Xinfengjiang Dam

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Xinfengjiang Dam
Xinfengjiang Dam is located in China
Xinfengjiang Dam
Location of Xinfengjiang Dam in China
Country China
Location Heyuan City
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Construction began 1958
Opening date 1962
Dam and spillways
Impounds Xinfeng River
Height 105 m (344 ft)
Length 440 m (1,444 ft)
Width (crest) 5 m (16 ft)
Dam volume 1,060,000 m3 (37,433,547 cu ft)
Spillways 2
Spillway type Service, surface gate-controlled overflow
Auxiliary tunnel
Spillway capacity Service: 11,400 m3/s (402,587 cu ft/s)
Tunnel: 1,700 m3/s (60,035 cu ft/s)
Reservoir
Creates Xinfengjiang Reservoir
Total capacity 13,900,000,000 m3 (11,268,913 acre·ft)
Active capacity 5,740 km2 (2,216 sq mi)
Surface area 370 km2 (143 sq mi)[1]
Power station
Commission date 1960-1977
Hydraulic head 81 m (266 ft) (max.)
Turbines 3 x 72.5 MW 1 x 75 MW Francis-type
Installed capacity 292.5 MW
315 MW (max. planned)

The Xinfengjiang Dam (also known as the Xinfeng Dam) is a gravity dam on the Xinfeng River, 8 km (5 mi) upstream of its confluence with the Dong River, and just west of Heyuan City in Guangdong Province, China. The dam's power station has a 292.5 MW installed capacity and its reservoir supplies water for farming along with drinking water to Guangzhou, Shenzhen and Hong Kong. Construction on the dam began in 1958, the first generator was operational in 1960 and the dam complete in 1962. The dam's reservoir-filling is attributed to several earthquakes within the project area including a 6.1-magnitude (Mw) on March 19, 1962.

Background

Construction on the dam began in 1958, a total of 1,550,000 m3 (54,737,733 cu ft) of earth was excavated at the construction site. On October 20, 1959 the reservoir behind the dam began to fill and in November there were several small earthquakes within the reservoir zone. When the water level reached 81 m (266 ft) above sea level (ASL) in May 1960, there were three to four earthquakes at a 3.1-Mw and on July 18, when the water level 90 m (295 ft) ASL, a 4.3-Mw earthquake occurred. On March 19, 1962 when the reservoir reached 110.5 m (363 ft) ASL there was a 6.1-Mw earthquake with an epicenter 1.1 km (1 mi) downstream from the dam which destroyed several houses in the area.[2][3] After the earthquake and as a precaution, cavities within the foundation were reinforced with concrete. This and other upgrades brought the dam to a 9.5-Mw-rated resistant design.[2]

Design

The dam is a 105 m (344 ft) tall, 440 m (1,444 ft) wide gravity dam. Its crest width is 5 m (16 ft) and it has a structural volume of 1,060,000 m3 (37,433,547 cu ft) of concrete. Above the dam is a 5,740 km2 (2,216 sq mi) drainage area and it withholds a reservoir of 13,900,000,000 m3 (11,268,913 acre·ft). The dam contains a surface controlled spillway with three floodgates, each with a 3,800 m3/s (134,196 cu ft/s) maximum discharge capacity for a total of 11,400 m3/s (402,587 cu ft/s). The discharge tunnel on the dam's left bank has a 10 m (33 ft) diameter, is 778 m (2,552 ft) long and has a 1,700 m3/s (60,035 cu ft/s) capacity. The dam's reservoir has a 3,300,000,000 m3 (2,675,354 acre·ft) flood storage capacity, rated for a once in a hundred-year flood. The dam's power station is located at its base (toe) and contains four Francis turbine generators. Three are rated at 72.5 MW and the fourth at 75 MW for a total design capacity of 292.5 MW but the power plant can operate at a maximum 315 MW after later upgrades.[2][4]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.

de:Xinfeng-Stausee

no:Xinfengjiang-demningen zh:新丰江水库