Kaligandaki A Hydroelectric Power Station

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Kaligandaki A Dam
File:Kaligandaki Hydro.jpg
The dam; intake (bottom), spillway (top)
Kaligandaki A Hydroelectric Power Station is located in Nepal
Kaligandaki A Hydroelectric Power Station
Location of Kaligandaki A Dam in Nepal
Official name Kaligandaki A Hydroelectric Power Station
Country Nepal
Location Mirmi, Syangja
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Purpose Power
Status Operational
Construction began 1997
Opening date 2002
Construction cost US$354.8 million (50 billion Nepali Rupees)
Owner(s) Nepal Electricity Authority
Dam and spillways
Type of dam Concrete gravity
Impounds Gandaki River
Height 44 m (144 ft)
Spillway type Radial gated
Reservoir
Total capacity 7,700,000 m3 (6,200 acre·ft)
Surface area 7.618 km2 (2.941 sq mi)
Power station
Name Kaligandaki A Hydroelectric Power Station
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Operator(s) Nepal Electricity Authority
Commission date 2002
Type Run-of-the-river
Hydraulic head 115 m (377 ft)
Turbines 3 x 48 MW Toshiba Francis-type
Installed capacity 144 MW
Annual generation 860 GWh

Kaligandaki A Hydroelectric Power Station is situated near Mirmi of Syangja District about 300 km to the west of Kathmandu and 100 km from Pokhara in the same direction in Nepal. The dam and headworks are situated on the Gandaki River at the confluence of the Andhikhola whereas the power house is located downstream, around a bend in the river, in Beltari (About 7 km towards the South-East of Mirmi).[1][2][3] A 5.9 km (3.7 mi) long headrace tunnel connects the reservoir to the power station which contains three 48 MW Francis turbine-generators. Owner and operator of the power plant is Nepal Electricity Authority.

It is a run-of-river type of project and currently is the largest power plant of any kind in Nepal with an installed capacity of 144 MW. Construction started in the year 1997 and was completed in the year 2002. The three turbine & generators Toshiba Make were commissioned in March, April and May 2002. It was constructed primarily to curb the ever increasing energy demand at that time and eliminate loadshedding prevalent due to the imbalance in demand and supply of energy. It was constructed with the financial aid of the Asian Development Bank with total costs reaching US$354.8 million (50 billion NPR (approx)).[4]

Transmission line

The power generated by the three turbines is evacuated to the central grid via a 132kV single circuit, a 66 kilometres (41 mi) long transmission line to Pokhara, and a 44 kilometres (27 mi) double circuit transmission line to Butwal. The electricity is sent to Lekhnath Municipality and Butwal (known as Butwal-1 and Butwal-2). A sub-station has been constructed in Lekhnath Municipality, Kaski district and the existing Jogikuti substation in Butwal has been upgraded.[5]

See also

References

  1. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
Retrieved from "https://infogalactic.com/w/index.php?title=Kaligandaki_A_Hydroelectric_Power_Station&oldid=689968351"