Concurrency (road)

From Infogalactic: the planetary knowledge core
(Redirected from Wrong-way concurrency)
Jump to: navigation, search
Signs indicating a concurrency of Interstate 93, U.S. Route 1, and Massachusetts Route 3 in Boston, Massachusetts

A concurrency in a road network is an instance of one physical road bearing two or more different highway, motorway, or other route numbers.[1] When two freeways share the same right-of-way, it is sometimes called a common section or commons.[2] Other terminology for a concurrency includes overlap,[3] coincidence,[4] duplex (two concurrent routes), triplex (three concurrent routes) multiplex (any number of concurrent routes),[5] dual routing or triple routing.[6][7]

Concurrent numbering can become very common in countries that allow it. Where multiple routes must pass through a single mountain crossing, or through a major city, it is often economically and practically advantageous for them all to be accommodated on a single physical road. In some countries, however, concurrent numbering is avoided by posting only one route number on road signs; these routes disappear at the start of the concurrency and reappear when it ends. Criticism of concurrencies include environmental intrusion,[8] as well as being considered a factor in road accidents.[9]

Overview

An extreme example: I-40, Business I-85, US 29, US 70, US 220, and US 421 run concurrently in Greensboro, North Carolina. US 220 and US 421 have since been rerouted from this concurrency.

Most concurrencies are simply a combination of two route numbers on the same physical road. This is often practically advantageous as well as economically advantageous; it may be better for two route numbers to be combined into one along riverways or through mountain valleys. Some nations allow for concurrencies to occur, however some nations specifically do not allow it to happen. In those nations which do permit concurrencies, it can become very common. In these countries, there are a variety of concurrences which can occur.

An example of this is the concurrency of I-70 and I-76 on the Pennsylvania Turnpike in western Pennsylvania. Interstate 70 merges with the Pennsylvania Turnpike so the route number can ultimately continue east into Maryland; instead of having a second physical highway built to carry the route, it is combined with the Pennsylvania Turnpike and the Interstate 76 designation.[10] A triple Interstate concurrency is found north of Madison, Wisconsin, with I-39, I-90, and I-94.[11] Wisconsin has another triple Interstate concurrency along the five-mile (8.0 km) section of I-41, I-43, and I-894 in Milwaukee, Wisconsin.[12] The concurrency of I-41 and I-43 on this roadway is an example of a wrong-way concurrency.

The longest Interstate highway concurrency is I-80 and I-90 for 265 miles (426 km) across Indiana and Ohio.[13]

There is an example of an eight-way concurrency: I-465 around Indianapolis and Georgia State Route 10 Loop around downtown Athens, Georgia. Portions of the 53-mile (85 km) I-465 overlap with I-74, US 31, US 36, US 40, US 52, US 421, SR 37 and SR 67—a total of eight other routes. Seven of the eight other designations overlap between exits 46 and 47 to create an eight-way concurrency.[14]

Regional examples

North America

The QEW concurrent with Highway 403 in Ontario

In the United States, concurrencies are simply marked by placing signs for both routes on the same or adjacent posts. The federal Manual on Uniform Traffic Control Devices prescribes that when mounting these adjacent signs together that the numbers will be arranged vertically or horizontally in order of precedence. The order to be used is Interstate Highways, U.S. Highways, state highways, and finally county roads, and within each class by increasing numerical value.[15]

Several states do not officially have any concurrencies, instead officially ending routes on each side of one.[lower-alpha 1] There are several circumstances where unusual concurrencies exist along state borders. One example occurs along the OklahomaArkansas state line. At the northern end of this border Oklahoma State Highway 20 runs concurrently with Arkansas Highway 43 and the two roads run north–south along the boundary.[17]

Concurrencies are also found in Canada. In Manitoba, the Trans-Canada Highway from Winnipeg to Portage la Prairie is concurrently signed with Yellowhead Highway.[18] In Ontario, the Queen Elizabeth Way and Highway 403 run concurrently between Burlington and Oakville, forming the province's only concurrency between two 400-series highways.[19]

Europe

Concurrency of the city beltway, European road and three first-class roads in Hradec Králové, Czech Republic
Concurrency of several cycling routes in Písek, Czech Republic

In the United Kingdom, routes do not run concurrently with others. Where this would normally occur, the roadway takes the number of only one of the routes (usually, but not always, the most important route), while the other routes are considered to have a gap and are signed in brackets (the equivalent of "to" signs in North America). An example is the meeting of the M60 and the M62 northwest of Manchester: the routes coincide for the 7 miles (11 km) between junctions 12 and 18 but the motorway between those points is only designated as the M60. European route numbers as designated by UNECE may have concurrencies (for instance E15 and E30 around Greater London), but as E-route numbers are unsigned and unused in the UK, the existence of these concurrencies is purely theoretical.

In Sweden and Denmark, the most important highways use only the European route numbers, which have cardinal directions. In Sweden the E6 and E20 run concurrently for 280 kilometres (170 mi). In Denmark the E47 and E55 run concurrently for 157 kilometres (98 mi). There are more shorter concurrencies. There are two stretches in Sweden and Denmark where three European routes run concurrently; these are E6, E20 and E22 in Sweden, and E20, E47 and E55 in Denmark. Along all these concurrencies, all route numbers are signposted.[20]

In the Czech Republic, the European route numbers are only additional and are always concurrent with the state route numbering, usually highways or first-class roads. In the state numbering system, concurrences exist only in first-class and second-class roads; third class roads do not have them. The local term for such concurrences is peáž (somehow derived from the French word péage). In the road register, one of the roads is considered as the main ("source") road and the others as the péaging (guest) roads. The official road map enables a maximum of five concurrent routes of the intrastate numbering system.[21] Cycling routes and hiking routes are often concurrent.

The Middle East

In Israel, two freeways, the Trans-Israel Highway (Highway 6), and Highway 1 run concurrently just east of Ben Shemen Interchange. The concurrency is officially designated "Daniel Interchange", providing half of the possible interchange directions. It is a 1-mile (1.6 km) segment consisting of eight lanes providing high-speed access between the two highways. Access from Highway 1 west to Highway 6 south and Highway 6 north to Highway 1 east is provided via Route 431, while access between Highway 1 east to Highway 6 north and Highway 6 south to Highway 1 west are provided at Ben Shemen Interchange. The other movements are provided through the concurrency.[22]

Wrong-way concurrencies

This westbound highway in southwestern Virginia simultaneously carries Interstate 77 and Interstate 81 in opposite directions. The wrong-way concurrency is also reflected in U.S. Route 52 and U.S. Route 11, which are concurrent with I-77 and I-81, respectively.
An example of a wrong-way concurrency in Oklahoma City, Oklahoma; the wrong-way concurrency is highlighted in red.

As highways in the United States and Canada are usually signed with assigned cardinal direction based on primary orientation, it is possible for a stretch of roadway shared between two highways to be signed with opposite, conflicting cardinal directions. Wrong-way concurrency refers to this situation. The road itself is likely to be actually pointed in a third direction. For example, near Wytheville, Virginia, there is a concurrency between I-77 (which runs primarily north–south, as it is signed) and Interstate 81 (which runs primarily northeast-southwest but is also signed north-south). The road itself is oriented east-west and carries the two Interstates signed in opposite directions. So one might simultaneously be on I-77 north and I-81 south, while actually traveling due west.[23]

An unusual example of a three-directional concurrency occurs near the town of Starks, Illinois. To take advantage of an underpass beneath a railroad, US Route 20, Illinois Route 72 and Illinois Route 47 all converge. The net result is that a driver can be traveling east on US 20, west on IL 72, and south on IL 47 (the actual compass direction) all at the same time.[24]

Effect on exit numbers

Often when two routes with exit numbers overlap, one of the routes has its exit numbers dominate over the other and can sometimes result in having two exits of the same number, albeit far from each other along the same highway (although in one case the number 96 is only six miles apart). An example of this is from the concurrency of I-94 and US 127 near Jackson, Michigan. The concurrent section of freeway has an exit with M-106, which is numbered Exit 139 using I-94's mileage-based numbers. US 127 also has another Exit 139 with the southern end of the US 127 business loop in Mount Pleasant, Michigan.[25]

However, there are also instances where the dominant exit number range is far more than the secondary route's highest exit number, for example the concurrency of I-75 and I-85 in Atlanta, Georgia—where I-75 is dominant—the exit numbers range from 242 to 251 while I-85's highest mile marker in Georgia is 179.[26]

Consolidation plans

US 1/9 concurrency signed on one shield

Some brief concurrencies in the past have been eliminated by reassigning the designations along the roadways. This can involve scaling back the terminus of one designation to the end of a concurrent section. At the same time, there could be an extension of another highway designation that is used to replace the newly shortened designation with another one.

Between states, US 27 in Michigan previously ran concurrently with I-69 from the Michigan–Indiana state line to the Lansing, Michigan, area. From there it turned northwards to its terminus at Grayling. In 1999, the Michigan and Indiana departments of transportation petitioned the American Association of State Highway and Transportation Officials for permission to truncate US 27 at Fort Wayne, Indiana.[27] In 2002, Michigan removed the US 27 designation from I-69 and extended the US 127 designation from Lansing to Grayling.[28] MDOT's stated reason for the modification was to "reduce confusion along the US 27/US 127 corridor".[29] After US 27's signage was removed, the highway north of the Lansing area was renumbered US 127, and the US 27 designation was removed from I-69.[29]

Some consolidation schemes involve the use of incorporating two single-digit numbers onto one marker, as along the U.S. Route 1/9 concurrency in northern New Jersey.[30] In the mid-20th century, California had numerous concurrencies, but the California Legislature removed most of them in a comprehensive reform of highway numbering in 1964.[31]

See also

Notes

  1. Arkansas's highways exist in many officially designated "sections" rather than form concurrencies. Arkansas Highway 131 exists in five sections as an example.[16]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. Lua error in package.lua at line 80: module 'strict' not found.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Lua error in package.lua at line 80: module 'strict' not found.
  19. Lua error in package.lua at line 80: module 'strict' not found.
  20. Check Google Streetview at Lua error in package.lua at line 80: module 'strict' not found., Lua error in package.lua at line 80: module 'strict' not found. and neighboring locations[full citation needed]
  21. Číslo peažující silnice, explanatory notes to the road map, Ředitelství silnic a dálnic (Directorate of Roads and Highways)
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. Lua error in package.lua at line 80: module 'strict' not found.
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. Lua error in package.lua at line 80: module 'strict' not found.
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. 29.0 29.1 Lua error in package.lua at line 80: module 'strict' not found.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.

External links