Bit Manipulation Instruction Sets

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Bit Manipulation Instructions Sets (BMI sets) are extensions to the x86 instruction set architecture for microprocessors from Intel and AMD. The purpose of these instruction sets is to improve the speed of bit manipulation. All the instructions in these sets are non-SIMD and operate only on general-purpose registers.

There are two sets published by Intel: BMI (here referred to as BMI1) and BMI2; they were both introduced with the Haswell microarchitecture. Another two sets were published by AMD: ABM (Advanced Bit Manipulation, which is also a subset of SSE4a implemented by Intel as part of SSE4.2 and BMI1), and TBM (Trailing Bit Manipulation, an extension introduced with Piledriver-based processors as an extension to BMI1).[1]

In the description of a patch to the GNU binutils package, AMD explicitly revealed that the first iteration of "Zen", its third-generation x86-64 architecture, will not support TBM, XOP and LWP instructions developed specifically for the "Bulldozer" microarchitecture.[2]

ABM (Advanced Bit Manipulation)

ABM is only implemented as a single instruction set by AMD; all AMD processors support both instructions or neither. Intel considers POPCNT as part of SSE4.2, and LZCNT as part of BMI1. POPCNT has a separate CPUID flag; however, Intel uses AMD's ABM flag to indicate LZCNT support (since LZCNT completes the ABM).[3]

Instruction Description[4]
POPCNT Population count
LZCNT Leading zeros count

LZCNT is almost identical to the Bit Scan Reverse (BSR) instruction, but sets the ZF (if the result is zero) and CF (if the source is zero) flags rather than OF, and produces a defined result (the source operand size in bits) if the source operand is zero.

BMI1 (Bit Manipulation Instruction Set 1)

The instructions below are those enabled by the BMI bit in CPUID. Intel officially considers LZCNT as part of BMI, but advertises LZCNT support using the ABM CPUID feature flag.[3] BMI1 is available in AMD's Jaguar,[5] Piledriver[6] and newer processors, and in Intel's Haswell[7] and newer processors.

Instruction Description[3] Equivalent C expression[8]
ANDN Logical and not ~x & y
BEXTR Bit field extract (with register) (src >> start) & ((1 << len)-1)[9]
BLSI Extract lowest set isolated bit x & -x
BLSMSK Get mask up to lowest set bit x ^ (x - 1)
BLSR Reset lowest set bit x & (x - 1)
TZCNT Count the number of trailing zero bits N/A

BMI2 (Bit Manipulation Instruction Set 2)

Intel introduced BMI2 together with BMI1 in its line of Haswell processors. Only AMD has produced processors supporting only BMI1 without BMI2; BMI2 is supported by AMDs newest Excavator architecture.[10]

Instruction Description
BZHI Zero high bits starting with specified bit position
MULX Unsigned multiply without affecting flags, and arbitrary destination registers
PDEP Parallel bits deposit
PEXT Parallel bits extract
RORX Rotate right logical without affecting flags
SARX Shift arithmetic right without affecting flags
SHRX Shift logical right without affecting flags
SHLX Shift logical left without affecting flags

Parallel bit deposit and extract

The PDEP and PEXT instructions are new generalized bit-level compress and expand instructions. They take two inputs; one is a source, and the other is a selector. The selector is a bitmap selecting the bits that are to be packed or unpacked. PEXT copies selected bits from the source to contiguous low-order bits of the destination; higher-order destination bits are cleared. PDEP does the opposite, for the selected bits: contiguous low-order bits are copied to selected bits of the destination; other destination bits are cleared. This can be used to extract any bitfield of the input, and even do a lot of bit-level shuffling that previously would have been expensive. While what these instructions do is similar to a bit level gather-scatter SIMD instructions, PDEP and PEXT instructions (like the rest of the BMI instruction sets) operate on general-purpose registers.[11][12]

Below are a few 8-bit examples of these operations:[citation needed]

Input Selector example Parallel bit extract Parallel bit deposit
abcd'efgh 1111'0000 0000'abcd efgh'0000
abcd'efgh 1111'1100 00ab'cdef cdef'gh00
abcd'efgh 0101'0101 0000'bdfh 0e0f'0g0h
abcd'efgh 1101'1101 00ab'defh cd0e'fg0h
abcd'efgh 0001'1111 000d'efgh 000d'efgh

TBM (Trailing Bit Manipulation)

TBM consists of instructions complementary to the instruction set started by BMI1; their complementary nature means they do not necessarily need to be used directly but can be generated by an optimizing compiler when supported.[13] AMD introduced TBM together with BMI1 in its Piledriver[6] line of processors; AMD Jaguar and upcoming Zen processors do not support TBM.[5]

Instruction Description[4] Equivalent C expression[14]
BEXTR Bit field extract (with immediate) (src >> start) & ((1 << len)-1)
BLCFILL Fill from lowest clear bit x & (x + 1)
BLCI Isolate lowest clear bit x | ~(x + 1)
BLCIC Isolate lowest clear bit and complement ~x & (x + 1)
BLCMASK Mask from lowest clear bit x ^ (x + 1)
BLCS Set lowest clear bit x | (x + 1)
BLSFILL Fill from lowest set bit x | (x - 1)
BLSIC Isolate lowest set bit and complement ~x | (x - 1)
T1MSKC Inverse mask from trailing ones ~x | (x + 1)
TZMSK Mask from trailing zeros ~x & (x - 1)

Supporting CPUs

See also


  1. 1.0 1.1 "New "Bulldozer" and "Piledriver" Instructions" (PDF). Retrieved 2014-01-03.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  2. "AMD cuts 'Bulldozer' instructions from 'Zen' processors". Retrieved 2 April 2015.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  3. 3.0 3.1 3.2 "Intel Advanced Vector Extensions Programming Reference" (PDF). Intel. June 2011. Retrieved 2014-01-03.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  4. 4.0 4.1 "AMD64 Architecture Programmer's Manual, Volume 3: General-Purpose and System Instructions" (PDF). AMD. October 2013. Retrieved 2014-01-02.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  5. 5.0 5.1 5.2 "Family 16h AMD A-Series Data Sheet" (PDF). AMD. October 2013. Retrieved 2014-01-02.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  6. 6.0 6.1 Hollingsworth, Brent. "New "Bulldozer" and "Piledriver" instructions" (pdf). Advanced Micro Devices, Inc. Retrieved 11 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  7. 7.0 7.1 Locktyukhin, Max. "How to detect New Instruction support in the 4th generation Intel® Core™ processor family". Intel. Retrieved 11 December 2014.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  8. "bmiintrin.h from GCC 4.8". Retrieved 2014-03-17.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  9. "Chess Programming BMI1". Retrieved 2014-04-08.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  10. 10.0 10.1 "AMD Excavator Core May Bring Dramatic Performance Increases". X-bit labs. October 18, 2013. Retrieved November 24, 2013.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  11. "chessprogramming - BMI2". Retrieved 2014-02-09.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  12. Yedidya Hilewitz; Ruby B. Lee (August 2009). "A New Basis for Shifters in General-Purpose Processors for Existing and Advanced Bit Manipulations" (PDF). IEEE Transactions on Computers. pp. 1035&ndash, 1048. Retrieved 2014-02-10.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  13. "chessprogramming - TBM". Retrieved 2014-02-09.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  14. "tbmintrin.h from GCC 4.8". Retrieved 2014-03-17.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>
  15. "BIOS and Kernel Developer's Guide for AMD Family 14h" (PDF). Retrieved 2014-01-03.<templatestyles src="Module:Citation/CS1/styles.css"></templatestyles>

External links