Boxing ring

From Infogalactic: the planetary knowledge core
Jump to: navigation, search


An AIBA full-sized competition ring. Dimensions are 23 ft x 23 ft (20 ft x 20 ft inside), with a 3 ft platform height.

A boxing ring is the space in which a boxing match occurs. A modern ring, which is set on a raised platform, is square with a post at each corner to which four parallel rows of ropes are attached with a turnbuckle. Unlike its cousin the wrestling ring, the ropes in a boxing ring are generally connected together between the posts.

Construction

As there are a number of professional boxing organizations, the standards of construction vary. A standard ring is between 16 and 25 feet (4.9 and 7.6 m) to a side between the ropes with another 2 feet (0.61 m) outside. The platform of the ring is generally 3 to 4 feet (0.91 to 1.22 m) from the ground with the posts rising around 5 feet (1.5 m).

The ring itself has around 1 inch (25 mm) of padding covered by stretched canvas. The ropes are around 1 inch (25 mm) in diameter and held up on posts rising around 5 feet (1.5 m) at heights of 18, 30, 42, and 55 inches (.46, .76, 1.07, and 1.37 m).

Terminology

The name ring is a relic from when contests were fought in a roughly drawn circle on the ground. The name ring continued with the Jack Broughton rules in 1743, which specified a small circle in the centre of the fight area where the boxers met at the start of each round. The first square ring was introduced by the Pugilistic Society in 1838. That ring was specified as 24 feet (7.3 m) square and bound by two ropes. For these and other reasons, the boxing ring is commonly referred to as the "square circle".

See also

References

  • Lua error in package.lua at line 80: module 'strict' not found.