0 11.1 11.2 Lua error in package.lua at line 80: module 'strict' not found.
  12. 12.0 12.1 12.2 Lua error in package.lua at line 80: module 'strict' not found.
  13. 13.0 13.1 Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. 15.0 15.1 Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. 17.0 17.1 Lua error in package.lua at line 80: module 'strict' not found.
  18. 18.0 18.1 18.2 18.3 Lua error in package.lua at line 80: module 'strict' not found.
  19. 19.0 19.1 Lua error in package.lua at line 80: module 'strict' not found.
  20. 20.0 20.1 20.2 20.3 Lua error in package.lua at line 80: module 'strict' not found.
  21. Lua error in package.lua at line 80: module 'strict' not found.
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. 24.0 24.1 Lua error in package.lua at line 80: module 'strict' not found.
  25. 25.0 25.1 Lua error in package.lua at line 80: module 'strict' not found.
  26. 26.0 26.1 26.2 Lua error in package.lua at line 80: module 'strict' not found.
  27. 27.0 27.1 Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. Lua error in package.lua at line 80: module 'strict' not found.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.
  35. Lua error in package.lua at line 80: module 'strict' not found.
  36. Lua error in package.lua at line 80: module 'strict' not found.
  37. Lua error in package.lua at line 80: module 'strict' not found.
  38. Lua error in package.lua at line 80: module 'strict' not found.
  39. Lua error in package.lua at line 80: module 'strict' not found.
  40. Lua error in package.lua at line 80: module 'strict' not found.
  41. Lua error in package.lua at line 80: module 'strict' not found.
  42. 42.0 42.1 42.2 Lua error in package.lua at line 80: module 'strict' not found.
  43. Lua error in package.lua at line 80: module 'strict' not found.
  44. Lua error in package.lua at line 80: module 'strict' not found.
  45. Lua error in package.lua at line 80: module 'strict' not found.
  46. Lua error in package.lua at line 80: module 'strict' not found.
  47. Lua error in package.lua at line 80: module 'strict' not found.
  48. Lua error in package.lua at line 80: module 'strict' not found.
  49. Lua error in package.lua at line 80: module 'strict' not found.
  50. Lua error in package.lua at line 80: module 'strict' not found.
  51. Lua error in package.lua at line 80: module 'strict' not found.
  52. 52.0 52.1 Lua error in package.lua at line 80: module 'strict' not found.
  53. Lua error in package.lua at line 80: module 'strict' not found.
  54. 54.0 54.1 Lua error in package.lua at line 80: module 'strict' not found.
  55. Lua error in package.lua at line 80: module 'strict' not found.
  56. Lua error in package.lua at line 80: module 'strict' not found.
  57. Lua error in package.lua at line 80: module 'strict' not found.
  58. Lua error in package.lua at line 80: module 'strict' not found.
  59. Lua error in package.lua at line 80: module 'strict' not found.
  60. 60.0 60.1 Lua error in package.lua at line 80: module 'strict' not found.
  61. Lua error in package.lua at line 80: module 'strict' not found.
  62. Lua error in package.lua at line 80: module 'strict' not found.
  63. 63.0 63.1 Lua error in package.lua at line 80: module 'strict' not found.
  64. Lua error in package.lua at line 80: module 'strict' not found.
  65. 65.0 65.1 Lua error in package.lua at line 80: module 'strict' not found.
  66. Lua error in package.lua at line 80: module 'strict' not found.
  67. Lua error in package.lua at line 80: module 'strict' not found.
  68. Lua error in package.lua at line 80: module 'strict' not found.
  69. Lua error in package.lua at line 80: module 'strict' not found.
  70. Lua error in package.lua at line 80: module 'strict' not found.
  71. Lua error in package.lua at line 80: module 'strict' not found.
  72. Lua error in package.lua at line 80: module 'strict' not found.
  73. Lua error in package.lua at line 80: module 'strict' not found.
  74. Lua error in package.lua at line 80: module 'strict' not found.

External links