Burrell Smith

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Burrell Smith
Born (1955-12-16) December 16, 1955 (age 68)
Nationality American
Occupation Engineer, Inventor
Known for Designed the motherboard (digital circuit board) for the original Macintosh.

Burrell Carver Smith (born December 16, 1955) is an American engineer who, while working at Apple Computer, designed the motherboard (digital circuit board) for the original Macintosh. He was Apple employee #282, and was hired in February 1979, initially as an Apple II service technician.[1] He also designed the motherboard for Apple's LaserWriter, and designed a low-cost version of the Apple II that eventually became the Apple IIe, using the same innovative design techniques that he pioneered with the Mac.

Burrell was working in Apple's service department when he helped Bill Atkinson add more memory to an Apple II computer in an innovative fashion. Bill recommended him to Jef Raskin, who was looking for a hardware engineer to help him with his newly formed Macintosh project.[1] As a member of the design team,[2] Burrell designed five different motherboards during the course of Macintosh development, all of which used techniques based on Programmable Array Logic (PAL) chips to achieve maximum functionality with a minimal chip count.

Burrell left the company before releasing Apple's "Turbo Mac" design platform, which included an internal hard drive and a further simplified chipset.

He was later a co-founder of Radius Inc., and is retired and living in Palo Alto.[3]

Burrell reportedly suffered from schizophrenia during the 1990s.[4] Actor Lenny Jacobson portrayed him in the 2013 film, Jobs.

External links

References

  1. 1.0 1.1 http://folklore.org/StoryView.py?project=Macintosh&story=Well_See_About_That.txt&showcomments=1#comments
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Inside the Mac Revolution - Wired - 16 December 2004
  4. Steve Jobs by Walter Isaacson, page xv.


<templatestyles src="Asbox/styles.css"></templatestyles>